Influence of CO2 inleakage on the slight-alkalization of generator internal cooling water

The slight-alkalization of generator internal cooling water (GICW) is widely used to inhibit the corrosion of hollow copper conductor and thereby ensure the safe operation of the generator. CO₂ inleakage is increasingly identified as a potential security risk for GICW system. In this paper, the influence of CO₂ inleakage on the slight-alkalization of GICW was theoretically discussed. Based on the equilibriums of the CO₂-NaOH-H₂O system, CO₂ inleakage saturation was derived to quantify the amount of the dissolved CO₂ in GICW. This parameter can be directly calculated with the measured conductivity and the [Na⁺] of GICW. The influence of CO₂ inleakage on the slight-alkalization conditioning of GICW and the measurement of its water quality parameters were then analyzed. The more severe the inleakage, the narrower the water quality operation ranges of GICW, resulting in the more difficult the slight-alkalization conditioning of GICW. The temperature calibrations of the conductivity and the pH value of GICW show non-linear correlations with the amount of CO₂ inleakage and the NaOH dosage. This study provides insights into the influence of CO₂ inleakage on the slight-alkalization of GICW, which can serve as the theoretical basis for the actual slight-alkalization when CO₂ inleakage occurs.     

Fabrication of oxide-based near infrared-shielding coatings for a smart window to prevent infrared-induced photoaging in human skin

Oxide-based near infrared (IR)-shielding coatings consisting of quarter‐wave stacks of oxygen-deficient tantalum oxide (Ta₂O_5?x) and silicon oxide (SiO₂) multilayers and tin-doped indium oxide (In₂O₃) (ITO) films with the thicknesses of 200–600 nm can block the passage of IR-A (wavelength: 760–1400 nm) and IR-B (wavelength: 1400–3000 nm) radiation, respectively. In this study, the optical properties and microstructure of these oxide-based IR-shielding coatings were investigated. Transmission electron microscopy images indicated that amorphous Ta₂O_5?x/amorphous SiO₂ multilayers were uniform and dense. ITO films were found to be highly crystalline and show carrier concentrations of up to 7.1 × 10²⁰ cm^?3, resulting in the strong IR-B optical absorption due to the plasma excitation of the free carriers. Oxide-based IR-shielding coatings with an ITO thickness of 420 nm were found to have near-IR shielding rates of >90% and an average visible light transmittance of >70%. The effects of IR on human keratinocytes were studied to evaluate the IR-induced photoaging in human skin. It was found that the downregulation of cellular proliferation and the enhancement of senescence-associated β-galactosidase activity induced by IR irradiation were significantly inhibited by oxide-based IR-shielding coatings. Thus, this study provides a facile method for the development of coatings for smart windows with high IR-shielding ability and high visible light transmittance.     

Ion migration behavior and its interaction with sintering environment in cation conductor during flash sintering

Flash sintering has been reported in various ceramics. Nevertheless, anion and cation conductors exhibit different flash-sintering behaviors, and the interaction mechanism between the conductive species and the sintering environment has remained unclear. Herein, we report the flash-sintering phenomena of a typical cation conductor, Na₃Zr₂(SiO₄)₂(PO₄) with anode region surrounded by air and NaNO₃ environments. The results prove that the ionic behavior and joule heating distribution can be controlled by changing the electrode environment. Four possible scenarios describing the ion migration behavior and interaction with the environment are proposed for providing a guidance for controlling the ion interaction behavior during flash sintering.     

Preparation and electrical conductivity of KTaO3-based proton conductor

KTaO₃ and KTa_0.9M_0.1O_3-α (M = Ti, Hf, Zr) were prepared by solid state reaction at 1330 °C for 2 h and characterized by x-ray diffraction. The AC impedance technique was used to analyze the sintered solid electrolytes in 1%H₂/Ar and dry air atmosphere. Among KTa_0.9M_0.1O_3-α (M = Ti, Hf, Zr), KTa_0.9Zr_0.1O_3-α displays the highest conductivity in 1%H₂/Ar atmosphere. The carriers transport numbers of solid electrolytes were measured by concentration cell method. The results show KTa_0.9Zr_0.1O_3-α is a pure proton conductor below 525 °C. Stability tests show that KTa_0.9Zr_0.1O_3-α has good chemical stability against CO₂ and H₂O.     

