Computer simulation of the effect of post annealing parameters on the microstructure inhomogeneity of the non-uniformly deformed copper

A computer simulation on the basis of the Finite Element Method and Monte Carlo Model is developed to simulate the microstructure of the non-uniformly deformed copper workpiece after annealing. Using the computer simulation, the effects of annealing time and temperature on the microstructure inhomogeneity of the workpiece are simulated and investigated quantitatively, by defining an Inhomogeneity Factor, to design an annealing program for reducing the microstructure inhomogeneity. The results show that with increasing the parameters of annealing time and temperature, the inhomogeneity is decreased when one of the parameters is constant. Also, at high annealing temperature, the annealing time changes the inhomogeneity slowly compared with which occurs at low annealing temperature. The simulation results agree well with the experimental values.     

EBIC-guidelines for management of severe head injury in adults. European Brain Injury Consortium

Guidelines for the management of severe head injury in adults as evolved by the European Brain Injury Consortium are presented and discussed. The importance of preventing and treating secondary insults is emphasized and the principles on which treatment is based are reviewed. Guidelines presented are of a pragmatic nature, based on consensus and expert opinion, covering the treatment from accident site to intensive care unit. Specific aspects pertaining to the conduct of clinical trials in head injury are highlighted. The adopted approach is further discussed in relation to other approaches to the development of guidelines, such as evidence based analysis.     

An efficient and regioselective thiocyanation of aromatic and heteroaromatic compounds using cross-linked poly (4-vinylpyridine)-supported thiocyanate as a versatile reagent and potassium peroxydisulfate as a strong oxidizing agent

A green and regioselective thiocyanation of aromatic and heteroaromatic compounds has been achieved via a simple protocol using cross-linked poly (4-vinylpyridine)-supported thiocyanate ion, [P₄-VP]SCN, as a versatile polymeric reagent and potassium persulfate as a strong oxidizing agent, under heterogeneous conditions.

Various indoles, phenol and aniline derivatives, and pyrroles were transformed into their corresponding aryl thiocyanates in high to excellent yields. This procedure offers advantages such as short reaction time, simple reaction work-up, and the polymeric reagents can be regenerated and reused for several times without significant loss of their activity.     

A Novel 2.5–3.1 GHz Wide-Band Low-Noise Amplifier in 0.18 \upmu \hbox {m} CMOS

Aiming for the simultaneous realization of constant gain, accurate input and output impedance matching and minimum noise figure (NF) over a wide frequency range, the circuit topology and detailed design of wide broadband low noise amplifier (LNA) are presented in this paper. A novel 2.5–3.1 GHz wide-band LNA with unique characteristics has been presented. Its design and layout are done by TSMC 0.18  \(\upmu \hbox {m}\) technology. Common gate stage has been used to improve input matching. In order to enhance output matching and reduce the noise as well, a buffer stage is utilized. Mid-stages which tend to improve the gain and reverse isolation are exploited. The proposed LNA achieves a power gain of 15.9 dB, a NF of 3.5 dB with an input return loss less than \(-\) 11.6, output return loss of \(-\) 19.2 to \(-\) 19 and reverse isolation of \(-\) 38 dB. The LNA consumes 54.6 mW under a supply voltage of 2 V while having some acceptable characteristics.     

Synthesis of aluminium nanoparticles by arc evaporation of an aluminium cathode surface

Aluminium nanoparticles (Al Nps) are synthesized using arc discharge method by applying direct current between aluminium electrodes in liquid environment without any use of vacuum equipment, heat exchangers, high temperatures furnaces and inert gases. After synthesis of Al Nps, in situ coating process on the nanoparticles was performed immediately. The effects of media on the yield and morphology of aluminium nanoparticles were investigated. Analysis result of the samples indicated that particle size was less than 30 nm, when 120 A/cm² arc current was used. In addition, coating agent can affect arc velocity, arc stability, morphology and composition of the nanoparticles. Resultant nanoparticles were identified using X-ray powder diffraction (XRD), also their surface morphology was studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and finally the accuracy of coating was assessed with infrared (IR) spectroscopy.     

