首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   33684篇
  免费   2795篇
  国内免费   1498篇
电工技术   819篇
综合类   2192篇
化学工业   8303篇
金属工艺   3931篇
机械仪表   1345篇
建筑科学   2059篇
矿业工程   1485篇
能源动力   700篇
轻工业   3838篇
水利工程   506篇
石油天然气   758篇
武器工业   429篇
无线电   1238篇
一般工业技术   4942篇
冶金工业   4059篇
原子能技术   278篇
自动化技术   1095篇
  2024年   29篇
  2023年   552篇
  2022年   946篇
  2021年   1127篇
  2020年   1171篇
  2019年   948篇
  2018年   878篇
  2017年   1122篇
  2016年   1040篇
  2015年   1033篇
  2014年   1623篇
  2013年   1952篇
  2012年   2105篇
  2011年   2312篇
  2010年   1701篇
  2009年   1774篇
  2008年   1559篇
  2007年   2122篇
  2006年   2136篇
  2005年   1900篇
  2004年   1580篇
  2003年   1415篇
  2002年   1223篇
  2001年   993篇
  2000年   835篇
  1999年   751篇
  1998年   604篇
  1997年   508篇
  1996年   373篇
  1995年   326篇
  1994年   322篇
  1993年   235篇
  1992年   177篇
  1991年   113篇
  1990年   107篇
  1989年   92篇
  1988年   58篇
  1987年   40篇
  1986年   28篇
  1985年   26篇
  1984年   17篇
  1983年   15篇
  1982年   15篇
  1981年   18篇
  1980年   12篇
  1979年   6篇
  1978年   6篇
  1964年   7篇
  1959年   8篇
  1956年   5篇
排序方式: 共有10000条查询结果,搜索用时 15 毫秒
1.
为解决黄河冲积平原地区粉土粘聚力低、水稳定性差等工程应用问题,采用烧结法赤泥和基质沥青为主材制备粉土固化剂(RAC)对粉土进行综合稳定。按5%水泥优选掺量并附加0,2,4,6,8% RAC成型稳定粉土试件,经过标准养护、浸水软化、循环加热、低温冻融、高温自愈等特定试验条件后,进行3d、7d和28d龄期的抗压强度与压缩模量试验,对比分析不同掺量RAC稳定粉土路用性能的变化规律。采用扫描电镜(SEM)分别观察粉土、水泥稳定粉土和RAC稳定粉土的微观结构形貌和孔隙特征,进而探讨固化稳定机理。结合实体工程的应用实践对RAC稳定粉土的路用性能进行测试分析与验证。结果表明:与单掺水泥相比,RAC稳定粉土具有良好的力学性能,2,4,6,8%RAC稳定粉土标准养护3d强度分别提高110%,146%,156%,161%,28d龄期浸水强度损失率均小于20%;当RAC掺量高于4%时,循环加热5次以上可使稳定粉土的强度增长超过140%,低温冻融强度损失率小于15%;试件加载至90%极限荷载,循环加热5次后,2,4,6,8%RAC稳定粉土强度变化率分别是-8.3%,-2.3%,+8.0%,+12.9%。SEM图像显示RAC稳定使粉土形成密实的胶结凝聚体和均匀分布的孔径小于1μm非连通微孔结构,有利于稳定粉土水稳定性和抗冻性的提高;高温条件下沥青组分发生湿润粘结包裹粉土颗粒及水化产物,同时加速扩散填充内部孔隙和微裂缝,实现土体的损伤修复和结构补强。实体工程中RAC稳定粉土结构层取芯测试抗压强度为1.7MPa,压缩模量为1360MPa,路面弯沉为18~23(0.01mm),未出现裂缝、坑槽、松散等损坏现象。  相似文献   
2.
