Use of cellular confinement for improved railway performance on soft subgrades

Due to extensive right-of-way, railroads are inevitably subject to poor subgrade conditions and interrupted service for significant maintenance due to excessive deformations and loss of track geometry. Geocell confinement presents itself as a possible solution for improving performance of ballasted railroad embankments over weak subgrade. To investigate the efficacy of geocell confinement on ballasted railway embankments, a set of well-instrumented, large-scale cyclic plate loading tests and numerical simulations were performed on geocell-confined ballast overlaying a weak subgrade material. The agreement of results from tests and simulations served as a basis for simulating practical track geometry and performance for various geocell configurations and subgrades using three-dimensional (3D) finite element (FE) analyses. The study showed that geocell reinforcement significantly decreased track settlement, decreased subgrade deformations with lower and uniform distribution of vertical stresses on subgrade and inhibited lateral deformation and serviceability under cyclic loading. These results demonstrate that geocell confinement can be an effective alternative to subsurface improvement or shorter maintenance cycles, particularly on weak subgrades.     

Structural-microstructural characterization and optical properties of Eu3+,Tb3+-codoped LaPO4·nH2O and LaPO4 nanorods hydrothermally synthesized with microwaves

Rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·nH₂O single-crystal nanorods with the compositions La_0.99999-xEu_xTb_0.00001PO₄·nH₂O (x?=?0–0.03), La_0.99999-yTb_yEu_0.00001PO₄·n′H₂O (y?=?0–0.010), and La_0.99999-zTb_zEu_0.000007PO₄·n′′H₂O (z?=?0–0.012) were hydrothermally synthesized with microwaves. It is shown that the Eu³⁺,Tb³⁺ codoping does not affect the thermal stability of these nanorods, which is due to the formation of substitutional solid solutions with both Eu³⁺ and Tb³⁺ replacing La³⁺ in the crystal lattice. Moreover, it is also shown that monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ single-crystal nanorods can be obtained by calcining their rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·(n,n′ or n′′)H₂O counterparts at moderate temperature in air, and that they are thermally stable. It is also observed that, for the same Eu³⁺,Tb³⁺-codoping content, the monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ nanorods exhibit higher photoluminescent efficiency than the rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄· (n,n′ or n′′)H₂O nanorods. Moreover, it is found that the highest photoluminescence emission corresponds to the monazite-type La_0.96999Eu_0.02Tb_0.00001PO₄ nanorods for the La_0.99999-xEu_xTb_0.00001PO₄ system. However, for those compositions energy transfer from Tb³⁺ to Eu³⁺ does not occur. In addition, for an efficient energy transfer to occur, a content of at least 1?mol% Tb³⁺ is needed in all the studied materials.     

Online monitoring of laser remelting of plasma sprayed coatings to study the effect of cooling rate on residual stress and mechanical properties

This investigation deals with laser remelting of plasma sprayed alumina and chromia coatings. The time-temperature history of the laser remelted zone was recorded using an infrared pyrometer during the remelting operation. Cooling rates, under varying scanning speed, were determined from the time temperature curve. Surface morphology, microstructure, and phases of the laser treated and as-sprayed coatings were characterized using scanning electron microscopy, optical microscopy, X-ray diffraction, respectively. X-ray diffraction was also employed to measure the surface residual stress of the coatings. Inherent features of plasma sprayed coatings like porosity and inter-lamellar boundary were obliterated upon laser remelting. A columnar grain growth perpendicular to the laser scanning direction was observed. The range of roughness of the as-sprayed coatings reduced from 6 to 8?µm to 1–2?µm in the remelted layers. For both coatings, more than 90% reduction in porosity was found upon laser remelting. Surface residual stress of the as-sprayed alumina and chromia coatings was found to be tensile and compressive, respectively. Within the limits of the testing condition the tensile residual stress of the remelted layers increased by up to around 500% in the alumina coatings. In the chromia coating a decrease of compressive stress by up to around 80% was recorded. In the remelted layer the tensile nature of the stress showed a tendency to increase with an increase in the cooling rate. However, the state of stress of the as-sprayed layer, i.e., tensile or compressive, was retained in the remelted layer. The residual stress was found to decrease in the remelted layer with an increase in the degree of overlap of the remelted tracks.     

