Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

In a passive ultra-high frequency (UHF) radio frequency identification (RFID) system, the recovery of collided tag signals on a physical layer can enhance identification efficiency. However, frequency drift is very common in UHF RFID systems, and will have an influence on the recovery on the physical layer. To address the problem of recovery with the frequency drift, this paper adopts a radial basis function (RBF) network to separate the collision signals, and decode the signals via FM0 to recovery collided RFID tags. Numerical results show that the method in this paper has better performance of symbol error rate (SER) and separation efficiency compared to conventional methods when frequency drift occurs.      

Generalized phase compensator of continuous time plants

This work proposes a novel design method for generalized order lead/lag compensators. With respect to the traditional lead/lag compensator, it introduces a new parameter, β, which is a non-integer number. A new design method of the compensator is introduced in order to quantify its design parameters. Compared to its integer order counterpart, the generalized order lead compensator facilitates with the unique solution of desired design specifications with maximum phase at the desired gain cross-over frequency to achieve reshaping of the loop frequency domain characteristics. On the other hand, generalized order lag compensator is designed so as to allow minimum phase lag at the new gain crossover frequency. Examples with simulation and real-time results are presented to validate the efficacy of the proposed approach.     

Effect of working position and cold environment on muscle activation level and fatigue in the upper limb during manual work tasks

Several occupational groups are exposed to periods of low ambient temperatures while performing manual work tasks outdoors. Work tasks typically include heavy lifting, tool handling, and overhead work. This study evaluated the effect of working position and cold environment on muscle activation level (%RMS_max) and fatigue in the upper limb during manual work tasks. Fourteen male participants (25 ± 3 years, 80.9 ± 6.4 kg, 182 ± 5 cm) completed a 2-h test protocol consisting of five test periods alternating with four work periods, wearing identical sets of clothing, under cold (−15 °C) and control (5 °C) conditions. The work periods consisted of manual work at the hip level, manual overhead work, and a lifting exercise. The test periods consisted of isometric maximal voluntary contractions (MVC) and seated rest. Skin temperatures decreased during cold exposure, especially in the extremities. %RMS_max in the forearm was higher in the cold condition both during overhead work and work at the hip level than that for the same work in the control condition, especially at the end of the test when the difference was approximately 25% (equating to 2–3 %RMS_max). For the middle deltoid muscle, the %RMS_max was approximately three times (or 10 %RMS_max) higher during overhead work than work at the hip level, but there was no additional cost of working in the cold. Signs of deltoid muscle fatigue (decrease in electromyography median power frequency and an increase in %RMS_max) were observed during the overhead work periods in both temperature conditions. No decrease in MVC, as a sign of overall muscle fatigue, was observed in either condition.Relevance to industryThis study demonstrated that when wearing suitable cold-weather protective clothing, the adverse effect of work posture is much higher than that of cold on muscle demand and physical strain.     

基于差频检测技术的高速AD单粒子翻转评估方法研究

本文基于差频检测的原理，提出一种在高频动态输入模式下，对高速高精度模数转换器（AD）的抗单粒子翻转效应进行评估的测试方法，并以一款8位3 GSPS高速AD为测试对象，设计开发了一套高速AD单粒子翻转效应测试系统，对目标器件进行了重离子试验。通过对试验结果的图像和错误数据进行分析，评估参试器件的抗辐照性能参数，为抗辐照高速高精度AD的加固设计提供数据支撑。     

Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

基于卓越工程师教育的频率特性分析课堂教学研究

频率特性分析在工程应用中具有重要的作用,在电路分析、模拟电子技术、信号与系统、自动控制理论等相关课程中都涉及到相关章节内容,在不同课程中如何根据工程应用和学生学习阶段把握具体的讲解内容和讲解方式非常重要。本文从频率特性的求解方法和具体物理意义角度开展在不同课程中讲解的方法,从时域和频域角度分别讨论其物理意义和具体的分析方法。通过渐进深化的教学过程和教学方法不断提高学生的知识掌握和应用技能,提高学生的工程意识、工程素质和工程创新能力,强化学生对于频率特性课程知识的综合应用能力。     

基于 GA-SVM 算法的通信网络入侵信号自动识别技术

针对当前通信系统入侵行为自动识别技术存在入侵信号样本识别成功率较低、误识别率和漏识别率较高的问题,提出基于 GA-SVM 算法的通信网络入侵信号自动识别技术。利用混沌原理提取通信网络入侵的非平稳信号时域特征,并凭借自回归模型提取对应频域特征,捕捉邻域入侵信号间的非线性时空动作频率,评价相邻行为间的状态关联性,预测入侵信号后续行为,完成入侵信号的识别。实验表明,所提方法识别精度高、误识别率较低,漏识别率非常低,具有可应用于实际的理论价值。     

基于智能控制的煤层气抽采监测系统的应用研究

提出了一种基于智能控制的煤层气抽采监测系统。该系统以可编程逻辑控制器为控制中心,通过监测传感器实现对煤层气抽采时的井底流压力、温度等的连续性监测,实现对抽采设备运行转速的调整。实际表明该控制系统能将井底流压力变化范围控制在0.4%范围内,有效提升了煤层气采集的控制精度和采集速度。     

胡萝卜丁中维生素C在热风辅助射频干燥过程中降解的动力学模型

目的研究热风辅助射频(hot air-assisted radio frequency,HA-RF)干燥过程中维生素C随温度变化的降解动力学模型。方法在6.5 cm极板间距和60℃热风系统条件下进行HA-RF干燥,重点研究胡萝卜丁中维生素C在干燥过程中的降解动力学,包括脱氢抗坏血酸(dehydroascorbic acid,DHAA)和抗坏血酸(ascorbic acid,AA)。总维生素C含量采用2,4-硝基苯肼分光光度法测定,AA采用2,6-二氯吲哚酚滴定法测定。结果HA-RF干燥过程中维生素C的降解规律符合一级可逆模型,其降解活化能为40.54 kJ/mol。DHAA活化能为35.83 kJ/mol,表明DHAA的稳定性低于AA。结论本研究使用的干燥温度为62.5~77.5℃,较高的干燥温度下维生素C降解速率较高,较低处理温度下的降解过程具有更好的模型适应度(R2>0.98)。     

刚性索动力学系统的约化与索力测量

为解决索力动测中弯曲刚度的耦合影响问题，研究刚性索动力学系统的约化及相应的索力算法。对系统时间和空间进行坐标缩放，建立新时空坐标体系，使原方程约化为最简形式——所有系数均为1或-1，得到频率比互等关系；求解新坐标下的动力学方程，导出固支条件下的频率方程，分析其频率-梁长和频率比-梁长函数特性，提出基于频率比互等关系的双频式索力算法。给出两组10个算例均与现有文献吻合良好。研究表明：系统频率在新坐标下仅由单一参数决定；双频式算法可将索力测量的双参数反问题转化为单参数反问题，实现对索力和弯曲刚度的解耦；与其他方法相比，该方法有两个特点：①两个无量纲参数均具有明确的意义，便于工程人员掌握；②参数区间不受限，不需要对参数区间进行预判或近似处理。