水力空化改质对重质原油沥青质及性质的影响

利用水力空化过程产生局部的高温、高压、高射流以及强大的剪切力等极端化学物理条件改质处理沙特重质原油，试验结果表明：沙特重质原油经过水力空化改质后粘度由13.61降低至7.22mm2/s，残碳由7.16%降低至6.48%，实沸点蒸馏后减压渣油降低1个百分点。进一步采用APPI FT-IR MS、XRD、FT-IR、SEM和粒度分布等技术研究了水力空化改质对沙重原油分子组成，沥青质团聚体微晶结构、沥青质胶束粒径分布、沥青质官能团、沥青质形貌等方面的影响，从分子角度阐述空化改质重油的机理。研究结果表明：水力空化改质后沙重原油分子量分布、芳烃类化合物缔合作用变小；沥青质对低DBE化合物吸附性能降低；沥青质团聚体微晶结构更加松散；沥青质胶束粒度分布降低；沥青质分子相互团聚作用力减弱。进一步考察了水力空化改质前后减压渣油延迟焦化性能，改质处理后焦炭产率降低1.85个百分点，液体收率和气体产率分别增加1.52和0.33个百分点，水力空化改质对沥青质性质、结构特点的改善能够有效的提高其加工性能。     

Novel measurement system for respiratory aerosols and droplets in indoor environments

The SARS-CoV-2 pandemic has created a great demand for a better understanding of the spread of viruses in indoor environments. A novel measurement system consisting of one portable aerosol-emitting mannequin (emitter) and a number of portable aerosol-absorbing mannequins (recipients) was developed that can measure the spread of aerosols and droplets that potentially contain infectious viruses. The emission of the virus from a human is simulated by using tracer particles solved in water. The recipients inhale the aerosols and droplets and quantify the level of solved tracer particles in their artificial lungs simultaneously over time. The mobile system can be arranged in a large variety of spreading scenarios in indoor environments and allows for quantification of the infection probability due to airborne virus spreading. This study shows the accuracy of the new measurement system and its ability to compare aerosol reduction measures such as regular ventilation or the use of a room air purifier.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Real-time molecular characterization of air pollutants in a Hong Kong residence: Implication of indoor source emissions and heterogeneous chemistry

Due to the high health risks associated with indoor air pollutants and long-term exposure, indoor air quality has received increasing attention. In this study, we put emphasis on the molecular composition, source emissions, and chemical aging of air pollutants in a residence with designed activities mimicking ordinary Hong Kong homes. More than 150 air pollutants were detected at molecular level, 87 of which were quantified at a time resolution of not less than 1 hour. The indoor-to-outdoor ratios were higher than 1 for most of the primary air pollutants, due to emissions of indoor activities and indoor backgrounds (especially for aldehydes). In contrast, many secondary air pollutants exhibited higher concentrations in outdoor air. Painting ranked first in aldehyde emissions, which also caused great enhancement of aromatics. Incense burning had the highest emissions of particle-phase organics, with vanillic acid and syringic acid as markers. The other noteworthy fingerprints enabled by online measurements included linoleic acid, cholesterol, and oleic acid for cooking, 2,5-dimethylfuran, stigmasterol, iso-/anteiso-alkanes, and fructose isomers for smoking, C₂₈-C₃₄ even n-alkanes for candle burning, and monoterpenes for the use of air freshener, cleaning agents, and camphor oil. We showed clear evidence of chemical aging of cooking emissions, giving a hint of indoor heterogeneous chemistry. This study highlights the value of organic molecules measured at high time resolutions in enhancing our knowledge on indoor air quality.     

上升气泡内气溶胶沉降机理研究

气溶胶池洗过滤是反应堆严重事故中去除放射性源项的重要手段。本文以严重事故条件下上升气泡中气溶胶的滞留过程为背景，设计搭建了可视化单气泡鼓泡实验装置。通过该装置研究了气溶胶在上升气泡中的沉降效率，并与MELCOR中的气溶胶沉降模型计算结果进行了对比。结果表明，气溶胶沉降效率对气泡尺寸的变化较为敏感，当气体流量大于0.1 L/min时，气泡等效直径迅速增加，相应的气溶胶沉降效率快速降低；与MELCOR模型计算结果的对比表明，两者在总体趋势上呈现出较好的一致性，但计算结果低估了液相对气溶胶的实际去除能力，导致这种偏差的主要原因是气泡在上升过程中存在无规则的晃动以及气液界面的波动。     

The social profitability of rural roads in a small open economy: Do urban agglomeration economies matter?

