Towards the Hydrogen Economy in Paraguay: Green hydrogen production potential and end-uses

This study was conducted to estimate the potential for green H₂ in Paraguay. A total production potential of 22.5 × 10⁶ tons/year was obtained with a main contribution (93.34%) from solar photovoltaic. The greatest potential for producing H₂ from solar and wind resources is in the Western region, and from hydro resources is in the Eastern region of the country. Two end-uses of green H₂ were assessed: (1) automotive transportation, replacing gasoline and diesel; and (2) residential energy, replacing firewood and LPG for cooking in households across the country. In 16 of the 17 departments, green H₂ is able to replace the overall consumption of gasoline and diesel, as well as firewood and LPG. Finally, energy service cost (mobility), environmental aspects and CO₂ emissions were considered for three urban mobility technologies for the Metropolitan Area of Asunción. Results show that the mobility cost of fuel cell hybrid electric buses is still very high in comparison to diesel buses and battery electric buses. However, when a longer driving range is required, fuel cell hybrid electric buses could become a viable alternative in the long term. From an environmental point of view, green H₂ used in fuel cell hybrid electric buses has the potential to save about 96% of CO₂ emissions in comparison to diesel buses. It is concluded that the estimated green H₂ production potential favors the incorporation of the Hydrogen Economy in Paraguay.     

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Porous bony scaffolds are utilized to manage the growth and migration of cells from adjacent tissues to a defective position. In the current investigation, the effect of titanium oxide (TiO₂) nanoparticles on mechanical and physical properties of porous bony implants made of polymeric polycaprolactone (PCL) is studied. The bio-nanocomposite scaffolds are prepared with composition of nanocrystalline hydroxyapatite (HA) and TiO₂ powder using the freeze-drying technique for different weight fractions of TiO₂ (0 wt%, 5 wt%, 10 wt%, and 15 wt%). In order to identify the microstructure and morphology of the fabricated porous bio-nanocomposites, the X-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM) are employed. Also, the biocompatibility and biodegradability of the manufactured scaffolds are examined by placing them in a simulated body fluid (SBF) for 21 days, their weight and pH changes are measured. The rate of degradation of the PCL-HA scaffold can be controlled by varying the percentage of its constituent components. Due to an increasing growth and activity of bone cells and the apatite formation on the free surface of the fabricated bio-nanocomposite implants as well as their reasonable mechanical properties, they have the potential to be used as a bone substitute. Additionally, with the aid of the experimentally extracted mechanical properties of the scaffolds, the vibrational characteristics of a beam-type implant made of the proposed porous bio-nanocomposites are explored. The results obtained from SEM image indicate that the scaffolds produced by the employed method have high total porosity (70%–85%) and effective porosity. The pore size is obtained between 60 and 200 μm, which is desirable for the growth and propagation of bone cells. Also, it is revealed that the addition of TiO₂ nanoparticles leads to reduce the rate of dissolution of the fabricated bio-nanocomposite scaffolds.     

石墨烯热电器件栅控特性研究

为了获得一种稳定可控的能源，提出一种栅控石墨烯热电器件。通过对石墨烯通道的载流子输运机理的分析，获得了温度和栅压对通道电阻的影响。依据半经典Mott公式推导了石墨烯塞贝克系数的表达式，同时给出了石墨烯的电导率和热导率模型。最后通过有限元分析(FEA)建模获得不同栅压条件下的器件温度，当栅极电压V_B=0 V时，石墨烯热电器件热端和冷端温度差为30 K；当V_B=6 V时，最大温差达到50 K；当V_B=30 V时，最小温差只有10 K。结果表明，栅压对热电器件的性能有明显的调控性。该研究可为石墨烯热电器件的设计提供理论参考。     

Transverse magnetoresistance peculiarities of thermoelectric Lu-doped Bi2Te3 compound due to strong electrical disorder

The n-type thermoelectric Bi_1.9Lu_0.1Te₃ was prepared by microwave-solvothermal method and spark plasma sintering. The magnetic field and temperature dependences of transverse magnetoresistance measured within temperature 2–200 K interval allow finding the peculiarities characteristic for strongly disordered and inhomogeneous semiconductors. The first peculiarity is due to appearance of linear-in-magnetic field contribution to the total magnetoresistance reflected in a crossover from quadratic magnetoresistance at low magnetic fields to linear magnetoresistance at high magnetic fields. The linear magnetoresistance can result from the Hall resistance picked up from macroscopically distorted current paths due to local variations in stoichiometry of the compound studied. The second peculiarity is that both linear magnetoresistance magnitude and crossover field are functions of carrier mobility which is in agreement with the Parish and Littlewood model developed for disordered and inhomogeneous semiconductors. An increase in the mobility due to a decrease in temperature is accompanied by an increase in the magnetoresistance magnitude and a decrease in the crossover field. Finally, the third peculiarity is related to the remarkable deviation of the total magnetoresistance measured at various temperatures from the Kohler's rule. Presence of strong inhomogeneity and disorder in the Bi_1.9Lu_0.1Te₃ structure concluded from the magnetoresistance peculiarities can be responsible for the remarkable reduction in the total thermal conductivity of this compound.     

