New insight into subcritical rupture of SiC-based filaments at intermediate temperatures (400–900 °C) under air

The delayed failure of SiC fibrous reinforcement has continuously been investigated to warrant the long term performances of Ceramic Matrix Composite (CMC). Chiefly assessed on multifilament tow samples to alleviate some handling difficulties, subcritical crack growth (SCG) parameters are however ruled by structural artifacts which hinder the identification of intrinsic filament behavior. In this paper, we propose to estimate the true filament parameters for 5 fiber types from bundle behavior using a recently communicated Monte Carlo algorithm integrating flaw and stress distributions through a deterministic fracture mechanics law under Paris’ formulation. So computed tow lifetime are broadly dispersed, encompassing raw data, and show a structure-dependent scale effect, revealed by n_filament>n_tow where n is the stress exponent. The relationship between SCG coefficient and chemical composition of the substrate is discussed and highlights the major effect of doping elements (Ti or Zr), oxygen or hydrogen content.     

粉体含能材料生产与储运中的静电安全及防护

分析了静电产生的原因,阐述了粉体含能材料生产中的静电起电现象、静电的危害、静电安全性评估标准以及建立在此标准基础上的静电放电危险的评价办法,提出了粉体含能材料在生产、运输中所需要采取的静电防护措施。     

Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

离子交换水软化技术研究与应用进展

离子交换法是目前最常见的水软化技术之一，其基于可逆的离子交换反应将溶液中的硬度离子选择性去除，属于典型的特种分离过程。本文介绍并总结了离子交换水软化的基本原理、水软化用离子交换树脂的结构和分类、离子交换水软化技术研究和应用，并针对离子交换水软化存在的问题提出了相应的解决思路。     

Image analysis applications on assessing static stability and flowability of self-consolidating concrete

A digital image processing (DIP) method associated with a MATLAB algorithm is used to evaluate cross sectional images of self-consolidating concrete (SCC). Two new parameters, such as inter-particle spacing of coarse aggregate and average mortar-to-coarse aggregate ratio, defined as average mortar thickness index (MTI), were proposed to quantitatively evaluate the static stability of SCC. Statistical models were developed to predict flowability of SCC mixtures. Test results revealed that the proposed DIP method and MATLAB algorithm can be successfully used to derive inter-particle spacing and MTI and quantitatively evaluate the static stability on hardened SCC samples. A probability density of 60% from histogram analysis appears to be a reasonable threshold for indicating a uniformly distributed SCC mixture. For a given mortar yield stress, a critical mortar viscosity of 1.30 Pa s tends to significantly affect the trend of slump flow changing with MTI. The investigated relationship between parameters measured from DIP method and existing theoretical frames is well correlated. The outcome of this study can be of practical value for providing an efficient and useful tool in designing mixture proportions of SCC.     

On the design of a new dynamic credit-based end-to-end flow control mechanism for HPC clusters

High Performance Computing usually leverages messaging libraries such as MPI, GASNet, or OpenSHMEM, among others, in order to exchange data among processes in large-scale clusters. Furthermore, these libraries make use of specialized low-level network layers in order to achieve as much performance as possible from hardware interconnects such as InfiniBand or 40 Gb Ethernet, for example. EXTOLL is an emerging network targeted at high performance clusters.Specialized low-level network layers require some kind of flow control in order to prevent buffer overflows at the receiver side. In this paper we present a new end-to-end flow control mechanism that is able to dynamically adapt, at execution time, the buffer resources used by a process according to the communication pattern of the parallel application and the varying activity among communicating peers. The tests carried out on a 64-node 1024-core EXTOLL cluster show that our new dynamic flow control mechanism presents very low overhead with an extraordinarily high buffer efficiency, as overall buffer resources are reduced by 4× with respect to the amount of buffers required by a static flow control protocol achieving similar low overhead levels.     

柔性化夹具静动态特性分析及拓扑优化

针对汽车发动机缸盖、变速箱阀体全自动化混合生产线,设计柔性化夹具来满足CNC高精密加工以及快速换产的要求。建立夹具系统三维模型,并利用ANSYS对夹具系统在不同加工工况载荷下进行静态性能分析;从分析结果判断出影响夹具性能的关键结构,并对其进行拓扑优化设计,实现夹具整体减重39.25 kg。然后对改进后夹具模型进行验证分析,发现最大变形量减少为0.0045199 mm,满足设计指标0.005 mm;最后,对现有夹具系统进行模态实验和CAE模态分析,发现夹具系统在Z向受到低频激振力时,容易发生共振,该频段为70 Hz?110 Hz,在加工过程中需要控制刀具加工频率避免发生共振。     

A directional control method for interface flow considering static voltage stability

A directional control method (DCM) for power flows on a set of interface lines between two regions of power system considering static voltage stability margin is developed in this paper. A surface approximation approach is firstly used to obtain the relationship between the interface flow solution and the generation direction of generator (the portion of generation variation in each participating generator to satisfy the desired power increase on the interface and the system loss). Then, an optimization model is built to determine the optimum dispatching scheme of generators. This method not only can control the total power on the interface to satisfy the power demand but also can realize the directional control of power on each interface line based on the needs of operation. The proposed DCM is further extended to determine the optimum dispatching scheme of generators for maximizing the interface flow margin (IFM), which is the active power margin of the key transmission lines between two regions of power system constrained by static voltage stability. A modified continuation power flow (MCPF) is used to show and evaluate the impacts of the DCM on the IFM. The New England 39-bus system and the IEEE 300-bus system have been employed to verify the effectiveness of the DCM.     

Designed damping controller for SSSC to improve stability of a hybrid offshore wind farms considering time delay

This paper presents the stability improvement results of hybrid doubly fed induction generator (DFIG)-based and permanent magnet generator (PMG)-based offshore wind farms (OWFs) using a static synchronous series compensator (SSSC). An adaptive-network-based fuzzy inference system (ANFIS) controller of the proposed SSSC is designed to render adequate damping characteristics to the studied system. A frequency-domain approach based on a linearized system model using eigenvalue technique analysis is performed. A time-domain scheme based on a nonlinear system model subject to a three-phase short circuit fault at infinite bus with variations in the signal transmission delays has also been investigated to compare the damping of the studied system in cases of with and without controller. The simulation results with MATLAB/SIMULINK toolbox have been presented. It can be concluded from the simulation results that the proposed SSSC joined with the designed ANFIS damping controller can offer adequate damping performance to the studied hybrid DFIG-based and PMG-based OWFs under severe disturbance.     

Multi-Input Single Output SSSC based damping controller design by a hybrid Improved Differential Evolution-Pattern Search approach

In this paper, a hybrid Improved Differential Evolution and Pattern Search (hIDEPS) approach is proposed for the design of a PI-Type Multi-Input Single Output (MISO) Static Synchronous Series Compensator (SSSC) based damping controller. The improvement in Differential Evolution (DE) algorithm is introduced by a simple but effective scheme of changing two of its most important control parameters i.e. step size and crossover probability with an objective of achieving improved performance. Pattern Search (PS) is subsequently employed to fine tune the best solution provided by modified DE algorithm. The superiority of a proposed hIDEPS technique over DE and improved DE has also been demonstrated. At the outset, this concept is applied to a SSSC connected in a Single Machine Infinite Bus (SMIB) power system and then extended to a multi-machine power system. To show the effectiveness and robustness of the proposed design approach, simulation results are presented and compared with DE and Particle Swarm Optimization (PSO) optimized Single Input Single Output (SISO) SSSC based damping controllers. It is observed that the proposed approach yield superior damping performance compared to some approaches available in the literature.