The effects of a rural roads programme depend on labour mobility, how the programme is financed, and agglomeration economies. If financed by a rural poll tax and cross-price effects and agglomeration economies are sufficiently small, the wage will rise, with some return migration. Taxes on trade act as countervailing distortions, yielding urban households some relief. Rural-urban commuting promotes the exploitation of agglomeration economies; taxes on international trade are then inferior to a poll tax. The change in the value, at producer prices, of the rural sector's net supply vector can be a poor measure of the programme's social profitability.     

Experimental investigation of far-field human cough airflows from healthy and influenza-infected subjects

Seasonal influenza epidemics have been responsible for causing increased economic expenditures and many deaths worldwide. Evidence exists to support the claim that the virus can be spread through the air, but the relative significance of airborne transmission has not been well defined. Particle image velocimetry (PIV) and hot-wire anemometry (HWA) measurements were conducted at 1 m away from the mouth of human subjects to develop a model for cough flow behavior at greater distances from the mouth than were studied previously. Biological aerosol sampling was conducted to assess the risk of exposure to airborne viruses. Throughout the investigation, 77 experiments were conducted from 58 different subjects. From these subjects, 21 presented with influenza-like illness. Of these, 12 subjects had laboratory-confirmed respiratory infections. A model was developed for the cough centerline velocity magnitude time history. The experimental results were also used to validate computational fluid dynamics (CFD) models. The peak velocity observed at the cough jet center, averaged across all trials, was 1.2 m/s, and an average jet spread angle of θ = 24° was measured, similar to that of a steady free jet. No differences were observed in the velocity or turbulence characteristics between coughs from sick, convalescent, or healthy participants.     

豆粕出库结块问题解决办法

储存在仓库中的豆粕,受外部环境以及豆粕水分的影响,易产生结块。结块豆粕若不经过处理直接出库,会影响产品质量。为此,对豆粕出库工艺流程进行了优化,并对生产线进行了改造。实践表明,通过在出仓发货提升机通往刮板机的连接溜管后增加刀片式粉碎机和筛网、漏斗,可以有效解决豆粕出库结块问题。     

亲油型聚结滤芯饱和度预测模型研究

纤维聚结滤芯广泛用于压缩空气净化、发动机曲轴箱通风、加工和切割等一系列工艺过程中，用于除去气流中的液体气溶胶颗粒。由于聚结滤芯饱和度对于过滤效率及阻力具有重要影响，因此建立饱和度与滤材参数及操作条件之间的关系将有助于优化滤芯结构并提高过滤性能。目前实际工业用聚结滤芯通常由多层微米级玻璃纤维材料组成，然而现有计算模型无法用于此类滤芯的饱和度预测。因此，本文基于多种常用亲油型聚结滤芯压降及饱和度实验测试结果，根据“跳跃-通道”模型及毛细管理论建立了新的饱和度预测模型。通过与大量已发表文献数据对比发现，当饱和值大于0.2时，预测值与实验结果吻合度较好，相对偏差≤20%。随着饱和度的降低，滤芯润湿区域和非润湿区域之间界限逐渐明显，此时无需对毛细管半径进行修正。然而，新模型仍然要依靠压降测量值进行计算，这一问题需在后续工作中加以解决。     

The co-location of innovation and production in clusters

ABSTRACT

This paper quantifies the extent of co-location of innovation and production for industry clusters with varying knowledge intensity. If input-output, knowledge, and skill linkages are interdependent and geographically bounded, then we would expect innovation and production to be co-located in regional clusters. However, theory predicts that the degree of agglomeration benefits associated with co-location may vary across economic activities with different knowledge intensity. Using data from the U.S. Cluster Mapping Project, I develop measures of the co-location of innovation and production for 27 industry clusters, examining patterns across regions and over time (1998–2015) in the United States. I find that there is a significant co-location of innovation and production for many clusters, especially for those with higher knowledge intensity. This paper focuses on the Information Technology and Analytical Instruments cluster and the Automotive cluster to illustrate the co-location measures and the micro-geography of innovation and production.