Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping

Titanium and boron are simultaneously introduced into LiNi_0.8Co_0.1Mn_0.1O₂ to improve the structural stability and electrochemical performance of the material. X-ray diffraction studies reveal that Ti⁴⁺ ion replaces Li⁺ ion and reduces the cation mixing; B³⁺ ion enters the tetrahedron of the transition metal layers and enlarges the distance of the [LiO₆] layers. The co-doped sample has spherical secondary particles with elongated and enlarged primary particles, in which Ti and B elements distribute uniformly. Electrochemical studies reveal the co-doped sample has improved rate performance (183.1 mAh·g^-1 at 1 C and 155.5 mAh·g^-1 at 10 C) and cycle stability (capacity retention of 94.7% after 100 cycles at 1 C). EIS and CV disclose that Ti and B co-doping reduces charge transfer impedance and suppresses phase change of LiNi_0.8Co_0.1Mn_0.1O_2.     

Effect of Nb content on the phase composition,densification, microstructure,and mechanical properties of high-entropy boride ceramics

Dense high-entropy (Hf,Zr,Ti,Ta,Nb)B₂ ceramics with Nb contents ranging from 0 to 20 at% were produced by a two-step spark plasma sintering process. X-ray diffraction indicated that a single-phase with hexagonal structure was detected in the composition without Nb. In contrast, two phases with the same hexagonal structure, but slightly different lattice parameters were present in compositions containing Nb. The addition of Nb resulted in the presence of a Nb-rich second phase and the amount of the second phase increased as the Nb content increased. The relative densities were all >99.5 %, but decreased from ～100 % to ～99.5 % as the Nb content increased from 0 to 20 at%. The average grain size decreased from 13.9 ± 5.5 μm for the composition without Nb additions to 5.2 ± 2.0 μm for the composition containing 20 at% Nb. The reduction of grain size with increasing Nb content was due to the suppression of grain growth by the Nb-rich second phase. The addition of Nb increased Young’s modulus and Vickers hardness, but decreased shear modulus. While some Nb dissolved into the main phase, a Nb-rich second phase was formed in all Nb-containing compositions.     

Chemistry enhanced shear thickening polishing of Ti–6Al–4V

To obtain the great surface quality of Ti–6Al–4V and achieve high efficiency in the polishing process, the chemistry enhanced shear thickening polishing (C-STP) was proposed, and the polishing performance of different pH slurry was studied. The results show that the material removal rate gradually increases as the pH value decreases from 10 to 1, and the best surface quality is obtained at pH 2. The corrosion current density and potential were measured by potentiodynamic polarization under three typical pH values. It is confirmed that the most massive corrosion rate presents at pH 2, and the passive film is most susceptible to be produced at pH 10. The reaction resistance was measured by electrochemical impedance spectroscopy to clarify the polishing mechanism. Under acidic conditions, the chemical reaction product on the surface can be quickly removed by mechanical action of the abrasive. On the contrary, the passive film formed on the surface under the alkaline condition is difficult to be removed. The corrosion reaction products were determined by X-ray photoelectron, and the chemical reaction under acid-base environment was derived. MRR reached 107.3 nm/min under the selected process parameters, and the surface roughness (S_a) is reduced from 124 nm to 8.6 nm within 15 min.     

0Cr17Ni4Cu4Nb传感器断裂原因分析

某力学传感器在出厂检验流程中发生断裂失效,为了确定失效原因,防止此类失效事件再次发生,实验对该传感器的力学性能、金相组织和断口形貌进行了分析,确定了断裂原因。结果表明,传感器的失效模式为氢致延迟开裂,材料中氢含量偏高和开裂位置机加工质量较差是导致传感器发生氢致开裂的主要原因。结合失效原因,提出了改进措施。     

Formation mechanism of Ti(C,N) solid solution in Al-brown fused alumina refractory at 1973 K in flowing N2

