Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

Triggering the aqueous interparticle association of γ‒Al2O3 hierarchical assemblies using divalent cations and cellulose nanofibers

Understanding aqueous dispersion, rheological properties and colloidal stabilisation mechanisms of hierarchically assembled ceramic powders is important for progress in the fields of catalysis, separation and/or adsorption. The present study was designed to evaluate the rheological and sedimentation behaviour of highly loaded aqueous suspensions (up to φ_A = 0.126) containing AlN-powder-hydrolysis-derived, micron-sized, mesoporous, gamma alumina (MA) particulates with a high surface area (～180 m²/g) dispersed with sodium polyacrylate (NaPAA). The as-prepared suspensions were prone to sedimentation and segregation. However, when divalent cations (Mg²⁺, Ca²⁺) or cellulose nanofibers were added, the formation of interparticle association networks in the aqueous suspensions containing MA particles was triggered, facilitating their long-term resistance to sedimentation lasting more than 12 weeks.     

高效液相色谱-电感耦合等离子体质谱法测定鱼肉中甲基汞、乙基汞含量的不确定度评定

目的 评定采用高效液相色谱-电感耦合等离子体质谱(High performance liquid chromatography combined with inductively coupled plasma-mass spectrometry, HPLC-ICP-MS)法检测鱼肉中甲基汞、乙基汞含量的不确定度。方法 分析整个检测过程中存在的不确定度因素，建立数学模型，分别从称样量、稀释体积、标准溶液、标准曲线拟合以及方法回收率等几个方面进行分析，对测量结果的不确定度进行评定。结果 影响测量结果的不确定度主要来源于样品前处理和标准曲线拟合。鱼肉样品中结果表示分别为：甲基汞含量（0.48±0.046） mg/kg；乙基汞含量为（0.34±0.051） mg/kg, k=2。结论 该方法准确度高，适用于鱼肉中甲基汞、乙基汞的检测，为提高数据准确性提供有效指导。     

Lignin solvated in zwitterionic Good's buffers displays antibacterial synergy against Staphylococcus aureus

The volume of industrial lignin is expected to increase with the deployment of biorefineries that convert lignocellulosic biomass to renewable chemicals and fuels. Interest in using lignin for value-added biomedical applications requires understanding of its effects on mammalian and microbial cells, which has been impaired by the toxicity of the solvents used to solubilize lignin. In this study, lignin is solvated in zwitterionic Good's buffers compatible with culture media. Up to 100 mg lignin can be solvated in 1 ml of 3-morpholinopropane-1-sulfonic acid (MOPS, pH 7.2) within 60 min at room temperature, whereby MOPS acts as a chaotropic agent. The addition of MOPS-solvated lignin to cultures of Staphylococcus aureus UAMS-1 containing a subinhibitory concentration of tunicamycin reduced growth more than 99% compared to tunicamycin alone, making lignin of interest as an antibiotic adjuvant. This effect of lignin is attributed to damage to the bacterial cell membrane.     

Properties of starch–cellulose fiber films produced by tape casting coupled with infrared radiation

Tape casting is a suitable process for large-scale production of biodegradable films. This study presents a comparison of three drying procedures of starch–cellulose films: i) conduction drying, ii) infrared drying (42.3?W?m^?2, higher infrared heating power damaged the films), and iii) conduction-infrared drying. All the drying procedures were performed at approximately 60°C. Drying times from the second and third methods were close to 1?h, half the time observed for conduction drying. Films from the second and third methods showed similar hygroscopicity (0.15?g.?g^?1, RH 43%), tensile strength (31.3?MPa, RH 58%), and glass transition temperature (?12.13°C, RH 43%).     

