超深溜井爆破一次成井技术实践

为解决溜井掘进效率低、安全性差等问题，以柿竹园多金属矿掘进出矿溜井为例，提出了爆破一次成井技术，根据矿山具体爆破条件，设计了布孔参数、装药结构和起爆顺序等。实践表明，爆破一次成井技术施工天井效果良好，溜井贯穿上下2个分段，与设计相符，相较于普通法施工天井，节约成本30.7%，节约时间58.3%，经济效益显著，施工周期短，且安全性好，值得在其他类似矿山推广应用。     

浅谈诺兰达工艺控制

介绍了诺兰达炉氧平衡控制方法 ,对控制中常见的问题总结了一些相应措施。     

南（昌）长力钢铁公司优化热送热装率生产实践研究

通过对南（昌）长力钢铁公司2号铸坯机以及棒材生产线轧钢产能分析，优化转炉2号铸坯机一轧钢工序产能合理匹配；提高热送热装率的优化技术，该技术的应用不仅提高了棒材生产线生产能力而且节约能源。     

The Tenet experience and the design of protocols for integrated-services internetworks

The research done by the Tenet Group in multimedia networking has reached a point where it may be useful to reflect on the significance of its results for the current debate on how integrated-services internetworks should be designed. Such reflections constitute the main subject of this paper. The principles of the work and the conclusions reached so far by the Tenet researchers are discussed in the light of the conflict between the two major technologies being proposed to build future information infrastructures: namely, the Internet and the ATM technologies. The Tenet approach suggests one feasible way for resolving the conflict to the advantage of all the users of those infrastructures. This paper discusses various fundamental aspects of integrated-services network design: the choice of the service model, the type of charging policy to be adopted, and the selection of a suitable architecture.     

基于WNN与FCM的电动汽车动态充电负荷预测方法

随着电动汽车动态无线充电(EV-DWC)技术的发展,针对目前EV-DWC负荷建模理论工作不全面的现状,以交通流量作为影响充电负荷的主要因素,以天气、典型日期、季节等因素为次要影响因素,根据路况建立负荷模型,通过电动汽车型号和状态的聚类不同对汽车分配不同的功率,完成动态充电负荷的建立。采用小波神经网络(WNN)对时序信息进行处理预测,再同误差反向传播神经网络(BPNN)相结合预测充电道路上的车流,短期车流预测精度为85%,用模糊C聚类(FCM)算法对电动汽车的充电类型以及该类型所对应的充电功率进行划分,将进入充电道路的电动汽车分为7种类型。根据各种充电类型分配相应的充电功率,完成日负荷建模。     

Ionic liquid mediated nano-composite polymer gel electrolyte for rechargeable battery application

ABSTRACT

Nano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO₂ nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10^?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO₄ cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO₄) room temperature at 0.1C rate is found to be 138 mAh/g.     

一种新型蓄电池充电控制策略研究

在风光互补发电系统中,蓄电池作为风光互补发电系统的储能设备,在整个发电系统中起着非常重要的作用,而蓄电池充电控制方法的优劣,是影响其使用寿命的一个重要因素。文章对风光互补发电系统中蓄电池的常用充电控制方法进行了分析,提出了一种新的控制策略,即将蓄电池充电电压、充电电流采样值分别与蓄电池事先设定好的恒压过充电压、恒流充电限流值和浮充电流值进行实时比较,来判断采取哪种合理的充电方式,对蓄电池起到尽可能的保护,从而延长了风光互补发电系统中蓄电池使用寿命。     

Dynamic behaviour of viologen-activated nanostructured TiO2: correlation between kinetics of charging and coloration

The dynamic response of viologen-activated nanostructured titanium dioxide has been studied by means of electrical and electro-optical measurements. We show that the state of charge of the semiconductor network is the key factor mediating between the electrode potential and colouration of viologen. Theoretically, we relate the electrode potential to the statistics of occupancy of both TiO₂ nanoparticles and oxidized viologen molecules attached to the surface, on the assumption of quasi-equilibrium of Fermi levels in these contacting phases. Experimentally, we determine the statistical function from steady-state measurements (electrochemical impedance spectroscopy) of the capacitance of the semiconductor film. From this understanding we explain the main features that correlate the simultaneous voltammetry and transmittance responses. Finally, the redox process of viologen is resolved separately from the TiO₂ response by means of transmittance data.     

建设电动汽车电池更换式充电站的可操作性分析

电池更换充电模式在当前的科技水平条件下成为电动汽车推广普及的快捷方式。本文根据前人的研究成果。从现实可操作性的角度对电池更换式充电站的建设、管理、标准化等环节作出分析,并在充电时间、电池流通管理、充电安全等方面进行了比较论证,证明了电池更换式充电站的现实可操作性较强。