高分子材料导热性能影响因素研究进展

介绍了高分子材料导热性能影响因素研究进展，重点阐释了聚合物基体的结构特性（链结构、分子间相互作用、取向、结晶度等）、导热填料（种类、含量、形态、尺寸等）以及制备方法等对高分子材料导热性能的影响。     

2种侧围加强内框总成检具结构对比分析

概述了侧围加强内框总成与周边零件的匹配关系,从检具操作的人机工程出发,描述了侧围加强内框总成检具的2种定位方式和结构设计,对比了2种定位方式对于检测结果的影响,总结了其优点和弊端,结果表明侧围加强内框总成检具采用车内方向朝下的定位方式效果更好。     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

不同细颗粒含量甲烷水合物沉积物三轴剪切试验研究

海域试开采区域含水合物沉积物的粒度分析结果表明水合物沉积物骨架由粗、细颗粒混合构成,通过开展多组低温、高压三轴排水剪切试验研究细颗粒含量和密度对含甲烷水合物沉积物和无水合物沉积物的强度和变形特性的影响。试验结果表明,含水合物沉积物抗剪强度及剪胀性都随细粒含量提高而显著增强。这是由于细颗粒含量增加改变了颗粒间水合物的样貌和分布特征,形成了由水合物包裹着粗颗粒-细颗粒的团簇状集合体。然而,细颗粒含量对无水合物沉积物的强度和变形特性的影响却表现出相反趋势。另外,含水合物沉积物的剪胀关系可以使用修正剑桥模型中的剪胀关系式进行描述。结果表明,剪胀关系的拟合曲线依赖于水合物饱和度的大小。通过对比研究发现,天然水合物和实验室合成水合物试样在较高饱和度时的峰值摩擦角大小及其伴随水合物饱和度的增长趋势存在差异,这种差异主要来源于水合物在沉积物骨架颗粒孔隙中不同的赋存模式及分布特征。     

Enhanced electrocatalytic oxygen reduction reaction from organic-inorganic heterostructure

Herein, molybdenum disulfide nanoflakes decorated copper phthalocyanine microrods (CuPc-MoS₂) are synthesized via two step simple hydrothermal method. The as synthesized hybrid along with pure molybdenum disulfide (MoS₂) nanoflower and pure copper phthalocyanine (CuPc) microrods are well characterized by various techniques that confirm phase, morphology, elemental compositions etc. Next, electrocatalytic oxygen reduction reaction towards fuel cell is investigated in alkaline medium and obtained results proclaim that our CuPc-MoS₂ heterostructure outperforms the other two constituent materials. Efficient oxygen reduction is achieved following four electron pathway by CuPc-MoS₂ whereas partial reduction is done through two electron process by CuPc and MoS₂ separately. Long-time durability test reveals almost 97.6% retention after 8000s that eventually dictate us that CuPc-MoS₂ heterostructure can be the efficient cathode electrocatalyst for future generation fuel cell.     

基于立体定向靶标的探针式多视场三维视觉测量系统

针对含有遮挡区域、深孔及凹槽等特征的多面体或回转体物体，设计了一套基于立体定向靶标的探针式多视场三维视觉测量系统，并阐述该套测量系统的结构组成和基本工作原理。首先，基于近景摄影测量技术建立立体定向靶标的6个单元模型，计算靶标各侧面角点在各自单元模型内的坐标，再通过单元模型的链接和光束平差，获取全部角点的精确全局坐标，并将其作为立体定向靶标的全局控制点。然后，设计了利用共面角点辅助定位的探针，仍基于近景摄影测量技术解算出角点和测头在探针坐标系中的精确坐标。最后，利用共面的棋盘格角点与其像平面之间的单应性矩阵，推导全局坐标系、探针坐标系各自与相机坐标系的位姿关系，进而求得探针测头的全局坐标。以量块（量棒）的标准长度作为评价指标，在2m×1.5m的视场范围内测量精度优于0.1mm。测量实验表明，多视场三维视觉测量系统用于具有回转体结构特征的水壶测量，能够获取水壶表面全部区域的点云数据。     

