Effect of heat loss on the syngas production by fuel-rich combustion in a divergent two-layer burner

The effect of heat loss on the syngas production from partial combustion of fuel-rich in a divergent two-layer burner is numerically studied using two-dimensional model with detailed kinetics GRI-Mech 1.2. Both the radiation and wall heat losses to the surrounding are considered in the computations. It is shown that two types heat losses have different effects on the syngas production. The radiation heat loss has significant effect on the syngas temperature and the syngas temperature is dropped as radiation heat loss is increased, but it has neglected effect on the reforming efficiency and methane conversion efficiency. The wall heat loss has a comprehensive effect on the syngas production. The wall heat loss not only reduces the conversion efficiency, but also significantly decreases the syngas temperature. The effect of wall heat loss becomes weak as the equivalence is increased. The reforming efficiency drops from 0.440 to 0.424 for equivalence ratio of 2 and mixture velocity of 0.17 m/s for the predictions between adiabatic wall and non-adiabatic conditions.     

建筑物掏土纠倾法单孔与多孔塑性区特性研究及工程应用

在建筑物水平掏土纠倾工程中，掏土孔间距是影响纠倾工程安全与工期的重要因素。为了快速准确地确定纠倾工程中的水平掏土孔间距，研究了单个掏土孔和多个掏土孔情况下孔周边土体塑性区发展特性。利用土体塑性力学分析计算得到了单孔下的孔周土塑性区半径，而后通过有限元模拟得到孔周土体塑性区半径的数值解，将孔周塑性区半径解析解与数值解进行了对比。并通过有限元数值模型研究了多个掏土孔相互影响情况下的塑性区发展规律，以孔间土体塑性区贯通时的距离作为掏土孔间距。考虑土体参数随机特性的影响，研究不同上部荷载作用下掏土孔间距的取值变化规律，上部面荷载与地基承载力特征值比值用p表示，孔间距与掏土孔直径比值用n表示。研究发现：多孔塑性区半径（孔间塑性区贯通时）是单孔塑性区半径的1.3倍左右;标准化荷载p与孔间距比值n二者呈线性关系;通过不同土体参数及上部荷载的不同情况下的p-n曲线，给出了掏土孔间距建议值。同时，将研究结果与三个实际工程进行对比，发现p-n曲线法与实际结果更为接近。     

Silica-based ceramics toward electromagnetic microwave absorption

Silica-based ceramics have been explored extensively as a class of versatile materials for various applications in architecture, catalysis, energy, machinery, and biomedical engineering. Nevertheless, comprehensive information on silica-based ceramic and electromagnetic microwave (EMW) absorption is scarce, although excellent progress has been made in this field. Here, recent progress in the investigation of silica-based ceramics toward EMW absorption is reviewed. We first introduced the basis of ceramics (characteristics, classification, synthetic methods, potential applications). Subsequently, the silica-based ceramics, including Si-based oxides and alloys, SiOC/SiC/Si₃N₄/SiCN-based composite, Ti₃SiC₂ and composite for EMW absorption were systematically summarized. Notably, the fabrication strategies, absorption properties, and mechanisms of silica-based ceramics are described in detail, with a focus on structure and component design. Lastly, the prospects and ongoing challenges of this field in the future are presented. This review is expected to learn from the past and achieve progress toward the future of silica-based ceramic for EMW absorption.     

Simulations of NBI fast ion loss in the presence of toroidal field ripple on EAST

NBI fast ion losses in the presence of the toroidal field ripple on EAST have been investigated by using the orbit code GYCAVA and the NBI code TGCO. The ripple effect was included in the upgraded version of the GYCAVA code. It is found that loss regions of NBI fast ions are mainly on the low field side near the edge in the presence of ripple. For co-current NBIs, the synergy effect of ripple and Coulomb collision on fast ion losses is dominant, and fast trapped ions located on the low field side are easily lost. The ripple well loss and the ripple stochastic loss of fast ions have been identified from the heat loads of co-current NBI fast ions. The ripple stochastic loss and the collisioninduced loss are much larger than the ripple well loss. Heat loads of lost fast ions are mainly localized on the right side of the radio frequency wave antennas from the inside view toward the first wall. For counter-current NBIs, the first orbit loss due to the magnetic drift is the dominant loss channel. In addition, fast ion loss fraction with ripple and collision for each NBI linearly increases with the effective charge number, which is related to the pitch angle scattering effect.     

