牵引逆变器IGBT风冷散热试验及仿真平台搭建

IGBT散热性能是影响高速动车组在行驶过程中安全性、可靠性及动力性的重要因素。本文以某出口铰接车牵引变流器箱为试验研究载体,研制了专用风冷散热试验台;同时运用仿真软件Flotherm进行了仿真计算,通过实物试验与仿真计算的对比研究,验证了仿真计算的可行性。     

Context enabled decision aids to support the situation awareness and performance of risk engineers carrying out loss prevention surveys

Routine inspection by insurance companies at their clients’ facility, also known as loss prevention survey, help identify the best strategies to minimize damages when there is a high-speed wind event. More specifically, wind vulnerabilities associated with a building are evaluated using a process known as windstorm risk inspection. This routine inspection helps clients reduce the extent of damages caused by high-speed wind events including hurricane and tornado. Risk engineers make use of their subjective and analytical deduction skills to successfully carry out the inspection tasks. In this research the researchers investigated the effect of context-based visualization strategies on situation awareness and their understanding of the situation. The study examined how different types of information contribute towards the three levels of situation awareness. Following a between-subjects study design, 65 participants completed the study. Each session lasted 90–120 min. A checklist based and predictive display-based decision aids were tested and found to be effective in supporting the situation awareness requirements as well as performance of risk engineers. However, the predictive display only helped with certain tasks such as understanding the interaction among different components on the rooftop. For remaining tasks such as perceiving obvious issues like membrane tear, clogged drains and vegetation growth, checklist alone was sufficient. This study helped the understanding of the advantages and disadvantages of the decision aids tested. More specifically, these decision aids can improve the mental model of novice risk engineers. Additionally, this study provided insights that could help design training materials for infrastructure inspectors.     

Computational Fluid Dynamics Study on a Top-Blown Smelting Process with Lance Failure in an Isa Furnace

JOM - The Isa/Ausmelt smelting technology with a top submerged lance (TSL) has been extensively used in copper smelting processes. However, the TSL is extremely vulnerable to damage and failure...     

全钢载重子午线轮胎内衬层复合气泡的改善

分析全钢载重子午线轮胎内衬层复合气泡产生原因并提出相应的解决措施。通过增大复合压辊角度、硬度和压力及在气密层复合前增加位移传感器以减小气密层拉伸,使其与过渡层复合后收缩率一致,解决了内衬层复合气泡问题,提高了轮胎质量和企业经济效益。     

镁改性活性炭强化活性污泥处理混合污水研究

基于序批式活性污泥法(SBR)工艺,将镁盐改性活性炭(MgO-PAC)与传统活性炭(PAC)混合而成MPAC材料,用于处理生活与工业混合污水。通过连续30 d的运行实验,探讨了MPAC材料对生活与工业混合污水中COD、NH4^+-N和TP的去除效果以及对污泥的比耗氧速率、沉降性能和微生物多样性的影响。结果表明,投加MPAC材料对污水中COD的去除率提升了12.7百分点,对TP的去除率提升了17.5百分点,对NH4^+-N的去除率超过86.4%。投加MPAC后处理效果更好的重要原因,在于MPAC使得活性污泥的沉降性能和比耗氧速率得到明显改善,也提升了污泥的微生物丰度。MPAC对活性污泥处理生活与工业混合污水具有强化作用。     

基于蛛状网拓扑智能变电站“三层一网”通信系统研究

在110kV及以下电压等级变电站中，“三层一网”架构虽然简化了二次系统接线，但实时性和可靠性难以保证。针对传统拓扑结构下的实时性和可靠性无法同时达到最优效果的问题，本文采用“三层一网”架构下蛛状网拓扑结构，仿真结果表明该结构下的通信系统实时性最佳，解决了传统拓扑结构实时性差的问题，并结合算例验证了其可行性；运用故障树分析法定量分析不同结构的可靠性，结果表明蛛状网结构的可靠性更好。为解决研究复杂的通信系统可靠性时传统故障树方法有一定的局限性的问题，本文引入T-S模糊故障理论，建立T-S故障树模型，计算结果表明蛛状网结构下通信系统可靠性最好。根据本文研究可以得到蛛状网拓扑结构能同时提高通信系统实时性和可靠性的结论。     

Isolation of peanut protein aggregates using aqueous extraction processing combined with membrane separation

A two-stage microfiltration and ultrafiltration (MF/UF) for peanut protein recovery and water recycling from aqueous extraction processing (AEP) were investigated. Peanut protein aggregates and alkaline water were obtained using flat and wound MF/UF and alkaline water recycled in AEP. With this approach, most of the wastewater could be recycled to produce reusable water to solve wastewater problems in aqueous oil extraction processing from oilseeds. The result showed that a little oil and protein were lost (1.21% and 4.35%, respectively) during the recycling of permeate in AEP, which was still acceptable. Peanut protein aggregations (PPAs) were characterised by analysis with Fourier-transform infrared spectroscopy (FTIR), sodium dodecyl sulphate–polyacrylamide gel electrophoresis (SDS-PAGE), high-performance gel filtration chromatography (HPGFC) and binding force analysis. Solubility analysis suggested that PPA had molecular structures with more hydrophobic groups on the surface than in the peanut protein isolate (PPI). In vitro, PPA was digested by both pepsin and trypsin more than PPI. FTIR profiles demonstrated there were more β-sheet and less α-helix in PPA, which means much more aggregation. In addition, binding force analysis showed hydrophobic interaction was the major force that restricted dissolution of PPA and disulfide bonds were of second importance, which provided a possible physical treatment opportunity for improving the solubility of PPA.     

合成工艺对氮化硼纳米管显微结构和性能的影响

采用无定型B粉为原料,在催化剂Fe2O3和CaO辅助作用下,控制反应气氛氨气的流量(150~200 mL/min),在1200℃下于真空管式炉中保温4 h,制备氮化硼纳米管(BNNTs)。采用透射电子显微镜(TEM)、X射线衍射(XRD)和傅里叶转换红外光谱分析(FTIR)等手段对产物的结构和形貌进行了表征,结果表明:所得产物为竹节状氮化硼纳米管(BNNTs),其晶体结构为六方氮化硼,外径约为35~100 nm,长度为数微米至数十微米。     

Grain size effect on microwave dielectric properties of Na2WO4 ceramics prepared by cold sintering process

In this work, cold sintering was adopted to prepare Na₂WO₄ ceramics with different grain sizes ranging from 0.632 μm to 17.825 μm. Their microstructures, complex impedance, and microwave dielectric properties were studied in-depth. It was found that samples with relative densities higher than 92% can be successfully synthesized by cold sintering process at a low temperature of 240 °C. However, their electrical properties have strong dependence on the grain size. Specifically, the resistance of grain boundaries decreases dramatically with the increase of grain sizes, while the quality factor has a positive correlation with the grain sizes of Na₂WO₄ ceramics. Excellent microwave dielectric properties, including permittivity = 5.80, Q × f = 22,000 GHz, and TCF = −70 ppm/°C, are obtained for Na₂WO₄ ceramics with a grain size of 4.477 μm prepared by cold sintering process.