Synthesis and characterization of SrFeOx hetero-film resistance-switching device with low operation voltage

As a critical topological phase transition material, SrFeO_x could play an essential role in the field of resistive memory. How to implement resistance-switching more softly and ensure the stability of materials has always been a relevant research hotspot. Regulating the oxygen environment during the deposition process of the films can effectively control the stoichiometry of the functional layer and then improve the resistance-switching characteristics of the device. In this paper, a SrFeO_x hetero-film was prepared by oxygen pretreatment on the SrRuO₃ surface before SrFeO_x deposition, and the as-assembled micrometer-scale device exhibits a low set operating voltage of 0.6 V and favorable cycling characteristics. The SrFeO_x hetero-film reveals a vertical brownmillerite superlattice-like structure with ～20 nm perovskite buffer layer, which benefits the connection and rupture of conductive filament. Additionally, XPS and UV–vis were used to analyze the bonding energy and band gap of SrFeO_x hetero-film, and offers the experimental basis for the explanation of the conductive mechanism. Therefore, the device based on SrFeO_x hetero-film with low operation voltage provides a reference for low power consumption research on topological phase transition material.     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。     

Process and joint quality of ultrasonic vibration enhanced friction stir lap welding

In order to improve the process effectiveness and joint quality, ultrasonic vibrations were integrated with friction stir lap welding. Effect of ultrasonic exertion on the process and joint quality of AA 6061-T6 were investigated. Upon ultrasonic exertion, joints owned larger effective lap width, shorter hooks and improved strength. Weld fracture mode changed from a ductile–brittle mixed mode to a more ductile mode while the fracture path shifted from lap interface to beyond the stir zone. Material flow and interface defects were characterised using lap welded dissimilar aluminium alloy joints. Ultrasonic vibration improved the material flow and reduced the interfacial defects. Variations in failure load of joints were found in accordance with the variations in material flow and interfacial defects.     

AP1000稳压器波动管竖直管段空气-水CCFL实验研究

使用竖直管代替波动管模型开展稳压器波动管竖直管段内空气-水两相逆流限制（CCFL）特性可视化实验研究。实验现象表明:竖直管与上容器接口处的局部CCFL决定了进入竖直管内的液相流量；竖直管内的局部CCFL决定了从竖直管流出的液相流量；两处局部CCFL均随空气流量的增大而增强。在较低气量情况，进入竖直管内的液相能够完全或大部分流出，竖直管内的局部CCFL较弱，上容器和竖直管接口处的局部CCFL在整体CCFL中占主导地位，整体CCFL程度随着上容器液位升高而略有增强。在高气量情况，从上容器进入竖直管的液相大部分或者完全被限制而不能向下流出，竖直管内的局部CCFL强烈，在整体CCFL中占主导地位，整体CCFL特性不受上容器液位变化的影响。通过实验数据拟合得到了新的稳压器竖直管CCFL模型。稳压器波动管CCFL数据和稳压器竖直管CCFL数据基本重合，表明波动管CCFL主要由CCFL-U决定。      

垂直冲击试验机的研制

为满足简便检测塑料产品抗冲击强度的需求,研制了垂直冲击试验机。对垂直冲击试验机的结构进行了设计,基于力学原理进行了受力计算,并对工作原理与相对基准设定问题进行了分析。介绍了垂直冲击试验机的操作方法,并进行了规格校验。     

垂直段高度对特厚板坯内部夹杂物的影响

夹杂物是降低铸坯内部质量的重要缺陷。增加连铸机垂直段高度有利于减少铸坯内部夹杂物的数量并改善其分布。为了得出适宜的垂直段高度,采用数值模拟方法研究了连铸机垂直段高度对特厚板坯内部钢液流动和夹杂物运动的影响。研究结果表明,垂直段高度为3.5m时,有利于特厚板坯中夹杂物上浮并良好分布。研究结果对选择特厚板坯连铸机的垂直段高度具有重要意义。     

Improving performance of high-power indium gallium nitride/gallium nitride-based vertical light-emitting diodes by employing simple n-type electrode pattern

In this work, simple n-type electrode structures were used to enhance the electrical and optical performances of fully packaged commercially mass-produced vertical-geometry light-emitting diodes (VLEDs). The forward bias voltage of the VLED with a Y-pattern electrode increased less rapidly than that of VLEDs with a reference electrode. The VLEDs with the reference and Y-pattern electrodes exhibited forward voltages of 2.93±0.015 and 2.89±0.015 V at 350 mA and 3.77±0.015 and 3.53±0.015 V at 2000 mA, respectively. The VLEDs with the Y-pattern electrode resulted in a higher light output than the VLEDs with the reference electrode with increase in the drive current to 2000 mA. The emission images showed that the VLEDs with the Y-pattern electrode exhibited better current spreading behavior and lower junction temperatures than the VLEDs with the reference electrode. With increase in the current from 350 to 2000 mA, the VLEDs with the Y-pattern electrode experienced a 39.4% reduction in the wall plug efficiency, whereas the VLEDs with the reference electrode suffered from a 43.3% reduction.     

15/25MN立捣卧挤炭素挤压机主机装配攻关

立捣卧挤炭素挤压机采用立式捣固预压,卧式挤压,旋转料室+延长料室结构,旋转料室和延伸料室均采用过盈配合,粗加工后要进行热装,压机整体高度较高,由于厂内不具备现场安装条件,导致装配难度很大,通过工艺和装配攻关,确定合理的安装方案,制作专用工装工具,采取相应措施,保证装配精度符合要求。     

立磨机在某硫精矿中回收锌的应用

从立磨机的结构和工作原理入手,介绍了立磨机在云南某大型硫精矿再磨提锌的应用情况。硫精矿入磨粒度-74μm占80%,产品粒度-45μm占90%,磨矿产品经三次精选达到含锌43%、含铅7. 5%,锌回收率55%、铅回收率18%的合格混合精矿,实现明显的经济效益。     

Comparative study of zein- and gluten-based wood adhesives containing cellulose nanofibers and crosslinking agent for improved bond strength

Many of the currently used wood adhesives contain chemicals that are harmful to human health and the environment. Increasing environmental and human health concerns have made the development of safe biobased adhesives a priority. In this study, two plant proteins, i.e., zein and wheat gluten, were used to develop wood adhesives and their performance was compared through simple lap shear tests and plywood flexural/internal bond tests in dry and wet conditions. To increase their bond strength, cellulose nanofibers were added to create nanocomposite adhesives and glutaraldehyde was also used to crosslink the proteins. Single-lap shear test was performed to measure the bond strength of different adhesive formulations and determine the optimal formulations and processing conditions. Fractured bond surfaces were studied using optical observation and scanning electron microscopy to determine bond failure mechanisms. Thermal and chemical properties of the adhesives were evaluated using thermogravimetric analysis and Fourier transform infrared spectroscopy, respectively. The bond strength of both zein and gluten adhesives was significantly increased by the addition of the cellulose nanofibers and/or glutaraldehyde, although the two adhesives responded differently to the two reinforcement materials due to the different solvents used to prepare the adhesives. The bond failure mode changed from cohesive failure of the adhesive to structural failure of the adherent for the gluten adhesive containing CNFs and glutaraldehyde. Potential zein and gluten adhesive formulations were used to produce plywood samples and their performance was assessed under different conditions. The formulations with industrial potential were discovered through this study.