为研究雷达功率组件金刚石微通道热沉的加工难题,开展了飞秒激光加工多晶金刚石微流道的工艺研究,仿真模拟了飞秒激光作用于金刚石表面的温度场分布,以及诱导去除过程,理论与实验研究了金刚石的烧蚀阈值,系统研究了激光能量、扫描速度、扫描次数、焦点位置等参量及其优化工艺参数对金刚石微槽尺寸的影响规律。结果表明:当飞秒激光功率大于0.3 W时,激光作用于金刚石的最高温度超过材料去除的气化温度,温度最高位置处于光斑中心,功率不会改变温度场的分布情形;飞秒激光加工金刚石的烧蚀阈值为1.80 J/cm2,金刚石微槽深度与激光功率、扫描次数正相关,与扫描速度负相关,与正负离焦量基本成对称分布关系,而金刚石微槽表面宽度则变化不明显;在激光功率为5 W,扫描速度为100 mm/s,扫描次数为30,离焦量为-0.5 mm的优化参数下,加工出的金刚石微槽结构形状规则,截面侧壁锥度控制在3°以内,表面无残渣、裂纹、崩边等缺陷,且内部也无裂纹等缺陷,加工一致性较高,实现了微通道的 “冷”加工,可满足雷达功率组件金刚石热沉对微通道的高质量加工要求。  相似文献   
3.
Dense (~97%) CaO-stabilized ZrO2 ceramic was stabilized with minimum (3 mol%) doping (reported to date) and processed via conventional sintering at a low temperature (~1200°C); compositional analysis via X-ray florescence confirmed the CaO doping accuracy. Phase-pure tetragonal structure (characterized via both X-ray diffraction and Raman spectroscopy) along with uniform nanograins (90 nm) of the ceramic ensured the evolution of no monoclinic phase even after vigorous low-temperature degradation experiments (both thermal and hydrothermal aging for 80-100 h). The sintered ceramic recorded a high hardness (~15 GPa); the indentation toughness value was also comparable to a 3 mol% yttria-stabilized zirconia system. The remarkable structure–property correlations in the 3 mol% CaO-stabilized ZrO2 ceramic suggests that the same may be worth examining for suitable future applications (e.g., in dental ceramics).  相似文献   
4.
研究了复掺沸石粉和玻璃粉对混凝土抗压强度、干燥收缩、抗碳化和抗氯离子渗透性能的影响,并采用扫描电子显微镜(SEM)和压汞仪分析混凝土的微观结构。结果表明,复掺沸石粉和玻璃粉会降低混凝土的早期抗压强度和干燥收缩,后期能有效提高混凝土的抗压强度、抗碳化和抗氯离子渗透性能,其增强效果随沸石粉掺量提高而提高。复掺沸石粉和玻璃粉能提高混凝土的密实度,降低孔隙率,改善骨料与水泥基体的界面结构,从而提高混凝土的综合性能。  相似文献   
5.
采用Ti-Cu复合中间层扩散连接钨与CLAM钢,在30 MPa、1h和800~950℃的条件下,成功获得了W/Ti-Cu/CLAM钢接头。接头界面连接良好,中间层区域发现有Ti2Cu或TiCu4等金属间化合物产生。TiC脆硬层使得中间层/钢界面处的硬度远高于钢母材,同时造成了接头处钢母材的失C并软化现象。随焊接温度的升高,接头的剪切强度先升高后降低,在850℃时达到了274 MPa的最大值,剪切试样均断裂在W/中间层界面靠近钨侧处。  相似文献   
6.
To explain the intrinsic mechanism of the yield plateau phenomenon in commercially pure titanium, the tensile behaviors of commercially pure titanium specimens after 91.6% cryorolling and subsequent annealing at 280 ℃, 335 ℃, 450 ℃ and 600 ℃ have been studied. The results show that the yield plateau phenomenon is a result of dislocation behaviors controlled by grain size and thus only exists within a given range of mean grain size. α grain boundaries are the main dislocation multiplication sources of commercially pure titanium. Fine-grained microstructure could offer numerous dislocation multiplication locations during deformation. Once the applied stress is above the yielding strength, dislocations multiply rapidly and the mobile dislocation density is high. To retrieve the imposed strain rate, the mean dislocation velocity is bound to be low. Therefore, it takes time for them to interact with each other. As a result, the movement of dislocations is hardly blocked and the deformation could continue at a nearly constant applied stress. Consequently, the so-called yield plateau behavior presents in the tensile curves. The disappearance of yield plateau phenomenon in coarse-grained and ultrafi ne-grained microstructures is attributed to the quick realization of the mutual interactions among dislocations at the initial stage of tensile test.  相似文献   
7.
