Direct View on the Origin of High Li+ Transfer Impedance in All-Solid-State Battery

Large interfacial resistance plays a dominant role in the performance of all-solid-state lithium-ion batteries. However, the mechanism of interfacial resistance has been under debate. Here, the Li⁺ transport at the interfacial region is investigated to reveal the origin of the high Li⁺ transfer impedance in a LiCoO₂(LCO)/LiPON/Pt all-solid-state battery. Both an unexpected nanocrystalline layer and a structurally disordered transition layer are discovered to be inherent to the LCO/LiPON interface. Under electrochemical conditions, the nanocrystalline layer with insufficient electrochemical stability leads to the introduction of voids during electrochemical cycles, which is the origin of the high Li⁺ transfer impedance at solid electrolyte-electrode interfaces. In addition, at relatively low temperatures, the oxygen vacancies migration in the transition layer results in the formation of Co₃O₄ nanocrystalline layer with nanovoids, which contributes to the high Li⁺ transfer impedance. This work sheds light on the mechanism for the high interfacial resistance and promotes overcoming the interfacial issues in all-solid-state batteries.     

Accelerated bioactive behavior of Nagelschmidtite bioceramics: Mimicking the nano and microstructural aspects of biological mineralization

The ability of the Nagelschmidtite (Nagel) phase to promote osteogenesis, cementogenesis, and angiogenesis increased the interest in using this calcium silicophosphate bioceramic for tissue regeneration and vascularization applications. Nagel phase is a solid solution with the general formula Ca_7-xNa_x(PO₄)_2+x(SiO₄)_2-x, which allows several substitutions being Ca₇(PO₄)₂(SiO₄)₂ the most reported stoichiometry. Inspired by the well-known 45S5 bioactive glass chemical composition, we developed a synthesis route to obtain a Na-rich Nagel single phase. The effect of this bioceramic chemical and structural properties on apatite formation and crystallization mechanism is reported. The structural aspects at the nano and microscale of the mechanism of apatite growth and crystallization from the Nagel phase were compared to the formation process of Extra-Cellular Matrix (ECM) deposits in biological systems, revealing a biomimetic behavior during the apatite biomineralization process from the bioceramic.     

基于改进相干增强扩散与纹理能量测度和高斯混合模型的导光板表面缺陷检测方法

针对液晶屏(LCD)导光板表面缺陷检测方法存在漏检率和误检率较高,对产品表面复杂渐变的纹理结构适应性差的问题,提出一种基于改进相干增强扩散(ICED)与纹理能量测度和高斯混合模型(TEM-GMM)的LCD导光板表面缺陷检测方法。首先,构建ICED模型,基于结构张量引入平均曲率流扩散(MCF)滤波,使得相干增强扩散(CED)模型对缺陷的细线状纹理有良好的边缘保持效果,并利用相干性得到缺陷纹理增强和背景纹理抑制的滤波后图像;然后,根据Laws纹理能量测度(TEM)提取图像纹理特征,将图像的背景纹理特征作为离线阶段高斯混合模型(GMM)的训练数据,使用期望最大化(EM)算法估计GMM参数;最后,计算待检测图像各像素的后验概率,并将其作为在线检测阶段缺陷像素的判断依据。实验结果表明,该检测方法在导光颗粒随机、规则两种分布的缺陷图像测试数据组上的漏检率和误检率分别为3.27%、4.32%和3.59%、4.87%。所提检测方法适用范围广,可有效检测出LCD导光板表面划痕、异物、脏污和压伤等类型的缺陷。     

Surfactant-free electrochemical synthesis of fluoridated hydroxyapatite nanorods for biomedical applications

Fluoridated hydroxyapatite (FHA) [Ca₁₀(PO₄)₆F_x(OH)_2−x, x = 0–2] is believed to be a promising calcium phosphate (CaP) to replace pure hydroxyapatite (HA) for next-generation implants, owing to its better biocompatibility, higher antibacterial activity, and lower solubility. Notably, the shape and size of the CaP crystals play key roles in their performance and can influence their applications. One-dimensional (1D) FHA nanorods are important CaP materials which have been widely used in regenerative medicine applications such as restorative dentistry. Unfortunately, the traditional synthesis methods for FHA nanorods either employ surfactants or take a relatively long time. In this study, we aimed to propose a facile synthesis route to fabricate FHA nanorods without any surfactants using an electrochemical deposition method for the first time. This study focused on preparing FHA nanorods without the assistance of any surfactant, unlike the traditional synthesis methods, to avoid chemical impurities. FHA nanorods with lengths of 124–2606 nm, diameters of 28–211 nm, and aspect ratios of 4.4–21.8 were synthesized using the electrochemical method, followed by a heat treatment. For the as-synthesized FHA nanorods, the Ca/P ratio was 1.60 and the atomic concentration of F was 2.06 at.%. An ultrastructure examination revealed that each FHA nanorod possessed long-range order, good crystallinity, and a defect-free lattice with a certain crystallographic plane orientation along the whole rod. In short, we propose a novel, surfactant-free, cost-saving, and more efficient route to synthesize FHA nanorods which can be widely applied in multiple biomedical applications, including drug delivery, bone repair, and restorative dentistry.     

Interconnected SiC–Si network reinforced Al–20Si composites fabricated by high pressure solidification

The microstructures and mechanical properties of the interconnected SiC–Si network reinforced Al–20Si composites solidified under high pressures were investigated. The results demonstrate that the complete interconnected SiC–Si network can be obtained by high pressure solidification, and the connected micron-sized pores are uniformly distributed in the interconnected SiC–Si network. The compressive strength and microhardness of the SiC/Al–20Si composites solidified under 3 GPa were 723 MPa and 229 HV_0.05, respectively. Furthermore, the fracture process of SiC/Al–20Si composites was studied by in situ TEM tensile testing. The result shows that the crack first initiated and propagated at the Al/Si interface under an external load, and the SiC particles in the interconnected SiC–Si network can effectively hinder the crack propagation, thus enhancing the strength.     

