Experimental research on micro hole drilling of polycrystalline Nd:YAG

Polycrystalline Nd:YAG materials have wide applications in solid-state lasers. In this study, micro hole drilling experiments were performed on polycrystalline Nd:YAG using a polycrystalline diamond micro drill. The hole diameter, edge chipping, and hole wall surface quality were examined in detail. The results showed that the hole diameter was slightly larger than tool diameter. A diameter error of less than 5.5% was achieved. The edge chipping at the entry hole was formed by the encircled petal shape exfoliations, which were produced by the indentation and rotation movement in the drilling entry stage. Edge chipping at the exit hole was generated by an entire piece of exfoliation, which was produced by a circle of microcracks around the tool tip propagating to the bottom surface in the drilling exit stage. The edge chipping width at the entry hole was smaller than that at the exit hole. Based on different material removal modes, the hole surface morphology was classified into three types: ductile removal, coexisting ductile and brittle removal, and brittle removal. The hole surface quality mainly depended on the proportion of the brittle fracture to ductile removal surface.     

Comparative study of LuxY1-xAG (x=0..1) laser ceramics doped with 5% Yb3+

Materials with high thermo mechanical properties are required as laser media for high-powered lasers. One of such materials is lutetium-aluminum garnet (LuAG) doped with ytterbium. In the present work, we discuss for the first time a full comparative study of 5% Yb-doped LuYAG ceramics with variation Lu/Y ratio. Samples were prepared with addition of B₂O₃, MgO and SiO₂ which were used as sintering aids. Grain sizes, shrinkage curves, lattice constants and transmission spectra were measured for all samples. Thermal conductivity was measured in a wide temperature range for all studied samples. Output power of 12 W and 60% slope efficiency were obtained on the 5% Yb:LuAG disk laser.     

Doping manganese into CsPb(Cl/Br)3 quantum dots glasses: Dual-color emission and super thermal stability

CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) represent bright and tunable photoluminescence, it is regrettable that the air instability and poor water resistant properties prevent their application in optoelectronic devices. At the same time, the toxicity of lead is also a major factor restricting its development. As a consequence, we demonstrate the partial replacement of Pb with Mn through conventional melt-quenching and heat-treatment method preparation of Mn-doped CsPb(Cl/Br)₃ QD glass. Mn-doped CsPb(Cl/Br)₃ QD glass exhibits high luminescent intensity like QDs. It is important that Mn-doped CsPb(Cl/Br)₃ QD glass with Dual-Color maintained the same lattice structure like Mn-doped CsPb(Cl/Br)₃ QDs, and highly homogeneous spectral characteristics of Mn luminescence. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as the Pb-to-Mn feed ratio, annealing temperature. More importantly, the as-prepared orange Mn-doped CsPb(Cl/Br)₃ QD glass was employed to fabricate white LEDs combined with a commercial Ce³⁺:Y₃Al₅O₁₂ phosphor-in-glass (Ce-PiG) on top of a InGaN blue chip. And the constructed WLEDs generate a warm white with an optimal luminous efficacy (LE) of 67.00 lm/W, a high CRI of 81.4, and a low CCT of 4902 K.     

Influence of Yb and Si on the fabrication of Yb:YAG transparent ceramics using spherical Y2O3 powders

Yb:YAG (yttrium aluminum garnet) transparent ceramics were fabricated by the solid-state method using monodispersed spherical Y₂O₃ powders as well as commercial Al₂O₃ and Yb₂O₃ powders. Pure YAG phase was obtained at low temperature due to homogeneous mixing of powders. Under the same sintering conditions, the Yb:YAG ceramics with different doping contents of Yb³⁺ had similar morphologies and densification rates. After being sintered at 1700 °C in vacuum, the ceramic samples had high transparencies. The Yb:YAG ceramics doped with 0.5 wt% SiO₂ formed Y–Si–O liquid phase and nonstoichiometric point defects that enhanced sintering. Compared with Nd doping, Yb doping hardly affected the YAG grain growth, sintering densification or optical transmittance, probably because Yb³⁺ easily entered the YAG lattice and had a high segregation coefficient.     

Dual effect synergistically triggered Ce:(Y,Tb)3(Al,Mn)5O12 transparent ceramics enabling a high color-rendering index and excellent thermal stability for white LEDs

Ce:Y₃Al₅O₁₂ transparent ceramics (TCs) with appropriate emission light proportion and high thermal stability are significant to construct white light emitting diode devices with excellent chromaticity parameters. In this work, strategies of controlling crystal-field splitting around Ce³⁺ ion and doping orange-red emitting ion, were adopted to fabricate Ce:(Y,Tb)₃(Al,Mn)₅O₁₂ TCs via vacuum sintering technique. Notably, 85.4 % of the room-temperature luminescence intensity of the TC was retained at 150 °C, and the color rendering index was as high as 79.8. Furthermore, a 12 nm red shift and a 16.2 % increase of full width at half maximum were achieved owing to the synergistic effects of Tb³⁺ and Mn²⁺ ions. By combining TCs with a 460 nm blue chip, a warm white light with a low correlated color temperature of 4155 K was acquired. Meanwhile, the action mechanism of Tb³⁺ ion and the energy transfer between Ce³⁺ and Mn²⁺ ions were verified in prepared TCs.     

