Highly enhanced energy storage properties of H2O2-hydroxylated rare earth ferrites (LaFeO3 and GdFeO3) nanofillers in poly(vinylidene fluoride)-based nanocomposite films

Journal of Materials Science: Materials in Electronics - Pure PVDF has higher breakdown strength but low dielectric and ferroelectric properties. Thus, we synthesized the LaFeO3 and GdFeO3...     

Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms,kinetics and statistical error analysis

In the present study we made an effort to deploy eco-friendly synthesized reduced graphene oxide/Lanthanum Alluminate nanocomposites (RGO-LaAlO₃) and Lanthanum Alluminate (LaAlO₃) as adsorbents to remove dye from the synthetic media. XRD, SEM, BET surface area and EDX have been used to characterize the above-mentioned adsorbents. The impacts of different factors like adsorbent dosage, the concentration of adsorbate and PH on adsorption were studied. The best fit linear and nonlinear equations for the adsorption isotherms and kinetic models had been examined. The sum of the normalized errors and the coefficient of determination were used to determine the best fit model. The experimental data were more aptly fitted for nonlinear forms of isotherms and kinetic equations. Pseudo-second-order and Freundlich isotherm model fits the equilibrium data satisfactorily. Methyl orange (MO) has been used as model dye pollutant and maximum adsorption capacity was found to be 469.7 and 702.2 mg g^?1 for LaAlO₃ and RGO-LaAlO₃, respectively.     

Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

Identifying crop water stress using deep learning models

Neural Computing and Applications - The identification of water stress is a major challenge for timely and effective irrigation to ensure global food security and sustainable agriculture. Several...     

A Novel Self-Organizing Approach to Automatic Traffic Light Management System for Road Traffic Network

Wireless Personal Communications - Traffic network is basically a “network of networks” consisting of mainly two types of networks: road network and a travel network. Due to drastic...     

Investigating the effect of silver nanorods embedded in polydimethylsiloxane matrix using nanoindentation and its use for flexible electronics

The stretchable electrodes with excellent flexibility, electrical conductivity, and mechanical durability are the most fundamental components in the emerging and exciting field of flexible electronics. This article proposes a method for fabrication of such a stretchable electrode by embedding silver nanorods (AgNRs) into a polydimethylsiloxane (PDMS) matrix that is grown by a unique glancing angle deposition technique. The surface, mechanical, and electrical properties of PDMS are significantly changed after embedding the AgNRs in it. The results show that surface roughness and polarity increase after AgNRs are embedded in the PDMS matrix. Elastic modulus (E) and hardness (H) decrease with an increase in the indentation load as a result of the indentation depth effect. Due to strong interfacial adhesion of AgNRs embedded in the PDMS matrix, the E and H of nanocomposite are increased by 167.6 and 93.3% compared with PDMS film, respectively. Furthermore, the AgNRs-PDMS film has an electrical resistivity value in the order of 10⁻⁷ Ωm. It remains conductive during various mechanical strains such as bending, twisting, and stretching, which is demonstrated using a light-emitting diode circuit. Simultaneously, the antimicrobial activity of silver could make it a promising candidate for wearable electronics.     

Interplay of reactive oxygen species (ROS) and tissue engineering: a review on clinical aspects of ROS-responsive biomaterials

Reactive oxygen species (ROS) refers to the reactive molecules and free radicals of oxygen generated as the by-products of aerobic respiration. Historically, ROS are known as stress markers that are linked to the response of immune cell against microbial invasion, but recent discoveries suggest their role as secondary messengers in signal transduction and cell cycle. Tissue engineering (TE) techniques have the capabilities to harness such properties of ROS for the effective regeneration of damaged tissues. TE employs stem cells and biomaterial matrix, to heal and regenerate injured tissue and organ. During regeneration, one of the constraints is the unavailability of oxygen as proper vasculature is absent at the injured site. This creates hypoxic conditions at the site of regeneration. Hence, effective response against the stresses like hypoxia spurs the regeneration process. Contrary, hyperoxic condition may increase the risk of ROS stress at the site. TE tries to overcome these limitations with the new class of biomaterials that can sense such stresses and respond accordingly. This review endeavors to explain the role of ROS in stem cell proliferation and differentiation, which is a key component in regeneration. This compilation also highlights the new class of biomaterials that can overcome the hypoxic conditions during tissue regeneration along with emphasis on the ROS-responsive biomaterials and their clinical applications. Incorporating these biomaterials in scaffolds development holds huge potential in tissue or organ regeneration and even in drug delivery.

Graphical abstract

     

SIRA: Scale illumination rotation affine invariant mask R-CNN for pedestrian detection

Applied Intelligence - In this paper, we resolve the challenging obstacle of detecting pedestrians with the ubiquity of irregularities in scale, rotation, and the illumination of the natural scene...