Cd-substituted NiZnCo ferrite with high dielectric constant and low coercivity for high-frequency electronic devices

This work investigated the effect of replacing Zn²⁺ ions with Cd²⁺ ions on the microstructure and electromagnetic properties of NiZnCo ferrites. The studies show that the Cd²⁺ ions substituted for Zn²⁺ ions at the A sites (tetrahedral sites) of the ferrite lattice. The large ionic radius of the Cd²⁺ ions can cause lattice distortion. Concurrently, the low melting point of CdO can effectively reduce the sintering temperature of NiZnCo ferrite, thereby significantly changing the magnetoelectric properties of NiZnCo ferrite. These changes are mainly manifested as the decrease in the saturation magnetization (Ms) from 66.6 to 58.5 emu/g and the increase in coercivity (Hc) from 31.2 to 34.8 Oe. The dielectric constant increases considerably, dielectric loss tanδ gradually decreases from 4.71 to 0.83 at 10 kHz, and DC resistivity ρ decreases considerably from 8.0 × 10⁴ to 1.61 × 10⁴ Ω m. Therefore, the substitution of Cd²⁺ ions in NiZnCo ferrite provides excellent electrical and magnetic properties, which provide a reference for the development of high-frequency miniaturized electronic equipment.     

Microstructure,phase, magnetic properties,and electromagnetic wave absorption of graphene oxide – Ni0.7Zn0.3Fe2O4 – Al2O3 aerogel

In this work, an ultralight nanocomposite of graphene oxide aerogels as a matrix and nickel-zinc ferrite (Ni_0.7Zn_0.3Fe₂O₄) nanoparticles as a second phase for the absorption of electromagnetic waves in the frequency of 1–18 GHz were fabricated by the hydrothermal - freeze-drying method. α-Al₂O₃ nanoparticles were used for further impedance matching for applications in electromagnetic wave absorption. XRD, SEM, EDS, and VNA analyses were used to characterize the sample. The effects of the amount of Ni_0.7Zn_0.3Fe₂O₄ (NZF) nanoparticles (GO: NZF volume percent ratio = 5:1 and 2:1) on the absorption of electromagnetic waves were investigated.     

改进RetinaFace的自然场景口罩佩戴检测算法

新型冠状病毒可以通过空气中的飞沫、气溶胶等载体进行传播，在公共场所下正确佩戴口罩可以有效地防止病毒的传播。提出了一种自然场景下人脸口罩佩戴检测方法，对RetinaFace算法进行了改进，增加了人脸口罩佩戴检测任务，优化了损失函数。在特征金字塔网络中引入了一种改进的自注意力机制，增强了特征图的表达能力。建立了包含3 000张图片的数据集，并进行手工标注，用于网络训练。实验结果表明该算法可以有效进行口罩佩戴检测，在自然场景视频中也取得了不错的检测效果。     

结合注意力的3D卷积网络脑胶质瘤分割算法

为了提升脑胶质瘤分割精度，提出一种结合注意力机制的3D卷积神经网络算法。输入3个不同尺度的图像块，经过9个卷积层和1个分类层后得到3个不同的分类结果，将分类结果与注意力学习到的权重相乘并逐体素相加得到输出。此外该算法采用了一种混合Dice损失函数与Focal损失函数的超参数损失函数。实验表明，该算法的Dice系数在整体区域、核心区域以及增强区域分别达到了95.31%、80.12%、82.25%。与已有的一种脑胶质瘤分割算法deepmedic相比，整体区域、核心区域以及增强区域的Dice系数分别提升了3%、2%、6%。在脑胶质瘤分割方面，具有重要的临床意义。     

面向噪声丢包感知的无线网络拥塞算法

针对无线网络链路干扰大、误码率高等特点，以及TCP Westwood算法（TCPW）存在估算带宽时过度依赖包的反馈，缺乏区分传输过程中丢包类型的缺点等问题，提出一种TCPW拥塞控制优化算法--TCPW-F。该算法利用发送速率等构建拥塞因子[F]作为判断丢包类型的依据，同时对判定发生噪声丢包时的拥塞窗口进一步调整，避免噪声丢包引起的窗口下降，提高该情况下窗口的发送效率。仿真结果表明，TCPW-F算法在时延性能方面表现更优，单位时间抖动趋于稳定的速度更快。在同一信道带宽下增大包生成速率，改进算法的实时吞吐量明显高于原算法，具备一定的噪声丢包感知能力，无线网络的TCP传输质量获得较大改善。