机械合金化FeS/Cu复合材料的摩擦磨损性能

以FeS和CuSn8Ni1粉末为原料，利用机械合金化技术和粉末冶金技术制备了FeS/Cu复合材料，探讨了不同载荷情况下所制备的FeS/Cu复合材料的摩擦学性能及润滑膜与转移膜特征。结果表明：机械合金化提高了FeS与铜合金基体界面结合性能，进而提高了材料减摩耐磨性能；当载荷较小时，摩擦副表面接触不稳定，复合转移膜不连续，摩擦因数波动大；载荷较大时，复合转移膜易破损，材料的减摩耐磨性能变差；当载荷为150 N时，载荷适宜，材料表面软化，复合转移膜更加完整，摩擦因数较小。     

Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Influence of lanthanum on enhancement of mechanical and electrical properties of Cu-Al_2O_3 composites

Two kinds of Cu-Al_2O_3 composites(with and without La) were prepared via mechanical alloying-spark plasma sintering(MA-SPS) method. Microstructure, mechanical properties and electrical resistivity were investigated systematically using metallography, scanning electron microscopy, transmission electron microscopy, mechanical and electrical properties testing. The results indicate that an appropriate amount of La can homogenize the distribution of Al_2O_3. As such, yield strength, ultimate tensile strength and elongation of Cu-Al_2O_3-La are greatly increased. Some semi-coherent interface between Cu and Al_2O_3 is found, which means a low interface energy. The grain shape of Cu changes to irregular band with the addition of La. This change results in a density decrease of grain boundary and reduces electrical resistance. Lanthanum may exist in the form of La_2O_3.     

熔融制样-X射线荧光光谱法测定硅质、铝质、镁质和铬质耐火材料中15种组分

硅质、铝质、镁质和铬质耐火材料中MgO、Na₂O、Fe₂O₃、MnO、Cr₂O₃、TiO₂、P₂O₅、SiO₂、CaO、K₂O、Al₂O₃等组分含量的分析,一般采用EDTA滴定法、分光光度法、原子吸收光谱法测定,操作繁琐,耗时长;而使用X射线荧光光谱法分析时,4种基体的耐火材料需要采用不同的熔融方法和校准曲线。为了将4种基体的耐火材料统一制样方法,并使用同一组校准曲线同时测定MgO、ZrO₂、Na₂O、ZnO、NiO、Fe₂O₃、MnO、Cr₂O₃、V₂O₅、TiO₂、P₂O₅、SiO₂、CaO、K₂O、Al₂O₃等主次组分,实验选用3套国外耐火材料标准样品,并对熔融温度、时间、稀释比等熔融制样条件进行优化;通过峰位及强度扫描确定各元素电压、电流、准直器等条件,达到灵敏度与分辨率最佳,通过扫描PHA确定脉冲宽度,提高准确度。理论α系数校正元素间吸收增强效应,用比例法计算校正谱线重叠,优化校准曲线,提高分析方法准确度。各组分校准曲线线性相关系数R²在0.9940~0.9999之间。按照实验方法熔融JRRM507、JRRM803、JRRM129 3个标准样品,进行方法精密度和熔片精密度试验,结果表明重复性均能达到GB/T 21114—2007要求。按照实验方法选择镁铬矿、高岭土、铝土矿3类标准物质进行正确度验证,VS P14/3、UNS KK、ZBK394标准物质中MgO、ZrO₂、Na₂O、ZnO、NiO、Fe₂O₃、MnO、Cr₂O₃、V₂O₅、TiO₂、P₂O₅、SiO₂、CaO、K₂O、Al₂O₃等主次组分的测定结果与认定值相吻合。     

熔融制样-能量色散X射线荧光光谱仪分析硅酸盐中32 种组分

为充分发挥小型实验室设备的功能,实验采用熔融制样,使用台式能量色散X射线荧光光谱仪(10W, Rh靶)定量分析了硅酸盐样品中的Na₂O、MgO、Al₂O₃、SiO₂、P₂O₅、SO₃、Cl、K₂O、CaO、TiO₂、V、Cr、MnO、Fe₂O₃、Co、Ni、Cu、Zn、Ga、Rb、Sr、Y、Zr、Nb、As、Ba、La、Ce、Th、U、Hf、Pb等32种主、次、痕量组分。对3种不同的解谱方法进行比较,确定Na、Mg、Al、Si、P、As、Ce、Cr、Cu、Ga、La、Nb、Ni、Pb、Th、U、V、Y选择感兴趣区解谱,其余元素用高斯或经改进的高斯函数的最小二乘法拟合解谱。选用有代表性的多个硅酸盐类样品,比较了理论检出限及10次重复测定计算3倍标准偏差得出的检出限,发现以3倍标准偏差作为检出限再取它们的平均值则更具代表性和使用意义。各组分的检出限为0.2~1740μg/g。精密度试验表明,各组分测定结果的相对标准偏差(RSD)为0.12%~10.5%(Na为轻元素,由于含量低,小能谱测定的精密度稍差);对两个土壤标准样品进行正确度验证,测定值与标准值一致。     

纳米结构9Cr-ODS钢的制备工艺

本文对利用雾化法直接制备出Y、Ti过饱和固溶的粉体合金,经短时机械合金化和热等静压成型制备纳米结构9Cr-ODS钢技术进行了研究.采用扫描电镜和X射线衍射研究雾化合金粉与短时球磨后雾化合金粉的形貌特征与组织的演化.通过高分辨透射电镜和电子背散射衍射研究热固化成型后ODS钢的微观组织.测试了雾化粉和球磨8 h合金粉热固化成型样品的应力-应变曲线.结果表明,用短时球磨雾化粉制备的ODS钢晶粒尺寸更加细小、形成高密度纳米尺寸的析出相.与常规方法制备的ODS钢相比,抗拉强度略高、塑性显著提高、球磨时间大幅缩短.     

