Activin A and Cell-Surface GRP78 Are Novel Targetable RhoA Activators for Diabetic Kidney Disease

Diabetic kidney disease (DKD) is the leading cause of kidney failure. RhoA/Rho-associated protein kinase (ROCK) signaling is a recognized mediator of its pathogenesis, largely through mediating the profibrotic response. While RhoA activation is not feasible due to the central role it plays in normal physiology, ROCK inhibition has been found to be effective in attenuating DKD in preclinical models. However, this has not been evaluated in clinical studies as of yet. Alternate means of inhibiting RhoA/ROCK signaling involve the identification of disease-specific activators. This report presents evidence showing the activation of RhoA/ROCK signaling both in vitro in glomerular mesangial cells and in vivo in diabetic kidneys by two recently described novel pathogenic mediators of fibrosis in DKD, activins and cell-surface GRP78. Neither are present in normal kidneys. Activin inhibition with follistatin and neutralization of cell-surface GRP78 using a specific antibody blocked RhoA activation in mesangial cells and in diabetic kidneys. These data identify two novel RhoA/ROCK activators in diabetic kidneys that can be evaluated for their efficacy in inhibiting the progression of DKD.     

Embedded Metal Oxide Plasmonics Using Local Plasma Oxidation of AZO for Planar Metasurfaces

New methods for achieving high-quality conducting oxide metasurfaces are of great importance for a range of emerging applications from infrared thermal control coatings to epsilon-near-zero nonlinear optics. This work demonstrates the viability of plasma patterning as a technique to selectively and locally modulate the carrier density in planar Al-doped ZnO (AZO) metasurfaces without any associated topographical surface profile. This technique stands in strong contrast to conventional physical patterning which results in nonplanar textured surfaces. The approach can open up a new route to form novel photonic devices with planar metasurfaces, for example, antireflective coatings and multi-layer devices. To demonstrate the performance of the carrier-modulated AZO metasurfaces, two types of devices are realized using the demonstrated plasma patterning. A metasurface optical solar reflector is shown to produce infrared emissivity equivalent to a conventional etched design. Second, a multiband metasurface is achieved by integrating a Au visible-range metasurface on top of the planar AZO infrared metasurface. Independent control of spectral bands without significant cross-talk between infrared and visible functionalities is achieved. Local carrier tuning of conducting oxide films offers a conceptually new approach for oxide-based photonics and nanoelectronics and opens up new routes for integrated planar metasurfaces in optical technology.     

Lipid‐derived monoamide as phase change energy storage materials

One of the major shortcomings of current organic phase change materials (PCMs) is their relatively low melting points, typically below 80°C, which limits their integration into thermal energy storage (TES) systems. The present work was aimed at developing lipid‐derived PCMs with increased melting points which would be suitable for TES applications requiring higher melting points without compromising other key properties such as enthalpy. The introduction of an amide group into the structure of linear saturated fatty acids was used as a means to increase intermolecular interactions and therefore crystallization and melting points. A series of six linear monoamides with differing chain length and symmetry about the amide group were investigated for thermal stability, thermal transition, flow behavior, and crystal structure to establish the structure‐property relationships relevant to TES. The presence of the highly polar amide group in the aliphatic fatty acid–derived molecules resulted in notable improvement in performance compared with the analogous monofunctional molecules: Increases in melting points (79°C‐96°C) and high enthalpies of fusion (155‐201 J/g) were recorded. Fundamental relationships between structure, processing, and macroscopic physicochemical properties, never before elucidated, were revealed in the study. The study revealed a step‐like variation of macroscopic properties: a surprising outcome of the competition between intermolecular attractions, symmetry effects, and mass transfer limitations. The predictive structure‐function relationships established in this work will allow the straightforward engineering of monoamide architectures that can extend the range of organic PCMs and deliver thermal properties desirable for TES applications.     

Determination of the Optimal River Basin-Wide Agricultural Water Demand Quantities Meeting Satisfactory Reliability Levels

Water Resources Management - The unbridled increase in water demands and beyond-sustainable water withdrawals have led to decrease reliable supply levels, particularly for agricultural purposes in...     

Effects of treatment with low molecular weight phenol formaldehyde resin on the surface characteristics of oil palm (Elaeis quineensis) stem veneer

Even though oil palm (Elaeis quineensis) stem (OPS) is highly potential as an alternative raw material in wood industry, it possesses some inferior characteristics. One of the critical weaknesses is a high degree of veneer surface roughness that resulted in high resin consumption during plywood manufacture. The objective of this study was to investigate effects of treatment with low molecular weight phenol formaldehyde (LMWPF) resin on the wettability and surface roughness of OPS veneer. OPS veneers were segregated into two categories namely outer and inner layer veneer, prior to soaking in LMWPF resin solution to obtain weight percent gain of 16–20%. The wettability of OPS veneers was assessed with contact angle measurement according to the sessile drop method. The veneer surface roughness was evaluated by determining the average roughness (R_a), mean peak-to-valley height (R_z), and maximum roughness (R_max) using a stylus profilometer in accordance with DIN standard 4768. The results show that the effect of LMWPF resin treatment on the surface roughness of the veneers is statistically significant. The technique used in the study was able to enhance the surface properties as well as improved the physical and mechanical properties of OPS plywood.     

Performance Enhancement of Steel Columns Using Concrete-Filled Composite Jackets

This paper studies the cross-sectional behavior of steel columns strengthened with fiber-reinforced polymers (FRPs). The composite column is constructed by wrapping the steel I-section column with epoxy-saturated glass- and carbon-FRPs (GFRP and CFRP) sheets in the transverse direction and subsequently filling the voids between the FRP and the steel with concrete. Experimental tests were performed on stub columns under axial compression including one to three CFRP wraps. A corner treatment technique, to avoid stress concentration at the corners and to improve confinement efficiency, was also investigated. A simplified analytical model was developed to predict the axial behavior of the composite columns. Experimental results showed significant enhancement in the behavior of the composite columns primarily attributable to the confinement mechanism imposed by the FRP jacket and concrete. Increasing the corner radius resulted in higher compressive strength of the confined concrete and ultimate axial strain of the composite columns. Good agreement between the analytically developed axial load-displacement relationships and the test data indicates that the model can closely simulate the cross-sectional behavior of the composite columns.     

The effect of diluent on flame structure and laminar burning speeds of JP-8/oxidizer/diluent premixed flames

Experimental studies have been performed to investigate the flame structure and laminar burning speed of JP-8/oxidizer/diluent premixed flames at high temperatures and pressures. Three different diluents including argon, helium, and a mixture of 14% CO₂ and 86% N₂ (extra diluent gases), were used. The experiments were carried out in two constant volume spherical and cylindrical vessels. Laminar burning speeds were measured using a thermodynamics model based on the pressure rise method. Temperatures from 493 to 700 K and pressures from 1 to 11.5 atm were investigated. Extra diluent gases (EDG) decrease the laminar burning speeds but do not greatly impact the stability of the flame compared to JP-8/air. Replacing nitrogen in the air with argon and helium increases the range of temperature and pressure in the experiments. Helium as a diluent also increases the temperature and pressure range of stable flame as well as the laminar burning speed. Power law correlations have been developed for laminar burning speeds of JP-8/air/EDG and JP-8/oxygen/helium mixtures at a temperature range of 493-700 K and a pressure range of 1-10 atm for lean mixtures.