排序方式: 共有126条查询结果,搜索用时 15 毫秒
71.
72.
73.
研究了高密度聚乙烯(HDPE)/线性低密度聚乙烯(LLDPE)共混物及其碳酸钙(CaCO3)填充体系的注射成型收缩率,分别用示差扫描量热仪(DSC)和AR2000高级流变仪分析测定了共混物的结晶度和熔体黏度,并探讨了不同配比下共混物结晶度和熔体黏度与成型收缩率的关系。结果表明,在加工条件不变的情况下,HDPE/LLDPE共混物成型收缩率受结晶度和熔体黏度的显著影响。随LLDPE用量的增加,收缩率的变化明显分为三个阶段,先迅速增大,然后变化减缓,最后又逐渐减小。加入少量铝酸酯活化的CaCO3可以显著降低共混物的成型收缩率。 相似文献
75.
76.
A series of thermoreversible konjac glucomannan gels crosslinked by organic borate were prepared. Required amount of hydrophilic
SiO2 was added into the konjac glucomannan solutions before the crosslinking reaction. The gel network was formed through the
crosslinking reaction between borate ions dissociated from organic borate and the cis-diol hydroxyl groups on the mannose
units of polysaccharide chains. The rheological properties of the complex gels were studied by dynamic viscoelastic measurement.
The gelation kinetics of the complex gels was studied and the critical gelation points of the gels were exactly determined
by the Winter-Chambon criterion. The effects of temperature and composite ratio on the shear storage modulus (G′), the loss modulus (G″) and the sol-gel transition points were investigated.
Funded by Chinese Natural Science Foundation Committee(No.50673080) 相似文献
77.
78.
有机硅-丙烯酸甲酯的乳液聚合研究 总被引:2,自引:0,他引:2
用丙烯酰端基的环氧乙烷-环氧丙烷共聚物作为共聚单体及反应性乳化剂,研究了甲基丙烯酰丙基硅氧烷和丙烯酸甲酯的乳液共聚合。探讨了反应性乳化剂用量与单体转化率、反应时间和乳胶粒径的关系,研制了有机硅单体质量分数为40%的稳定乳液。此外,用1H-NMR研究了滴加乳化单体液滴和一次加料两种方法下,共聚物组成与单体转化率的关系。结果表明,加料方式对共聚物组成有较大影响,水溶性大的单体优先聚合。 相似文献
79.
以含有共聚基团的有机硅化合物改性纳米 Si O2 ,通过与丙烯酸酯单体共聚 ,合成了一系列纳米 Si O2 /有机硅氧烷 /聚丙烯酸酯复合乳液 ,其硅质量分数可以在 5 %~ 70 %之间连续变化 ,研究了反应时间、单体配比、合成工艺和加料方式等多种因素对反应进程和乳液性能的影响 相似文献
80.
纳米SiO2/有机硅/聚丙烯酸酯复合乳液的合成 总被引:9,自引:1,他引:8
以含有共聚基团的有机硅化合物改性纳米SiO2, 通过与丙烯酸酯单体共聚,合成了一系列纳米SiO2/有机硅酸烷/聚丙烯酸酯复合乳液,其硅质量分数可以在5%-70%之间连续变化,研究了反应时间、单体配比、合成工艺和加料方式等多种因素对反应进程和乳液性能的影响。 相似文献