不同方法发酵的酸豆角品质对比分析

本文将研究不同方法发酵的酸豆角品质对比分析。选取质地嫩脆、条形均匀、无病虫害的新鲜豆角为泡制原料。采用自然干法发酵、自然湿法发酵与纯种湿法发酵的发酵方法制作酸豆角。检测发酵过程中，pH值、还原糖含量、总酸含量、总糖含量、亚硝酸盐含量以及氨基酸态氮含量，分析纯种湿法发酵与自然湿法发酵对酸豆角品质的影响。结果表明：纯种湿法发酵25 d后，其pH值和还原糖含量分别为3.92、0.03%，均高于自然湿法发酵；总酸、总糖、亚硝酸盐含量、氨基酸态氮含量分别为0.25%、0.04%、0.01 mg/kg和0.01%，均低于自然湿法发酵。另外，纯种湿法发酵酸豆角的甲氧基乙酸含量为0.37%，乙酸乙酯为0.51%，含水量为81.15%，感官评分为45.52，均高于自然干法发酵。纯种湿法发酵对酸豆角品质的效果最好，亚硝酸盐的含量在发酵后期显著降低，感官评分较高，对豆角工业化生产提供了较好的参考价值。     

红土镍矿冶金技术研究进展

如今世界经济迅猛发展,金属镍的需求量也在加速增长。人们主要从硫化镍矿和红土镍矿中提炼金属镍。然而硫化镍矿资源因大规模开发而不断减少,红土镍矿未来将成为镍的主要来源。因此研究红土镍矿的高效开发利用,是当今围绕镍资源研究的热点,对实际生产具有重要的现实意义。本文简要介绍了镍的应用、开发红土镍矿的意义、红土镍矿的矿物学特性、红土镍矿世界范围内的储量和分布,并且列举并分析了红土镍矿的各种冶炼工艺及其优点与不足,同时综述了有关红土镍矿研究的新方法,为红土镍矿高附加值综合利用研究提出思路。     

New empirical correlation for estimation of vaporization enthalpy of algerian saharan blend petroleum fractions

A Real-coded Genetic Algorithm has been used to develop a new correlation to estimate the enthalpy of vaporization for pure compounds and petroleum fractions as a function of the normal boiling point and specific gravity. In developing the correlation 80% of the data was used and the remaining are used for validation. The results of the proposed correlations are compared to others in literature. The comparison indicates that the proposed model is simple to use and more accurate than the most common correlations for predicting the enthalpy of vaporization of pure compounds and petroleum fractions.     

十二烷基硫酸钠修饰NiFe2O4对亚甲基蓝的类芬顿催化氧化性能

采用化学沉淀法制备了十二烷基硫酸钠（SDS）改性的纳米酸镍（记为NiFe₂O₄-S），利用X射线衍射（XRD）、红外光谱（FTIR）、能谱（EDS）、透射电镜（TEM）、BET比表面等技术手段对样品进行了表征。采用多相芬顿氧化技术，以亚甲基蓝溶液为模拟污染物废水，研究了SDS对铁酸镍的改性效果、亚甲基蓝溶液初始pH以及催化剂循环使用等不同条件因素对样品类芬顿催化活性的影响。结果显示，经SDS改性后的NiFe₂O₄-S比纯相NiFe₂O₄表现出了更优异的催化性能，NiFe₂O₄-S对酸性（pH=3.5）、近中性（pH=6.5）和碱性（pH=9.5）的亚甲基蓝溶液均有着较好的催化降解效果；NiFe₂O₄-S具有良好的催化稳定性和重复使用性。对该催化反应体系的作用机理进行了详细探讨，NiFe₂O₄-S表现出优异的类芬顿催化活性归因于更强的电子转移能力，吸附的SDS能促进H₂O₂和 \text{?} {\mathrm{O}}_{\mathrm{2}}^{\text{-}} 分别与表面Fe³⁺反应将其还原转化为Fe²⁺。·OH是直接分解亚甲基蓝的活性物种，反应中NiFe₂O₄-S表面较高浓度的Fe²⁺可以有效地把H₂O₂分解为·OH。SDS增强了催化剂表面对亚甲基蓝的吸附能力，促进了·OH与亚甲基蓝的分解反应。     

Adaptive neural network command filtered backstepping control of pure‐feedback systems in presence of full state constraints

An adaptive neural network (NN) command filtered backstepping control is proposed for the pure‐feedback system subjected to time‐varying output/stated constraints. By introducing a one‐to‐one nonlinear mapping, the obstacle caused by full stated constraints is conquered. The adaptive control law is constructed by command filtered backstepping technology and radial basis function NNs, where only one learning parameter needs to be updated online. The stability analysis via nonlinear small‐gain theorem shows that all the signals in closed‐loop system are semiglobal uniformly ultimately bounded. The simulation examples demonstrate the effectiveness of the proposed control scheme.     

Microstructural and Tribological Behavior of Pulse Electroplated Nickel Barrier on Copper Conductors

The microstructural, mechanical, and tribological behaviors of electroplated Ni on Cu conducting substrates have been investigated in this study. The microstructural studies were performed by X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). The results showed that initially (111) with (220), (200) Ni texture components were predominant in the coating, and increasing the current density from 0.1 to 0.5 A/cm² led to the development of a strong (111) texture. The presence of ultrafine grains coupled with a (111) Ni texture improved the coating microhardness and wear properties significantly. It was shown that with an increase in current density, wear resistance of the coatings improved significantly and the electrical resistivity increased due to the highly populated grain boundaries.     

汽车锁零部件碱性锌镍合金电镀工艺

介绍了汽车锁零部件碱性挂镀锌镍合金电镀生产线的开发过程,包括前期市场调研、中期小槽试验、后期成本核算、电镀工艺流程确定、废水处理工艺制定以及阳极膜应用可行性分析。     

对硝基苯胺水相加氢合成对苯二胺

以对硝基苯胺为原料,水为溶剂,考察了水相中负载型镍催化剂催化对硝基苯胺加氢还原的反应性能,并开展了中试实验。考察了反应温度、压力、保温时间、对硝基苯胺浓度、废水套用等因素对催化加氢反应性能的影响。实验结果表明,产品对苯二胺质量分数较高,催化剂和水可循环使用。得到较佳的工艺条件为:温度110℃,保温时间1 h,压力2.0 MPa,搅拌转速800 r/min,起始催化剂用量10%(以对硝基苯胺的质量为基准,下同),催化剂损耗0.2%(以起始添加催化剂的质量为基准)。在该工艺条件下,对苯二胺产率达99.5%以上。废水套用后排放废水量很少,且对催化剂催化活性、产品质量等没有影响。