Competitive growth of Al2O3/YAG/ZrO2 eutectic ceramics during directional solidification: Effect of interfacial energy

The microstructure evolution and growth behavior of the Al₂O₃/Y₃Al₅O₁₂(YAG)/ZrO₂ ternary eutectic ceramics during directional solidification were well investigated. During directional solidification of the Al₂O₃/YAG/ZrO₂ ternary eutectic ceramics, {} Al₂O₃ paralleled with {001}ZrO₂ while they did not parallel with {001}YAG at the same time in the competitive growth stage. All of the interfaces parallel to each other finally. The area percentage of the Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are 40.4 ± 0.2% and 30.8 ± 0.1%, respectively, higher than that of the Al₂O₃/YAG (28.8 ± 0.2%). The content of Al₂O₃ and YAG phases are 39.9% and 41.1%, respectively, almost double of that of ZrO₂. The interfaces of Al₂O₃/ZrO₂ and YAG/ZrO₂ are shorter and more dispersed than that of the Al₂O₃/YAG. It was found that the interfacial energy of Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are lower than that of Al₂O₃/YAG. It can be concluded that interfacial energy plays a decisive role in affecting the crystallographic orientation and interfaces distribution in the Al₂O₃/YAG/ZrO₂ eutectic since the interfaces of Al₂O₃/ZrO₂ and YAG/ZrO₂ with lower interfacial energy can be formed more easily during directional solidification. Therefore, the contents of Al₂O₃/ZrO₂ and YAG/ZrO₂ interfaces are higher. This study can provide theoretical guidance for interface design of multi-phase materials.     

Elastoplastic stress–strain relationship of Si2N2O–Si3N4 ultrafine-grained ceramics based on microhardness test and finite element simulation

A method for obtaining the stress–strain relationship of ceramic materials was proposed on the basis of the relationship between the maximum load and the indentation size obtained by microhardness test. The microhardness testing process of Si₂N₂O–Si₃N₄ ultrafine-grained ceramics was simulated using ABAQUS finite element software. The stress–strain relationship curve of the material was obtained by repeatedly modifying and comparing the experimental and simulation results. The hardness testing principle and elastic–plastic theory were comprehensively applied in this work in accordance with the geometrical characteristics of the Vickers diamond indenter. The theoretical formula for calculating the stress–strain relationship of hard and brittle materials using microhardness experimental data combined with finite element simulation was deduced. The elastic–plastic area division principle for calculating yield stress was proposed. The accuracy of the theoretical formula was verified by comparing the theoretical and simulation results.     

热定形对并列复合再生聚酯短纤维性能的影响

以再生聚酯瓶片料和泡料混合料为原料进行并列复合纺丝,并经后纺工艺处理得到并列复合再生聚酯短纤维。通过对纤维进行干热定形,研究热定形温度、时间对并列复合再生聚酯短纤的强伸性能、卷曲性能和热收缩性能的影响。结果表明:聚酯短纤维的断裂强度和断裂伸长率随着热定形温度升高而增大;断裂强度随热定形时间的延长逐渐下降,断裂伸长率先增大后减小,在20 min时达到最大值,为17.4%,声速取向因子则随着热定形时间的延长呈现下降趋势。纤维的卷曲性能随着热定形温度的升高而改善,较短的时间内,纤维的卷曲性能已经达到最佳;热定形温度的升高使纤维的热收缩率增大;并列复合再生聚酯短纤维的最佳热定形温度是140～160℃,最佳定形时间为10 min。     

Contributions of oxygen vacancies to the hydrogen evolution catalytic activity of tungsten oxides

The tungsten trioxide attracts less attention due to the low electron transfer kinetics that hinders the interaction of electrons and ions during the hydrogen evolution reaction (HER). But the oxygen vacancy strategy can inspire its electrocatalytic activity for HER because it has a positive effect on improving the charge transfer and compensating for the weak hydrogen adsorption of the tungsten trioxide. By synthesizing a series of substoichiometric tungsten oxides, we reveal the linear relationship between the catalytic activity and the content of oxygen vacancies, which indicates that the oxygen vacancy strategy is an achievable route to enhance the HER for metal oxides.