基于GIS单线图的配网停电单模拟操作应用研究

配电网停电会造成电力系统供配电可靠性以及服务质量下降,研究基于地理信息系统(GIS)单线图的配网停电单模拟操作应用。利用网格长度作为基本单位建立坐标系,以选取起始点与终止点为基础,通过四参数法将GIS坐标映射至图纸网格内,实现配网内设备初步布局,将杆塔、站房和整体均匀分布作为优化目标,设置多目标优化目标函数实现GIS单线图最终优化。选取某电力公司配网作为单模拟操作应用对象,模拟结果表明,单模拟操作配网停电后,该配网各负荷点年故障率、次平均停电时间以及年停电时间均有所减少,可有效提升配网的供配电可靠性。     

Synthesis,characterization, and electrochemical performance of the ternary layered composite (1-x-y) LiNi1/3Co1/3Mn1/3O2·xLi2MnO3·yLiCoO2

Composite ceramic cathodes represented by the formula (1-x-y) LiNi_1/3Co_1/3Mn_1/3O₂·xLi₂MnO₃·yLiCoO₂ were studied. A ternary compositional diagram was built with these ceramic materials as end-members, and selected points were chosen to represent the compositional space. Synthesized ceramic composite materials were investigated as to whether integration of structurally compatible units leads to improved electrochemical performance. Detailed structural (X-ray diffraction – XRD), elemental (X-ray photoelectron spectroscopy-XPS), microstructure (Scanning electron microscopy – SEM), and electrochemical (galvanostatic testing of half-cells) studies were performed and are presented. Within eight samples studied three compositions are found to exhibit first discharge capacity of around 230 mAh/g.     

大规模多状态计算系统的容错性能分析

针对异构计算节点组成的大规模多状态计算系统的容错性能分析问题，提出了一种计算系统容错性能的评估方法。该方法采用自定义的两级容错性能形式化描述框架进行系统描述，通过构造多值决策图（Multi-value Decision Diagram，MDD）模型对系统进行容错性能建模，并基于构造的模型高效地计算出部件故障的条件下计算系统在特定性能水平上运行的概率，减少了计算的冗余性。实验结果表明，该方法在模型的大小和构建时间上均优于传统方法。该方法的提出将对系统操作员或程序设计者具有重要意义，使其确保系统适合预期应用。     

EFFECT OF MICRITE CONTENT ON CALCITE CEMENTATION IN AN UPPER JURASSIC CARBONATE RESERVOIR,EASTERN SAUDI ARABIA

Cementation is a primary factor reducing the porosity of carbonate rocks. It is a challenge to accurately model cementation for reservoir quality prediction because cementation is often a syndepositional process. In addition, cementation requires fluid flow to transport chemical species for precipitation within the pore spaces in a sediment. The development of fully‐coupled depositional‐hydrogeochemical models for cementation prediction is desirable, but the parameters which control the extent of cementation need to be identified and evaluated. This study uses petrographic data from 583 carbonate samples from 15 wells in an Upper Jurassic (Kimmeridgian) reservoir at a giant oilfield in eastern Saudi Arabia to investigate the controlling effects of micrite content on cementation in carbonate rocks. The results indicate that the amount of cement decreases with increasing micrite content in the carbonate rocks analysed. In addition, a modified Houseknecht method has been developed to assess the relative fractions of porosity reduction in carbonate sediments due to compaction and cementation. The method highlights variations in depositional porosity for different rock textures and distinguishes microporosity from interparticle porosity. In the studied samples, the total porosity loss due to compaction and cementation is generally less than 45%, and samples lose more porosity due to compaction than cementation. The relative importance of compaction and cementation in reducing porosity is different for different rock textures: wackestones and mudstones lose porosity mostly as a result of compaction, while grainstones, mud‐lean packstones and packstones lose porosity due to both compaction and cementation.     