High-performance 2,9-DPh-DNTT organic thin-film transistor by weak epitaxy growth method

2,9-DPh-DNTT, an isomeric of diphenyl-dinaphtho[2,3-b:2′,3′-f]-thieno[3,2-b] thiophene (DPh-DNTTs), is an emerging candidate of high mobility organic semiconductor material. In this work, a high performance 2,9-DPh-DNTT organic thin-film transistor (OTFT) is fabricated by the method of weak epitaxy growth. The quality of 2,9-DPh-DNTT thin film was significantly improved when its epitaxial layer grows on an inducing layer of para-sexiphenyl (p-6P). Continuous large-area, highly ordered and terraced 2,9-DPh-DNTT polycrystalline thin films are obtained. The hole mobility of as-fabricated 2,9-DPh-DNTT thin-film transistor reaches up to 6.4 cm² V⁻¹s⁻¹. This simple process of preparing high mobility 2,9-DPh-DNTT thin-film transistor supplies a facile route of large-area OTFT fabrication.     

加工方式对玉筋鱼干风味的影响

为研究加工方式对玉筋鱼干风味的影响，实验按加工方式分为加盐煮制冷风干燥（boiling in salt solution followed by cold air drying，SCC）组和冷风干燥（cold air drying，CD）组。采用电子鼻技术、气相离子迁移谱（gas chromatography-ion mobility spectroscopy，GC-IMS）技术、氨基酸自动分析技术、高效液相色谱技术测定玉筋鱼干中的风味成分。结果表明，不同加工方式制作的玉筋鱼干在气味、滋味方面存在显著差异。电子鼻、GC-IMS技术均能区分不同工艺制作的玉筋鱼干气味，采用GC-IMS技术共分析出68 种挥发性成分，庚醛、戊醛、3-甲基丁醛对玉筋鱼干独特风味的形成有重要影响，其中3-甲基丁醛源自CD工艺，其区别于SCC工艺气味的关键物质。玉筋鱼干中的主要鲜味氨基酸是Glu，主要呈味核苷酸是肌苷酸；CD组玉筋鱼干中的鲜味氨基酸和甜味氨基酸含量占总游离氨基酸的比重高于SCC组，同时CD组滋味活性值、味精当量值均高于SCC组，所以仅采用CD工艺制作的玉筋鱼干滋味优于加盐煮制后CD工艺制作的玉筋鱼干。     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

克氏原螯虾不同可食部位风味成分分析

以克氏原螯虾为研究对象，分别测定克氏原螯虾熟制前后基本营养成分、可食组织得率的变化，运用电子鼻、固相微萃取-气相色谱-质谱联用、气相色谱-离子迁移谱（gas chromatography ion mobility spectrometry，GC-IMS）等技术结合游离氨基酸含量研究克氏原螯虾不同可食部位风味成分的变化。结果表明：克氏原螯虾的重要可食部位是尾肉与肝胰腺，且含有大量蛋白质与脂肪；其中克氏原螯虾肝胰腺熟制前后气味差异远大于尾肉熟制前后气味差异；熟制前后克氏原螯虾尾肉和肝胰腺中共检出59 种挥发性物质，结合GC-IMS分析可知，虾肉熟制后出现新的风味物质，并且一些原有物质（乙酸乙酯、丁酸甲酯和3-辛酮等）含量升高，肝胰腺熟制后挥发性有机物种类（醛类、酮类以及少量醇类和呋喃等物质）减少，含量大部分降低，也有少量物质（乙醇、丙醛、丁醛和戊醛等）含量升高；克氏原螯虾肝胰腺熟制后游离氨基酸总量明显升高，达119.63 mg/g，而尾肉熟制前后游离氨基酸总量相比肝胰腺熟制前后变化较小，但含量很高，达237.51 mg/g。     

Characterization of boron nitride nanosheets synthesized by boron-ammonia reaction

Boron nitride nanosheets (BNNS) with thickness 5–11 nm were successfully produced when pure boron powder (1–2 μm) interacted with ammonia gas in chemical vapour deposition set up. Under the optimized parameters, at 1200 °C and for uninterrupted 1 h of reaction duration, 2D BNNS with thickness of ca.11 nm were synthesized. BNNS were characterized by X-ray diffraction (XRD) for crystal structure, scanning electron microscopy for dimensions and morphology, energy dispersive X-ray analysis for chemical composition and Fourier transform infrared spectroscopy for sp² BN bond detection. The thickness of BNNS determined from both XRD data (using Scherrer equation) and atomic force microscopic analysis confirmed the stated product thickness. The BNNS obtained at 1200 °C had high crystallinity, purity and yield.