The Electrochemical Behavior of Au/AuNPs/PNA/ZnSe-QD/ACA Electrode Towards CySH Oxidation

Nano-Micro Letters - This work describes the electrochemical behavior of azodicarboxamide (ACA) film immobilized on the surface of penicillamine (PNA)/ZnSe-quantum dot (ZnSe-QD) gold nanoparticle...     

Hot tensile properties and microstructural evolution of as cast NiTi and NiTiCu shape memory alloys

Hot tensile properties of as cast NiTi and NiTiCu shape memory alloys were investigated by hot tensile test at temperature range of 700–1100 °C using the strain rate of 0.1 s⁻¹. The NiTi alloy exhibited a maximum hot ductility at temperature range of 750–1000 °C, while the NiTiCu alloy showed it at temperature range of 800–1000 °C. It was found that at temperatures less than 750 °C, diffusion-assisted deformation mechanism was inactive leading to semi-brittle type of failure and limited ductility in both alloys. Also it was found that at temperature range of 800–1000 °C, dynamic recrystallization is dominant leading to high ductility. Likewise, the fracture surface of the specimens presenting the maximum hot ductility showed an ideal type of ductile rupture in which they gradually pulled out to a fine point. On the other hand, the decline in ductility occurred at the temperatures above 1000 °C was attributed to the liquid phase formation leading to interdendritic and intergranular type of fracture.     

Optimal Cycle Times in a Two-Stage Serial System With Set-Up and Inventory Costs

Two 2-stage serial production systems under constant average demand rate and infinite horizon are considered. The first and the simpler system assumes zero final product inventory; while the second assumes it nonzero but with a continuous demand. The stages have finite production rates greater than or equal to the demand rate and operate with periodic start-ups and shutdowns. No stock-outs are allowed in the inventories. Analytical results for determining a cyclic schedule with the minimum sum of set-up and inventory costs are presented. The optimal lot sizing policy for the first system involves integer splitting/merging of lots; however noninteger split/merge policy may be optimal in some instances of the second.     

Performance characterization of a non‐linear system as both an adaptive notch filter and a phase‐locked loop

The behaviour of a non‐linear dynamical system is described. The system may be characterized as an adaptive notch filter, or alternatively, as a phase‐locked loop. Either way, the system has the inherent capability of directly providing estimates of the parameters of the extracted sinusoidal component of its input signal, namely its amplitude, phase and frequency. The structure and mathematical properties of the system are presented for two cases of fixed‐frequency and varying‐frequency operation. The effects of parameter setting of the system on its performance are studied in detail using computer simulations. Transient and steady‐state behaviour of the system are studied in the presence of noise. Simplicity of structure, high noise immunity and robustness and the capability of direct estimation of amplitude, phase and frequency are the salient features of the system when envisaged as an adaptive notch filter or a phase‐locked loop. Copyright © 2004 John Wiley & Sons, Ltd.     

Mitogen-activated protein kinase is activated during IgG-mediated phagocytosis, but is not required for target ingestion

This meta-analysis quantitatively summarized the developmental influence and the effects of locomotor experience as well as the benefits of locomotor practice, locomotor assistance, and active searching patterns on children's search performance. Based on specific criteria, a search of a database and reference lists identified 19 studies, including 1,029 children (510 boys and 519 girls) from 4 to 144 months of age. Outcome measures of spatial performance were converted to 83 effect sizes that reflected the effects of specific experimental characteristics. Analyses of variance indicated that with older children, locomotor activities are more important to their spatial searching. Locomotor status, searching patterns, locomotor assistance, test conditions, and test reliability were identified as moderator variables. In addition, locomotor training significantly improved children's spatial search. The results supported the hypothesis that children's development of spatial search skills is influenced by locomotor experience.