Fabrication of BSCF-based mixed ionic-electronic conducting membrane by electrophoretic deposition for oxygen separation application

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF), which exhibits a high mixed oxide ionic-electronic conduction, was used for the fabrication of an oxygen separation membrane. An asymmetric structure, which was a thin and dense BSCF membrane layer supported on a porous BSCF substrate, was fabricated by the electrophoretic deposition method (EPD). Porous BSCF supports were prepared by the uniaxial pressing method using a powder mixture with BSCF and starch as the pore-forming agent (0–50 wt.%). The sintering behaviors of the porous support and the thin layer were separately characterized by dilatometry to determine the co-fired temperature at which cracking did not occur. A crack-free and thin dense membrane layer, which had about a 15 μm thickness and >95% relative density, was obtained after optimizing the processes of EPD and sintering. The dense/porous interface was well-bonded and the oxygen permeation flux was 2.5 ml (STP) min⁻¹ cm^-2 at 850 °C.     

Preparation of biaxially textured Ce1-x(Y0.2Zr0.8)xOδ buffer layers on RABiTS NiW tapes by chemical solution deposition

Highly (100)-oriented Ce_1-x(Y_0.2Zr_0.8)_xO_δ (CYZO) films were prepared on biaxially textured NiW substrates by a chemical solution deposition approach using metal inorganic salts as starting materials. It has been found that both the preferential orientation and surface roughness of CYZO films decrease gradually with increasing of the doping percentage of Y³⁺ and Zr⁴⁺ ions. The epitaxial growth relationship of (220)_CYZO//(200)_NiW and [00?l]_CYZO//[001]_NiW was demonstrated by XRD texture measurement as well as atomic resolution STEM observation. XRD, Raman and XPS spectra results indicate that Y³⁺ and Zr⁴⁺ ions were indeed introduced into CeO₂ lattice to substitute Ce⁴⁺ ions and form cubic fluorite CYZO solid solution. Moreover, CeO₂ buffer layer can be endowed a strong enough capability to prevent element diffusion through co-doping of yttrium and zirconium, provided that an optimal doping ratio of them is adopted. This will provide a new approach to fabricating strong-barrier single buffer layer for coated conductor.     

Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications

A composite cathode exhibits low activation polarisation by spreading its electrochemically active area within its volume. Composite cathodes enable the development of high-performance electrodes for solid oxide fuel cells (SOFCs) at intermediate temperatures (600 °C – 800 °C) because of their significant role in determining the kinetics of oxygen reduction reaction (ORR). Few anions O²⁻ are transferred through the electrolyte component when the ORR is low, thereby lowering the reaction with cation H⁺ from an anode side to transfer electrons along the outer circuit to the cathode side to participate in ORR. The resistance to the ORR at the cathode is minimised, thereby contributing to performance degradation and efficiency loss in existing SOFCs, especially at intermediate temperatures. The suitability and compatibility of the cathode and electrolyte are crucial in the development of cathodes and electrochemical reactions. The intercomponent compatibility is important to ensure the robustness and durability of SOFCs, especially at an operating temperature around 800 °C, at which the components experience extreme thermal and mechanical stresses. Composite cathodes are used to improve cathode performance. These composite cathodes help enhance the properties of mixed electronic–ionic conductors and the intercomponent compatibility. Herein, we reviewed historical data of composite-cathode development for SOFCs, including its basic principle and criteria. The overall performance of as-synthesised composite cathodes in terms of microstructure, electrochemical reaction and intercomponent compatibility is briefly discussed.     