P-V图和阀片运动图在冰箱压缩机性能评价中的应用

通过建立新的实验平台，准确测量压缩机各腔体内的气体压力和吸排气阀片的升程量，获取真实的P-V图和阀片运动图。对压缩机P-V图和阀片运动图进行同步研究和分析，得到阀片动作与压缩机内部工作过程的耦合关系，从而为压缩机优化提供方法。实验数据表明：在ASHRAE工况下，该款压缩机循环功耗为66.825W，其中排气压力损失功耗占比为4.254%，吸气压力损失功耗占比为1.2%，吸气阀片位移为2.148mm，排气阀片位移为0.825mm。对压缩机吸排气阀片延时现象进行了分析。     

基于三维成形极限应力图的AA6061挤压管材成形性能分析

为解决AA6061挤压管材成形性能极差的问题，建立了“固溶水淬+颗粒介质胀形+人工时效”的铝合金管件成形工艺流程。研究了固溶水淬和人工时效工艺参数对材料性能影响规律，并建立了考虑厚向应力的三维成形极限应力图；建立了管件颗粒介质胀形有限元仿真模型，分析管件变形特征质点的运动轨迹和应力应变状态，并应用理论成形极限图对管件破裂失稳点和胀形极限进行分析和预判。四方截面管件胀形工艺试验结果表明，颗粒介质胀形工艺与合适的热处理工艺相结合能够有效地解决AA6061挤压管材的成形问题；考虑厚向应力的三维成形极限应力图可作为铝合金管件胀形工艺方案制定的破裂失稳判据。     

Effect of Li2O on the crystallization behavior of CaO-Al2O3-SiO2-Li2O-Ce2O3 mold slags

The effect of Li₂O on the crystallization properties of CaO-Al₂O₃-SiO₂-Li₂O-Ce₂O₃ slags was investigated. With increasing the Li₂O content, LiAlO₂ and CaCeAlO₄ were the main crystalline phases. LiAlO₂ formed for the charge compensating of Li⁺ ions to [AlO₄^5?]-tetrahedrons, and CaCeAlO₄ formed as a result of the charge balance of Ce³⁺ ions, Ca²⁺ ions, and [AlO₆^9?]-octahedrons. Increasing the content of Li₂O to 10%, the crystallization temperature was the highest, and the incubation time was the shortest. The crystallization ability was strong due to the three factors of strengthening the interaction between ions and ion groups, decreasing the polymerization degree, and increasing the melting temperature. Further increasing the content of Li₂O, the crystallization performance was obviously suppressed, because the melting temperature and the force between the cations and the anion groups decreased.     

Application of high‐resolution NVD differencing schemes to the FTn finite volume method for radiative heat transfer

In this work, the STEP scheme and several schemes based on the normalized variable diagram (NVD), such as MINMOD, GAMMA, CLAM, NOTABLE, MUSCL, CUBISTA, SMART, WACEB, and VANOS schemes, are evaluated for solving the radiative transfer equation. Two‐dimensional and three‐dimensional rectangular enclosures containing transparent, emitting–absorbing, emitting–absorbing–scattering, or nonhomogeneous participating media are investigated using the modified FTn finite volume method. Although the NVD schemes are much more accurate than the STEP scheme, but they have more time‐consuming and require more iterations. Moreover, most of them often necessitate underrelaxation to ensure convergence. Results show that the MINMOD and GAMMA schemes are still much less accurate than other NVD schemes, but they converge the fastest of the NVD schemes, and do not require underrelaxation. Although the VANOS, WACEB, and SMART schemes give more accurate solutions, they are not competitive with other NVD schemes. However, the CLAM, NOTABLE, and CUBISTA schemes are relatively fast and accurate.     

Crystal structure,polarization properties and reverse nonlinearity of solid solutions of the KNN-PZT system in a wide range of external influences

Experimental research of the crystal structure, polarization properties, and reverse nonlinearity of ceramic solid solutions of the (1-x) (Na_0·5K_0.5)NbO₃-xPb(Ti_0·5Zr_0.5)O₃ (KNN-PZT) quasi-binary system with 0.0 = x ≤ 1.0 in a wide range of external influences (temperatures, strength of dc/ac fields) has been done. Based on the X-ray structural data, an x-T diagram of the system has been constructed, and correlations of the behavior of the macroproperties of solid solutions with the features of their phase states with the temperature change have been established. It has been concluded that it is advisable to use the proposed compositions when designing microelectronic devices operating in various extreme conditions.