On the existence and origin of sluggish diffusion in chemically disordered concentrated alloys

Concentrated single phase solid solutions, including medium- and high-entropy alloys, represent a new class of materials that have recently attracted significant interest due to exceptional functional and structural properties. Their fascinating properties are mainly attributed to the sluggish atomic-level diffusion and transport, but its controlling mechanisms are largely unknown and there is certain skepticism about its very existence. By using microsecond-scale molecular dynamics, on-the-fly and conventional kinetic Monte Carlo, we reveal the governing role of percolation effects and composition dependence of the vacancy migration energy in diffusion. Surprisingly, an increase of concentration of faster species (Fe) in face-centered cubic Ni-Fe alloy may decrease the overall atomic diffusion. Consequently, the composition dependence of tracer diffusion coefficient has a minimum near the site percolation threshold, ～20?at.%Fe. We argue that this coupled percolation and composition-dependent barriers for vacancy jumps within different subsystems in medium- and high-entropy alloys leads, indeed, to the sluggish diffusion. A fast method for preselecting materials with potentially desired properties is suggested.     

Influence of LiBO2 addition on the microstructure and lithium-ion conductivity of Li1+xAlxTi2−x(PO4)3(x = 0.3) ceramic electrolyte

Concerning the safety problems of conventional Li-ion batteries with liquid electrolytes, it is crucial to develop reliable solid-state electrolytes with high ionic conductivity. Li_1+xAl_xTi_2?x(PO₄)₃ (LATP, x = 0.3) is regarded as one of the most promising solid electrolytes due to its high ionic conductivity and excellent chemical stability to humidity.Herein, a new strategy is proposed for improving the sintering behavior and enhancing the ionic conductivity of LATP by using LiBO₂ as the sintering aid via liquid phase sintering. The as-prepared sample LATP with homogeneous microstructure and high relative density of 97.1% was successfully synthesized, yielding high total ionic conductivity of 3.5 × 10^?4 S cm^?1 and low activation energy of 0.39 eV at room temperature. It was found that the addition of LiBO₂ could effectively enhance the densification and increase the ionic conductivity of LATP electrolyte, proving an effective way to synthesis LATP ceramics by a simple and reliable route.     

Molecular Epidemiology of Enteroaggregative Escherichia coli (EAEC) Isolates of Hospitalized Children from Bolivia Reveal High Heterogeneity and Multidrug-Resistance

Enteroaggregative Escherichia coli (EAEC) is an emerging pathogen frequently associated with acute diarrhea in children and travelers to endemic regions. EAEC was found the most prevalent bacterial diarrheal pathogen from hospitalized Bolivian children less than five years of age with acute diarrhea from 2007 to 2010. Here, we further characterized the epidemiology of EAEC infection, virulence genes, and antimicrobial susceptibility of EAEC isolated from 414 diarrheal and 74 non-diarrheal cases. EAEC isolates were collected and subjected to a PCR-based virulence gene screening of seven virulence genes and a phenotypic resistance test to nine different antimicrobials. Our results showed that atypical EAEC (a-EAEC, AggR-negative) was significantly associated with diarrhea (OR, 1.62, 95% CI, 1.25 to 2.09, p < 0.001) in contrast to typical EAEC (t-EAEC, AggR-positive). EAEC infection was most prevalent among children between 7–12 months of age. The number of cases exhibited a biannual cycle with a major peak during the transition from warm to cold (April–June). Both typical and a-EAEC infections were graded as equally severe; however, t-EAEC harbored more virulence genes. aap, irp2 and pic were the most prevalent genes. Surprisingly, we detected 60% and 52.6% of multidrug resistance (MDR) EAEC among diarrheal and non-diarrheal cases. Resistance to ampicillin, sulfonamides, and tetracyclines was most common, being the corresponding antibiotics, the ones that are frequently used in Bolivia. Our work is the first study that provides comprehensive information on the high heterogenicity of virulence genes in t-EAEC and a- EAEC and the large prevalence of MDR EAEC in Bolivia.     

Crystal structure,polarization properties and reverse nonlinearity of solid solutions of the KNN-PZT system in a wide range of external influences

Experimental research of the crystal structure, polarization properties, and reverse nonlinearity of ceramic solid solutions of the (1-x) (Na_0·5K_0.5)NbO₃-xPb(Ti_0·5Zr_0.5)O₃ (KNN-PZT) quasi-binary system with 0.0 = x ≤ 1.0 in a wide range of external influences (temperatures, strength of dc/ac fields) has been done. Based on the X-ray structural data, an x-T diagram of the system has been constructed, and correlations of the behavior of the macroproperties of solid solutions with the features of their phase states with the temperature change have been established. It has been concluded that it is advisable to use the proposed compositions when designing microelectronic devices operating in various extreme conditions.