Enhancing the flash-sinterability of BaZr0.1Ce0.7Y0.2O3-δ proton-conducting electrolyte by nickel oxide doping for possible application in SOFCs

In the present work, effects of nickel oxide doping on flash-sinterability of BaZr_0.1Ce_0.7Y_0.2O_3-δ compound were investigated. A single-phase BZCY7 powder was synthesized by the solid-state reaction route. The effects of using 0.5, 1, 1.5, and 2 wt% of NiO additive on flash sintering of BZCY7 samples were examined. It was revealed that using 0.5 wt% of NiO additive can reduce the onset temperature of flash sintering in all the applied electric fields in the range of 100–500 V/cm and significantly enhances the sinterability of the BZCY7 compound. Microstructural investigations, using field emission scanning electron microscopy and energy-dispersive X-ray mapping, showed that NiO doping can lead to larger grain sizes, while no detectable segregation or second phase was observed. Utilizing electrochemical impedance spectroscopy, the total conductivity of samples at 600 and 700 °C was measured as 4.4 × 10^?3 and 7.0 × 10^?3 S/cm for the undoped BZCY7, and 8.6 × 10^?3 and 1.4 × 10^?2 S/cm for the 0.5 wt% NiO doped BZCY7 sample, respectively. The activation energies of conduction were determined as 0.37 and 0.41 eV for the doped and undoped samples, which represent the presence of predominant and facile protonic conduction.     

Preparation and properties of lithium sulfonated polyoxadiazoles electrolyte

以硫酸肼（HS）、对苯二甲酸（TPA）、4，4'-联苯醚二甲酸（DPE）为单体，发烟硫酸做溶剂和脱水剂一步合成了一系列不同TPA和DPE单体配比的磺化聚芳噁二唑（SPOD），再通过氢氧化锂中和得到聚芳噁二唑磺酸锂（Li-SPOD）聚合物电解质，采用浇铸成膜法制得Li-SPOD电解质膜，研究改变TPA和DPE两种单体配比对Li-SPOD结构及性能的影响。结果表明，几种不同单体配比均能实现在聚合过程中一步得到SPOD，磺酸基团接枝在DPE结构的苯环上，并且可以达到理论接枝量；同时Li-SPOD电解质膜的聚集态结构差异很小；热性能的表现均非常优异，初始热分解温度都在450 ℃以上；力学性能随DPE单体含量的增加稍有下降但依然保持在较高的水平；电导率约为10^-5S/cm级别，随DPE含量增加而逐渐降低；Li-SPOD固态电解质电化学稳定性较好，对锂稳定电化学窗口均在4.0 V以上。     

Validating the efficiency of γ-Al2O3/La0.6Sr0.4Co0.2Fe0.8O3-δ double-layer electrolyte for low temperature solid oxide fuel cell

Perovskite La_0.6Sr_0.4Co_0.2Fe_0.8O_3+δ (LSCF) as a promising cathode material possessed overwhelming electronic conduction along with certain ionic conductivity. Its strong electron conduction capability hinder the application of pure-phase LSCF as electrolyte in semiconductor membrane fuel cell (SMFC). In order to constrain the electron transport and take advantage of the decent ion conduction of LSCF, a thin layer of γ-Al₂O₃ with insulating property was added as an electron barrier layer and combine with LSCF to form a two-layer structure electrolyte. Through adjusting the weight ratio of LSCF/γ-Al₂O₃ to optimize the thickness of double layers, an open circuit voltage of 0.98 V and a maximum power density of 690 mW/cm² was received at 550 °C. At the same time, SEM, EIS and other characterization technology had proven that the LSCF/γ-Al₂O₃ bi-layer electrolyte can work efficiently at low temperature. The advantage of this work is the application of double-layer (γ-Al₂O₃/LSCF) structure electrolyte to instead of mixed material electrolyte in low-temperature solid oxide fuel cells. Structural innovation and the using of insulating materials provided clues for the further development of SMFC.