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

An equiatomic CoCrFeNiMn high-entropy alloy was synthesized by mechanical alloying (MA) and spark plasma sintering (SPS). During MA, a solid solution with refined microstructure of 10 nm which consists of a FCC phase and a BCC phase was formed. After SPS consolidation, only one FCC phase can be detected in the HEA bulks. The as-sintered bulks exhibit high compressive strength of 1987 MPa. An interesting magnetic transition associated with the structure coarsening and phase transformation was observed during SPS process.     

Chemical transesterification of flaxseed oil and medium-chain triacylglycerols: MLCT yield,DAG content,physicochemical properties,minor compounds and oxidation stability

A type of medium- and long-chain triacylglycerols (MLCT) rich in α-linolenic acid (ALA) was produced by chemical transesterification of medium-chain triacylglycerols (MCT) and flaxseed oils. Under the optimal substrate conditions of 60%, catalyst loading of 0.3% at 60 °C for 15 min, the product contained MLCT (74.06%), ALA (37.26%) and diacylglycerol (DAG) (11.25%). After that, changes in fatty acid (FA) composition, physicochemical properties and minor compounds after chemical transesterification (CTE) were investigated. The correlations analysis results of these factors on oxidative stability showed these factors could be divided into positive and negative groups. Although DAG appears to be beneficial in slowing down oil oxidation, it is critical to avoid its mass production because it would decrease MLCT.     

Effect of Cu addition on microstructural evolution and hardening of mechanically alloyed Al−Ti−O in-situ composite

The microstructure formation and strengthening of an Al−5wt.%TiO₂ composites with additions of 5 wt.% Cu and 2 wt.% stearic acid (as a process control agent, PCA) during mechanical alloying and subsequent thermal exposure were studied. The powder composites were prepared by high-energy ball milling for up to 10 h. Single line tracks of the powders were laser melted. Optical and scanning electron microscopy, XRD analysis and differential scanning calorimetry were used to study microstructural evolution. The results showed that the Cu addition promotes an effective mechanical alloying of aluminum with TiO₂ from the start of milling, resulting in higher microhardness (up to HV 290), while the PCA, on the contrary, postpones this process. In both cases, the composite granules with uniform distribution of TiO₂ particles were formed. Subsequent heating of mechanically alloyed materials causes the activation of an exothermic reaction of TiO₂ reduction with aluminum, the start temperature of which, in the case of Cu addition, shifts to lower values, that is, the transformation begins in the solid state. Besides, the Cu-added material after laser melting demonstrates a more dispersed and uniform structure which positively affects its microhardness.     

Effect of Cr on the hydrogen storage and electronic properties of BCC alloys: Experimental and first-principles study

Inventing an effective method to store large amounts of hydrogen at room temperature is one of the key challenges in developing a hydrogen-based economy. Metal hydrides have attracted attention owing to their promising hydrogen storage capabilities. We have systematically studied the structural and electronic properties of mechanically synthesized Ti_0.5V_1.5-xCr_x (0 ≤ x ≤ 0.3) alloys and investigated the influence of the addition of Cr atoms on the hydrogen storage properties of vanadium-rich body-centered-cubic (V-BCC) alloys. X-ray diffraction (XRD) results indicate that all alloys are composed of BCC main phase, with the lattice parameters exhibiting no change following chemical modification. The kinetic measurements have revealed that Cr-containing alloys exhibit improved hydrogen uptake. X-ray photoelectron spectroscopy (XPS) measurements have shown that the addition of Cr has a significant effect on the anti-oxidation properties of V-BCC alloys, increasing their chemical activity and thus enhancing the hydrogen storage properties. Moreover, XPS results elucidate the role of activation of the studied materials. Additionally, the electrochemical properties of the negative electrodes (as part of Ni-MH_x secondary batteries) made of Ti_0.5V_1.4-xNi_0.1Cr_x (0 ≤ x ≤ 0.3) system have been studied by cyclic charge-discharge and demonstrate that doping of the V-BCC alloys with Cr can significantly improve the cycle-life stability of anode that exhibits similar discharge performance up to 50 cycles. First principles simulations are used to analyse the changes in the electronic density of states close to the Fermi level, as a function of Cr concentration, as well as binding energies and structural changes upon hydrogen absorption. Furthermore, ab initio studies confirmed that H absorption is favoured with increasing Cr-content. Our study highlights the importance of the addition of Cr to V-BCC alloys on both solid-gas and electrochemical hydrogenation reactions.