Reduction of NO2 stored in a commercial lean NO x trap at low temperatures

Isothermal storage of NO₂ and subsequent reduction with different reducing agents (H₂, CO or H₂ + CO) in a lean NO _x trap catalyst was tested by Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) experiments at temperatures representative of automotive “cold-start” conditions (<200 °C) using a commercial NO _x trap catalyst. Results from the TPR experiments revealed that no reduction of stored NO₂ to N₂ was observed at 100–180 °C, and at 200 °C 10% reduction only of NO₂ to N₂ was measured. A special affinity of H₂ to form NH₃ was observed during the reduction of stored NO₂. The formation of NH₃ increases with increasing amount of stored NO₂ and decreases with increasing storage temperature. Direct relation exists between the amount of adsorbed and/or stored NO₂ and the formation of H₂O and NH₃.     

玉米黄粉酶解液在黄原胶发酵生产应用的研究

以玉米黄粉酶解液为氮源应用于黄原胶发酵培养基，探讨了蛋白酶种类、玉米黄粉酶解液添加量和酶添加量等因素对其发酵黄原胶粘度和产胶率的影响，并优化了复配氮源的种类及其复配比例。结果表明，碱性蛋白酶水解液作为氮源发酵黄原胶的粘度和产胶率优于其它蛋白酶解液；当酶解液添加量为6%、碱性蛋白酶添加量为8kU时，发酵黄原胶的粘度和产胶率可以达到4235cp和24.4g/L。大豆蛋白与玉米黄粉酶解液复配效果优于与棉籽粉、豆粕粉、花生粉的复配；玉米黄粉酶解液与大豆蛋白复配比为3:7时，发酵黄原胶的粘度和产胶率可以达到5833cp和32.4g/L，与单独以大豆蛋白为氮源无明显差异。本研究为提高玉米黄粉资源利用率、降低黄原胶的发酵生产成本提供了新思路。     

玉米浆为有机氮源的L-乳酸发酵的研究

利用细菌厌氧发酵生产L-乳酸,以降低L-乳酸生产成本为主要目的,实验以玉米浆为有机氮源,以硫酸铵为主要无机氮源,研究了不同接种量对发酵过程的影响;并就以玉米浆替代酵母粉、豆粕水解液、生物素为有机氮源的L-乳酸发酵进行了对比研究实验,实验证明了玉米浆做为有机氮源用于L-乳酸发酵的可行性。在保证生产能力的同时,使用玉米浆为有机氮源对进一步降低L-乳酸生产成本,减少玉米浆对环境的污染进行了探索。     

高产小麦磷钾效应和适宜氮磷钾配比研究

黄泛冲积石灰性土壤在适宜施氮水平下磷钾不同用量及配比对小麦生长的影响表现为:(1)磷肥以中量施用水平(每公顷施用P2O5120kg)增产效果最好,分别比未施磷、低量施用水平(每公顷用P2O548kg)增产30.82%、20.27%,高量施用水平(每公顷施用P2O5192kg),虽然比中量施用水平表现出增产,但增产幅度很小,只有2.85%;(2)钾肥对小麦的增产效应小于磷肥,只有在施用磷肥的基础上配施钾肥,才能使钾的效应得到充分发挥;(3)小麦全生育期氮磷钾施用比例1∶0.5∶0.5为最佳,每公顷施用N240kg、P2O5120kg、K2O120kg效益最高。     

Al2O3-SiC-C质主铁沟浇注料的结合相研究

对高炉主出铁沟用Al2O3-SiC-C质浇注料的结合相变化进行了分析，其中涉及到溶胶结合、氮化硅铁为添加物形成的sialon结合、水泥形成的水硬性结合。溶胶结合强度主要来自于化学结合；而sialon结合、水泥结合的强度仍然来自少量水泥形成的水硬性凝固相的作用，因此对烘烤工艺、使用效果的影响不同。     

利用空气氧化NO的技术探讨

本文针对工业废气中NOx治理技术,对氧化NO的方法进行了论述,比较了各种方法的主要技术特征,着重分析了用空气作为氧化剂的可行性,得出了用空气氧化NO有较好的经济性、应用前景广阔的结论。     

碳沉积法制富氮用炭分子筛的研究

本文提出的碳沉积法是用煤焦油馏分油的有机溶液浸渍煤炭化物,然后热解以进行“孔调变”。确定了最佳工艺条件,制得富氮性能良好的炭分子筛。并用D-A方程求取了各种样品的微孔结构参数。     

煤中吡啶型氮热解机理的量子化学研究

用密度泛函 ( DFT)方法 ,在 UB3LYP/6- 31 G( d)水平上研究了煤中吡啶型氮的热解机理 ,对热解过程中由于官能团周围环境的不同而形成的三类吡啶自由基进行了量子化学计算 ,通过对键的 Mulliken布居数等计算结果的分析 ,分别得到了这三类自由基的热解途径 .并优化得到了反应物、中间体和产物的几何构型 .计算结果表明 ,吡啶型氮主要是以 HCN的形式释放出来的 .NH3 是 HCN二次反应的产物 .     

Microstructural Evolution in Liquid-Phase-Sintered SiC: Part III, Effect of Nitrogen-Gas Sintering Atmosphere

Effects of N₂ sintering atmosphere and the starting SiC powder on the microstructural evolution of liquid-phase-sintered (LPS) SiC were studied. It was found that, for the β-SiC starting powder case, there was complete suppression of the β→α phase transformation, which otherwise goes to completion in Ar atmosphere. It was also found that the microstructures were equiaxed and that the coarsening was severely retarded, which was in contrast with the Ar-atmosphere case. Chemical analyses of the specimens sintered in N₂ atmosphere revealed the presence of significant amounts of nitrogen, which was believed to reside mostly in the intergranular phase. It was argued that the presence of nitrogen in the LPS SiC helped stabilize the β-SiC phase, thereby preventing the β→α phase transformation and the attendant formation of elongated grains. To investigate the coarsening retardation, internal friction measurements were performed on LPS SiC specimens sintered in either Ar or N₂ atmosphere. For specimens sintered in N₂ atmosphere, a remarkable shift of the grain-boundary sliding relaxation peak toward higher temperatures and very high activation energy values were observed, possibly due to the incorporation of nitrogen into the structure of the intergranular liquid phase. The highly refractory and viscous nature of the intergranular phase was deemed responsible for retarding the solution–reprecipitation coarsening in these materials. Parallel experiments with specimens sintered using α-SiC starting powders further reinforce these arguments. Thus, processing of LPS SiC in N₂ atmosphere open the possibility of tailoring their microstructures for room-temperature mechanical properties and for making high-temperature materials that are highly resistant to coarsening and creep.