Coproduction of Ethyl Acetate and n‐Butyl Acetate by Using a Reactive Dividing‐Wall Column

The performance of the reactive distillation dividing‐wall column for coproduction of ethyl acetate and butyl acetate was experimentally studied. n‐Butanol and ethanol are raw reaction materials that react with acetic acid in the reaction zone to produce n‐butyl acetate and ethyl acetate, respectively. n‐Butyl acetate is not only a product, but also acts to remove water generated by the esterification reactions. The effects of various parameters, such as catalyst loading per stage, reflux ratio, liquid split and molar feed ratios, ethyl acetate/n‐butyl acetate purity, pressure drop, and total energy consumption, are investigated. Results show that ethanol could be completely converted and the products could be easily separated, which shows great industrial application potential in the coproduction of ethyl acetate and n‐butyl acetate.     

Synthesis of Cellulose-Based Macromolecular Coupling Agent and its Utilization in Poly (butylene succinate)/Wood Flour Composites

A long fatty side chain was introduced into the macromolecule of hydroxyethyl cellulose (HEC) via esterification reaction. The hydrophobicity of hydroxyethyl cellulose lauric acid ester (HECLAE) was enhanced in comparison with HEC. The obtained HECLAE was used as macromolecular coupling agent in poly (butylene succinate)/wood flour composites and exhibited a positive influence on improving the mechanical performance of composites. Besides, HECLAE plays a role as a hydrophobic agent in composites. A significant increase in storage modulus (E’) was observed upon the incorporation of treated wood flour. SEM images showed that the dispersion of treated wood flour in PBS matrix was improved.     

Cross-linking of cellulose and poly(ethylene glycol) with citric acid

A novel approach to modifying native cellulosic fibres with poly(ethylene glycol) (PEG) impregnation and simultaneous cross-linking by citric acid (CA) was investigated. To understand the contributions of different components in the system, control references with just CA and cellulosic fibres (filter paper) were studied. The effect of sodium hypophosphite as a catalyst was also assessed. The results revealed that ester bonds are indeed formed in the cellulose–PEG–CA reaction system, as indicated by weight percentage gain (WPG) and FTIR analysis. The best results were achieved by using 5% CA and 10% PEG (calculated as weight-% from cellulose). In the reaction, the environmentally friendly CA prevents PEG from being leached out of cellulose during washing, resulting in promising future applications in dimensionally stabilized products based on cellulosic fibres.     

助剂对聚醋酸乙烯酯乳液涂料对比率的影响

研究分析了聚醋酸乙烯酯(PVAc)乳液涂料中,各功能助剂(纤维素、丙二醇、聚丙烯酸钠盐、十二碳醇酯)对涂料对比率的影响。通过对实验数据的分析比较,得到结论:增稠剂纤维素用量增加对涂料对比率无明显影响;分散剂聚丙烯酸钠盐用量增加到6g时涂料对比率最高;聚结剂十二碳醇酯用量增加使对比率呈上升趋势;成膜助剂丙二醇质量的增加使涂料对比率呈无规律变化。     

Silica-supported carboxylated cellulose nanofibers for effective lysozyme adsorption: Effect of macropore size

Engineering hierarchical macro/mesoporous structures that offer an abundance of accessible binding sites are highly desirable in protein adsorption processes. However, numerous significant challenges remain. Herein, cellulose nanofiber (CNF)-loaded macroporous silica (CNF-MPS) particles were successfully synthesized with a high degree of accessible binding sites by tuning the macropore size of the silica particles and loading a highly carboxylated CNF via smart and rational design. The as-prepared CNF-MPS particles exhibited a high negative charge (~−59 mV) and excellent protein adsorption ability (>1000 mg/g) in <5 min. Furthermore, tuning the macropore size influenced the CNF deposition either to the external surface or penetrating within the pores. As a result, the optimum macropore successfully enhances the adsorption capability to >1500 mg/g as a result of improved interconnectivity between the channels. Here exposed macropores of >100 nm allows ingress of protein to the interior structure that houses an abundance of binding sites comprising the dispersed CNF. Additionally, the adsorption kinetics, thermodynamics, and isothermal parameters were studied to analyze the mechanism of lysozyme adsorption. The adsorption process is confirmed to occur spontaneously at any temperature with a pseudo-second-order model describing the kinetic model, and CNF deposition affecting the heterogeneity of the binding sites.