机械锁定式地层测试技术研究与应用

机械锁定式测试技术操作简单，测试一次成功率高，资料录取准确全面，且测试结束后可直接进行封堵作业；解封时，机械锁紧产生一个向上的震击力，有利于解封，没有换位机构的测试阀在关井期间使管柱处于自由拉伸状态，有利于保护油管。在N阀上部管柱中加1-2根伸缩接头，便可用于海洋井测试。     

The optimal diamond wheels for grinding diamond tools

Grinding is the most suitable process for manufacturing good quality diamond tools. In this paper, diamond wheels have been studied. From the grinding of polycrystalline diamond (PCD) insets, the effects of certain factors such as the bonding material, the grit size and structure of a diamond wheel have been investigated. It is concluded that vitrified bond diamond wheels are the most suitable for grinding PCDs and the recommended grit size is mesh number 1000, which can get a good surface quality within an appropriate time. The wheel structure is another important factor. Rougher wheels (mesh #800, #1000) with the softer grade scale P yield a higher material removal rate (MRR) than scale Q. However, a finer wheel (mesh #1200) needs a tougher structure to promote its grinding ability and to have a higher MRR.     

��������������˲��������̽��

四川目前生产的天然气中含硫天然气占７１％，而含硫天然气对高强度钻杆会产生硫化物应力腐蚀玻裂，因此，在含硫气井进行钻杆测试时，应重视钻杆的安全问题。文章探讨了高强度钻杆硫化物应力腐蚀玻裂的机理和影响钻杆脆断时间的各种因素，并提出在一定的条件下，高强度钻杆在含硫气并中进行测试是安全的。采用向钻杆内加缓蚀剂或内涂层钻杆，防硫油管测试，钻杆测试更加安全。建议继续开展高强度钻杆硫化物应力腐蚀玻裂时间的试验研究，以确定合理的钻杆测试安全时间。     

注入剖面五参数组合测井仪的改进

文章介绍了注入剖面五参数组合测井仪及对该仪器的改进与完善，特别是对流量计的结构进行了改进。流量计下端采用水阻尼和机械弹簧两种保护措施，有效地保护了涡轮；过芯加重改成通用加重下挂到涡轮流量计上，有效地减少了涡轮粘污，提高了组合测井仪的测井成功率。改进后测井成功率从60％提高到90％。同时。对数据处理与传输电路也进行了改进，新开发研制了PPM码数据传输体系，使组合仪耐温指标提高到175℃。     

山特维克可乐满公司切削刀具涂层技术的发展

介绍了山特维克可乐满公司切削刀具涂层技术的发展，并对该公司自1979年以来硬质合金涂层产品的发展情况进行了总结。     

C/C + +源代码风格检测工具的实现

文中给出了评价C／C 源代码风格的规则分类和检查工具的总体结构，阐述了代码检查工具的核心技术——扩展词法分析和扩展语法分析，给出了代码检测工具的应用实例。     

Minimizing the number of tool switches on a flexible machine

This article analyzes a tool switching problem arising in certain flexible manufacturing environments. A batch of jobs have to be successively processed on a single flexible machine. Each job requires a subset of tools, which have to be placed in the tool magazine of the machine before the job can be processed. The tool magazine has a limited capacity, and, in general, the number of tools needed to produce all the jobs exceeds this capacity. Hence, it is sometimes necessary to change tools between two jobs in a sequence. The problem is then to determine a job sequence and an associated sequence of loadings for the tool magazine, such that the total number of tool switches is minimized. This problem has been previously considered by several authors; it is here revisited, both from a theoretical and from a computational viewpoint. Basic results concerning the computational complexity of the problem are established. Several heuristics are proposed for its solution, and their performance is computationally assessed.     

国外工具磨床发展现状

本文综述了近睥来国外工具磨床技术的发展现状，介绍了由CNC技术带来的几种新的磨削方法，分析了当代工具磨床典型产品的技术水平。     

微机MIS集成构造系统的研究与实践

微机ＭＩＳ集成构造系统是基于软件重用理论，采用应用描述语言，扩展数据字典和标准预制软构件快速构造信息处理系统的一种应用开发工具环境。本文主要介绍其设计思想，基本结构，构造原理，设计原则和实际使用情况。     

Al2O3—TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

研究了Ａｌ２Ｏ３－ＴｉＢ２陶瓷刀具材料在１０００℃下的氧化行为，用ＸＲＤ、ＳＥＭ分析了氧化后的相组成及显微结构。结果表明：Ａｌ２Ｏ３－ＴｉＢ２陶瓷材料在１０００℃空气中氧化增重符合抛物线规律；随ＴｉＢ２含量的增加，该材料的抗氧化能力下降。