Brown fused alumina is a cost-effective alumina material, and the state of Ti in alumina has a great influence on its high-temperature performance. In this paper, the Ti-containing phases in brown fused alumina particles and Al-brown fused alumina refractory were successfully transformed into Ti(C,N) at 1973 K in flowing N₂. The evolution of the Ti-containing phases in brown fused alumina under high temperature and nitrogen conditions was investigated by XRD, SEM and EDS. The results show that the Ti-containing phases in brown fused alumina include Ti₂O₃, Ti(C,N,O), TiFeSi₂, Ca_0·95Mg_0·9Al_10·1(Ti)O₁₇ and a low-melting point Ca₃Al₂Si₃(Mg,Ti)O₁₂ phase. Under high temperature and nitrogen conditions, the TiO_2[liquid], MgO_[liquid] and SiO_2[liquid] in the low-melting point phase are transformed into Ti(C,N), Mg(g) and SiO(g), while they are supplemented from Ti₂O₃, Ti(C,N,O) and Ca_0·95Mg_0·9Al_10·1(Ti)O₁₇. After heat treatment at 1973 K for 3 h, Ti₂O₃ and Ti(C,N,O) disappear, Ca_0·95Mg_0·9Al_10·1(Ti)O₁₇ is transformed into plate-like Ca_0·55Al₁₁O_17.05, and Ti(C,N) is formed on the surface of the corundum particles. The formation of Ti(C,N) reduces the porosity of the brown fused alumina particles and increases their strength.     

Extracellular Vesicles: Messengers of p53 in Tumor–Stroma Communication and Cancer Metastasis

Tumor progression to a metastatic and ultimately lethal stage relies on a tumor-supporting microenvironment that is generated by reciprocal communication between tumor and stromal host cells. The tumor–stroma crosstalk is instructed by the genetic alterations of the tumor cells—the most frequent being mutations in the gene Tumor protein p53 (TP53) that are clinically correlated with metastasis, drug resistance and poor patient survival. The crucial mediators of tumor–stroma communication are tumor-derived extracellular vesicles (EVs), in particular exosomes, which operate both locally within the primary tumor and in distant organs, at pre-metastatic niches as the future sites of metastasis. Here, we review how wild-type and mutant p53 proteins control the secretion, size, and especially the RNA and protein cargo of tumor-derived EVs. We highlight how EVs extend the cell-autonomous tumor suppressive activity of wild-type p53 into the tumor microenvironment (TME), and how mutant p53 proteins switch EVs into oncogenic messengers that reprogram tumor–host communication within the entire organism so as to promote metastatic tumor cell dissemination.     

Nitrogen oxides reduction by liquid petroleum gas over Co–Ce–Ti catalysts in a simulated rotary reactor

Hydrocarbons could be used as the reductant for elimination of NO_x emissions. Liquid petroleum gas, with higher carbon hydrocarbons and cheaper costs, may be of practical value as reducing agents. Due to the consumption of hydrocarbons by oxygen, the NO_x reduction efficiency is significantly inhibited by oxygen in the flue gas. In this research, a novel rotary reactor, realizing the alternating cycle of adsorption zone and reduction zone, was proposed to overcome this negative effect. Co–Ce–Ti mixed oxide catalysts synthesized by a sol–gel method were tested in a simulated rotary reactor for NO_x removal by liquid petroleum gas and characterized by SEM, BET, XRD and XPS. The results showed that catalysts exhibited better NO conversion efficiency at higher temperature but were highly susceptible to oxygen. Catalysts achieved nearly full removal of NO_x from flue gas at 300 °C in a simulated rotary reactor, and 300 °C is considered to be the most optimum temperature with lower energy consumption and excellent flue gas purification performance.     

Short SiC fiber/Ti3SiC2 MAX phase composites: Fabrication and creep evaluation

The compressive creep of silicon carbide fiber reinforced Ti₃SiC₂ MAX phase with both fine and coarse microstructure was investigated in the temperature range of 1000-1300°C. Comparison of only steady-state creep was done to understand the response of fabricated composite materials toward creep deformation. It was demonstrated that the fibers are more effective in reducing the creep rates for the coarse microstructure by an increase in activation energy compared to the variant with a finer microstructure, being partly a result of the enhanced creep rates for the microstructure with larger grain size. Grain boundary sliding along with fiber fracture appears to be the main creep mechanism for most of the tested temperature range. However, there are indications for a changed creep mechanism for the fine microstructure for the lowest testing temperature. Local pores are formed to accommodate differences in strain related to creeping matrix and predominantly elastically deformed fibers during creep. Microstructural analysis was done on the material before and after creep to understand the deformation mechanics.