程文静  余林  程高  钟远红  郑成  毛桃嫣 《化工学报》2021,72(5):2837-2848
以1,3-二(3-缩水甘油醚丙基)-1,1,3,3-四甲基二硅氧烷(EDH)和八甲基环四硅氧烷(D4)为原料合成了端环氧硅油(ETSO),以ETSO为原料与葡甲胺胺化得到中间体有机硅嵌段硅油(PTSO),然后用γ-氯丙基三甲氧基硅烷(CPTSO)季铵化改性制备了Bola有机硅季铵盐(BPTSO)。BPTSO的季铵化过程最优合成工艺条件为:反应温度为80℃,物料摩尔比为n(PTSO)∶n(CPTSO)=1∶1.2,反应时间为3 h,PTSO转化率达98.60%。通过FT-IR、1H NMR、TGA、TEM对BPTSO的结构及BPTSO乳液整理后织物的微观形貌进行了表征。测试结果表明:BPTSO乳液的表面张力γ 为29.4 mN/m,临界胶束浓度CMC为0.036 mmol/L,具有囊泡结构和优越的稳定性,经BPTSO乳液整理后的棉织物具有优异的柔软度、白度及亲水性,当BPTSO乳液的用量为60 g/L时,对棉织物的增深率可达到46.5%。  相似文献   
8.
In this study, we report the three-point flexural strength and fracture toughness of monolithic hafnium carbide up to 2000 °C. HfC with different grain sizes was consolidated using the spark plasma sintering method. Coarse-grained monoliths showed a weak dependence on the strain rate during high-temperature tests at 1600 °C–2000 °C. In contrast, results for the ceramics with a grain size below 20 μm indicated a positive dependence of the yield strength vs strain rate. This allowed us to identify the activation energy for high-temperature deformation in flexure as 370 kJ/mol. This level of activation energy is in satisfactory agreement with reports about the diffusion of C in hafnium carbide.  相似文献   
9.
利用碱性电解水制备矿粉砂浆,研究了不同取代率矿粉对砂浆工作性和力学性能的影响,结合XRD分析,评价了利用碱性电解水激发矿粉的活性和改善矿粉砂浆性能的可行性。结果表明:碱性电解水矿粉砂浆的工作性和力学性能均优于自来水矿粉砂浆;当矿粉取代率为20%时,碱性电解水矿粉砂浆的28 d抗折强度和抗压强度较自来水矿粉砂浆分别提高了11.9%和23.5%;碱性电解水矿粉砂浆中存在多钙钾石膏和钾长石,且水化硅酸钙和铝酸钙矿物的衍射峰显著强于自来水矿粉砂浆。  相似文献   
10.
采用自主开发的旋转盘离心雾化实验装置进行雾化制备增材制造用铝合金粉末实验研究,通过开展雾化盘实验研究优选出粒度分布较均匀收得率较好的盘形,并获得其结构和工艺参数的影响规律;通过对制得的铝合金粉末性能和3D打印成型件物理性能进行检测。结果表明:离心雾化制备的铝合金粉末具有高流动性、窄粒度、高球形度、高松比,表面光洁无卫星粉,无空心粉等特点,同时3D打印离心雾化样件熔覆道均匀,孔洞缺陷少,致密度和力学性能明显优于气雾化样件,尤其是抗拉强度和屈服强达到495和320 MPa,相比气雾化粉打印样件提高近10%。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号