光热电站容量效益评估及影响因素研究

光热发电作为一种清洁能源,配置储热后具有良好的调节性能,近年得到大力发展。依据自身经济性,光热电站往往配备较大的储热装置,能够平移所吸收的光热能,且具有跨日调节能力,使得光热机组有一定替代常规机组带负荷的能力,即容量效益。本文提出一种基于等可靠性的光热电站容量效益评估方法,考虑了调峰方式、储热时长、新能源规模、光热电站规模对光热电站容量效益发挥的影响,采用基于数学优化的生产模拟仿真程序,以周为尺度,计算全年8760 h的系统运行状态,计及了机组启停、水电跨日调节、抽蓄跨日调节、光热电站的跨日调节等因素。最后通过对西北地区实际电网的仿真,验证了所提方法的有效性。     

STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

1. IntroductionSolar selective thiIl solid fil1us are the key part for solar heat collect'ors. But ll1ostfactories still produced solar absorptive filn1s by traditional tecIl11ology sucl1 as pai1ltillga1ld electrocl1eluical process that nlust result in po…     

Effect of oxygen precipitates in solar grade silicon on minority carrier lifetime and efficiency of solar cells

The effect of oxygen precipitates on minority carrier lifetime and performance of solar cell was studied by means of Fourier Transform Infrared Spectroscopy (FTIR), quasi-steady state photoconductance (QSSPCD), optical microscope, spectrumresponse and solar cell efficiency test. The minority carrier lifetime and performance of solar cell reduced depend on oxygen precipitates. A few of oxygen precipitates have formed after single-step annealing; and they do not impact the efficiency dramatically. Pre-annealing at 650 ℃ for 4 h enhances the oxygen precipitation when it is subjected to middle temperature annealing. The solar cells performance decayed sharply. Especially annealing at 950 ℃ for 3 h, the V os and I sc of cells decrease 12% and 25% respectively. Few oxygen precipitates have formed in silicon after high temperature annealing at about 1050 ℃ whether pre-annealing is used or not, and the performance of cells is notbe affected.     

太阳能吸热功能膜材质

材质中电子能级和振转能级决定光谱的选择性。     

Preparation of solar selective absorbing CuO coating for medium temperature application

A new method of preparing CuO solar selective absorbing coating for medium temperature is presented. After pretreatment, brass was overlaid with CuO by chemical plating. The effects of reactant concentration, reaction temperature and reaction time on the absorptivity of CuO coating were investigated. The optimized condition of preparing CuO coating was obtained. The CuO coating was analyzed with X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). In order to prolong the period of use, the CuO coating was protected by TiO₂. The experiment shows that the TiO₂/CuO coating is more heat-resistant, acid-resistant, and wear resistant than CuO coating, without losing absorptivity markedly. The TiO₂ coating can reduce emissivity and protect the CuO coating. Translated from Journal of Tianjin University, 2006, 39(12): 1485–1489 [译自: 天津大学学报]     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.     

相变储能材料的研究及应用新进展

综述了近年来相变储能材料的研究和应用新进展.介绍了相变材料的种类及各类相变材料特点,并对各类相变材料的性能、储能机理和优缺点进行了讨论;探讨了相变材料在太阳能利用、建筑节能等领域的应用;展望了未来相变材料的发展方向和应用前景.     

Effects of electrolyte in dye-sensitized solar cells and evaluation by impedance spectroscopy

Effects of the electrolyte of DSCs on impedance spectra were evaluated by changing concentration of redox couple, viscosity, and additives to electrolyte. The relation with current-voltage characteristics (I-V characteristics) was investigated. In many cases, the impedance component attributed to charge transfer at TiO₂|electrolyte interface demonstrated strong relation with the I-V characteristics. The recombination of electrons in TiO₂ with I₃⁻ in electrolyte was a key factor in determining performance of DSCs. To evaluate the effect of I₃⁻, diffusion-limiting current in the electrolyte for various viscosities was evaluated by cyclic voltammetry. When the short circuit current (SCC) was almost equal to the diffusion-limiting current, strong influence of the diffusion coefficient on the impedance spectra was observed: impedance arcs were enlarged as the diffusion coefficient was decreased. On the other hand, when the diffusion-limiting current was larger than the SCC, photo-excitation and electron injection processes became dominating factors in the DSCs performance. The SCC was regulated by the charge recombination process at TiO₂|electrolyte interface, and thus the impedance component ω₃ was related to the performance in such condition.     

LiNO3-NaNO3-KNO3三元熔盐材料的设计及热稳定性研究

采用共形离子溶液模型(conformalionic solution model, CIS) 在二元熔盐体系相图的基础上，对三元熔盐体系LiNO₃-NaNO₃-KNO₃进行了相图计算，得到该三元体系最低共熔点为117.7℃，相应的摩尔分数组成分别为x(LiNO₃) = 0.375，x(NaNO₃) = 0.075，x(KNO₃) = 0.550。按照热力学最低共熔点计算结果，采用熔融法制备了三元硝酸熔盐，通过DSC和TG实验测定其最低共熔点为118.3℃，这与计算得到的结果(117.7℃)基本一致。TG测试结果表明当温度低于587.2℃时，该三元熔盐体系较为稳定，其工作温度范围为118.3~587.2℃，该三元硝酸熔盐适合在太阳能热发电中作为高温传热蓄热材料使用。     

Solar Photocatalytic Degradation of Textile Dyes in TiO2 Suspended Solutions

The degradation and decolourization of direct dye (Everdirect supra turguoise blue, FBL), acidic dye (Isolan orange S-RL) and vat dye (Indanthren red FBB) have been investigated by solar/TiO2 process. The effects of solution pH, dye concentration, dosage of TiO2 and nano-size of TiO2 have been studied. The increase in initial pH (3, 5 and 11) and dye concentration decrease the removal rate. The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions, the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%. Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model (L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.