Fabrication and optical properties of transparent LaErZr2O7 ceramic with high excess contents of La and Er

In this study, transparent LaErZr₂O₇ ceramic with high excess La and Er contents (nominally La_1.28Er_1.28Zr₂O_7.84) was successfully prepared by vacuum sintering at 1850?°C for 6?h using nanosized powder. The XRD, SEM, EDX and TEM results reveal that the single pyrochlore phase in the powder sample transforms to the coexistence of La-rich pyrochlore phase and Er-rich defect fluorite phase after high temperature sintering. The high excess amounts of La and Er favor the formation of pyrochlore structure. Despite the coexistence of two phases, the sample with 1?mm thickness shows excellent in-line transmittance in the visible to mid-infrared region (as high as 81% at 1100?nm). The upconversion and infrared emission under 980?nm exciting were measured and discussed as well.     

Determination and identification of titanium dioxide nanoparticles in confectionery foods,marketed in South Korea,using inductively coupled plasma optical emission spectrometry and transmission electron microscopy

Food-grade titanium dioxide (TiO₂) is a common and widespread food additive in many processed foods, personal care products, and other industrial categories as it boosts the brightness and whiteness of colours. Although it is generally recognised as safe for humans, there is a growing interest in the health risks associated with its oral intake. This study quantified and identified TiO₂ nanoparticles present in confectionery foods, which are children’s favourite foods, with inductively coupled plasma optical emission spectrometry (ICP-OES) and transmission electron microscopy (TEM). A reliable digestion method using hot sulphuric acid and a digestion catalyst (K₂SO₄:CuSO₄ = 9:1) was suggested for titanium analysis. Validations of the experimental method were quite acceptable in terms of linearity, recoveries, detection limits, and quantification limits. Of all the 88 analysed foods, TiO₂ was detected in 19 products, all except three declared TiO₂ in their labelling. The mean TiO₂ content of candies, chewing gums, and chocolates were 0.36 mg g^?1, 0.04 mg g^?1, and 0.81 mg g^?1, respectively. Whitish particles isolated from the confectionery foods were confirmed as TiO₂ nanoparticles via TEM and energy dispersive X-ray spectroscopy (EDX), in which nanosized particles (<100 nm) were identified.     

Enhancement of resistance to galvanic corrosion of ZE41 Mg alloy by equal channel angular pressing

The galvanic corrosion behavior of as-received and ECAPed ZE41 Mg alloy coupled with Al7075 alloy is investigated using zero resistance ammeter in three different corrosive environments, 0, 0.1, and 1 M NaCl, to mimic the conditions experienced in engineering applications. The mechanism of galvanic corrosion for the ZE41 Mg–Al7075 aluminum alloy is explained. It is observed that a robust surface film containing a composite layer of oxide/hydroxide of magnesium and aluminum is established in deionized water (0 M). However, only a single layer of magnesium oxide/hydroxide is detected in chloride-containing environments. Equal channel angular pressing (ECAP) improved the resistance to galvanic corrosion by 58% and 54% when compared with the as-cast counterparts in 0 and 1 M NaCl solution, respectively. In contrast, galvanic corrosion resistance decreased by 26% in 0.1 M NaCl after ECAP while the as-received samples evinced pits unfavorable to be used in engineering applications. ECAP is a promising method to combat galvanic corrosion encountered by ZE41 magnesium alloy used in automobiles and components of military vehicles.     

In Situ Liquid-Cell TEM Observation of Multiphase Classical and Nonclassical Nucleation of Calcium Oxalate

Calcium oxalate (CaOx) is the major phase in kidney stones and the primary calcium storage medium in plants. CaOx can form crystals with different lattice types, water contents, and crystal structures. However, the conditions and mechanisms leading to nucleation of particular CaOx crystals are unclear. Here, liquid-cell transmission electron microscopy and atomistic molecular dynamics simulations are used to study in situ CaOx nucleation at different conditions. The observations reveal that rhombohedral CaOx monohydrate (COM) can nucleate via a classical pathway, while square COM can nucleate via a non-classical multiphase pathway. Citrate, a kidney stone inhibitor, increases the solubility of calcium by forming calcium-citrate complexes and blocks oxalate ions from approaching calcium. The presence of multiple hydrated ionic species draws additional water molecules into nucleating CaOx dihydrate crystals. These findings reveal that by controlling the nucleation pathways one can determine the macroscale crystal structure, hydration state, and morphology of CaOx.     

Microstructural characterization of plasma sprayed Ln2Zr2O7 thermal barrier coatings by electron microscopy methods

The presented article characterized microstructural aspects of thermal barrier coatings (TBCs) analysis using methods of electron microscopy such as electron backscatter diffraction (EBSD), transmission/scanning electron microscopy (S/TEM), and TEM. The analyzed TBC system is based on gadolinium zirconate deposited by air plasma spraying method, and additionally, it was subjected to an oxidation test for 500 hr at a temperature of 1,100°C. Moreover, the morphological characterization of feedstock powder was showed. EBSD analysis revealed the inhomogeneity of feedstock materials in the form of complex phase composition. In the case of deposited coating, this method was used to characterize the crystallite size of zirconate coating and phase composition of thermally grown oxide zone. S/TEM and TEM analysis showed morphological details of this zone but not revealed such phase as perovskite oxide of GdAlO₃ type.