High efficiency synthesis of Nd:YAG powder by a spray co-precipitation method for transparent ceramics

A spray co-precipitation method was developed to efficiently synthesize Nd:YAG nano-powders. The effects of spray speeds and solution concentrations on the crystallization processes of calcined precursors have been studied. The results indicated that the pure phase of YAG could be obtained by three different crystallization processes owing to different homogeneity levels of Y and Al mixing. Pure YAG powder was obtained at 850?°C and the phase purity persisted to 1600?°C. Using the obtained powders, transparent ceramics with the in-line transmittance up to 80.2%@400 nm and 83.1%@1064?nm were fabricated by gel-casting method and hot isostatic pressing sintering. Furthermore, the microstructure and laser properties of the transparent ceramics have been measured. The maximum laser output of 7.015?W has been obtained with an oscillation threshold and a slope efficiency of 0.235?W and 59.4%, respectively.     

Viscoelastic behaviors and drying kinetics of different aqueous gelcasting systems for large Nd: YAG laser ceramics rods

Large and nondeforming Nd: YAG ceramic prepared by wet forming is of great importance as gain medium to obtain high-power solid-state lasers. However, it is difficult to achieve high-quality laser ceramics due to insufficiency of the in-depth understanding of transformation mechanism of gels viscoelasticity and effective control means during drying process. In this work, the rheological behaviors, viscoelastic characteristics, and mechanical strengths in classical acrylamide (AM) and novel Isobam (PIBM) gelcastings were systematically compared to explore the suitable route for the large-sized 2% Nd: YAG transparent ceramics with high aspect ratio (>10). AM system exhibited a higher complex viscosity (1.82 × 10⁵ Pa s), a shorter gel time (92.9 seconds), and a higher flexural strength (about 24.46 MPa) than PIBM system, and especially its ability to quickly gel was beneficial to the homogeneity of green body. In addition, the order of drying rates of wet gels in four drying media was observed as follows: 55℃ hot air> ethanol> solid desiccant> PEG-11000 and the moisture diffusion coefficients were calculated and simulated to offer the deep consideration of drying kinetics. The “ethanol + 55℃ hot air” was regarded as an effective composite drying method to eliminate defect and to achieve φ8 mm × 160 mm Nd: YAG ceramic with the in-line transmittance of 83% @1064 nm. Therefore, not only the cognition of gel process, but also the defects control strategy is proposed. More importantly, this work greatly promotes the application of wet forming and laser ceramics in high-power lasers.     

高能球磨Al2O3-Y2O3粉体混合物的研究

为了合成Y3Al5O12(YAG),对Al2O3-Y2O3粉体混合物进行了高能球磨研究。研究表明球磨后的粉体XRD衍射峰明显,并非无定形态,球磨后粉体中的Al2O3、Y2O3达到纳米级别尺寸后,随着晶粒尺寸的减少而晶格畸变增加,且烧结成的YAG粉体与Al2O3、Y2O3粉体有相似的晶格变化趋势。     

连续侧面泵浦Nd:YAG陶瓷激光器被动调Q研究

对比研究了808 nm激光二极管列阵侧面泵浦Nd∶YAG陶瓷与Nd∶YAG单晶激光器在连续和被动调Q运转下的激光输出特性。对于Nd∶YAG陶瓷激光器,在145 W泵浦功率,平平谐振腔20%输出耦合镜透过率时,获得最大44.28 W的1 064 nm连续激光输出,光-光转化效率和斜效率分别为30.5%和38.2%. 谐振腔中插入初始透过率87.89%的Cr⁴⁺∶YAG晶体作为被动调Q开关,在124 W泵浦功率下获得10.03 kHz重复频率,4.62 W平均功率,5.54 kW峰值功率的准连续激光输出。同样实验条件下利用相同尺寸和掺杂浓度的Nd∶YAG单晶进行对比,结果表明Nd∶YAG陶瓷在高功率泵浦下具有广阔的应用前景。     

Novel oxide fiber composites by freeze casting

A freeze casting process with gelatine as gelling agent is presented to manufacture novel oxide fiber composites. The growth of ice crystals causes an in situ densification of the green matrix when the composite is frozen after the lamination of 2D-fabrics. This freeze casting process leads to a porous matrix with a cellular morphology, showing no shrinkage during sintering. The porous structure is suitable for a subsequent infiltration with a precursor to densify the matrix. As the matrix is crack-free, the sintered composites have high mechanical properties. The processing is demonstrated by manufacturing laminated Nextel™610/YAG-ZrO₂ oxide fiber composites.