Structural and Functional Characterization of the ABCC6 Transporter in Hepatic Cells: Role on PXE,Cancer Therapy and Drug Resistance

Pseudoxanthoma elasticum (PXE) is a complex autosomal recessive disease caused by mutations of ABCC6 transporter and characterized by ectopic mineralization of soft connective tissues. Compared to the other ABC transporters, very few studies are available to explain the structural components and working of a full ABCC6 transporter, which may provide some idea about its physiological role in humans. Some studies suggest that mutations of ABCC6 in the liver lead to a decrease in some circulating factor and indicate that PXE is a metabolic disease. It has been reported that ABCC6 mediates the efflux of ATP, which is hydrolyzed in PPi and AMP; in the extracellular milieu, PPi gives potent anti-mineralization effect, whereas AMP is hydrolyzed to Pi and adenosine which affects some cellular properties by modulating the purinergic pathway. Structural and functional studies have demonstrated that silencing or inhibition of ABCC6 with probenecid changed the expression of several genes and proteins such as NT5E and TNAP, as well as Lamin, and CDK1, which are involved in cell motility and cell cycle. Furthermore, a change in cytoskeleton rearrangement and decreased motility of HepG2 cells makes ABCC6 a potential target for anti-cancer therapy. Collectively, these findings suggested that ABCC6 transporter performs functions that modify both the external and internal compartments of the cells.     

Dry Fractionation Approach in Concentrating Tocopherols and Tocotrienols from Palm Fatty Acid Distillate: A Green Pretreatment Process for Vitamin E Extraction

Palm fatty acid distillate (PFAD) is a rich source of vitamin E. As compared to other vegetable oil, PFAD has higher tocotrienol (70–80%) over tocopherol content, which makes it a valuable source for vitamin E extraction. Current vitamin E extraction methods are not sustainable due to the intensive usage of chemical and high operational cost. Hence, the present study investigated for the first time using dry fractionation process as a green and economical pretreatment method for separating solid fraction (stearin) and liquid fraction (olein) in order to concentrate vitamin E from PFAD in olein fraction. We examined the dry fractionation conditions: crystallization ending temperature (36–44 °C), cooling rate (0.3 and 1.5°C min⁻¹), stirring speed (20–125 rpm), and holding time (0–60 min) on the composition of unsaturated and saturated fatty acids as well as vitamin E content in liquid fraction (olein) and solid fraction (stearin) using gas chromatography and high performance liquid chromatography, respectively. In most of these conditions, vitamin E was ultimately higher in olein fraction as compared to stearin fraction, which is correlated with the high degree of unsaturation. Under a cooling rate of 0.3°C min⁻¹, 90 rpm stirring speed, and ending crystallization of 38 °C, the highest vitamin E rich olein fraction was attained with 1479 ± 10.51 ppm in 50 g olein fraction as compared to 1366 ± 7.94 ppm in 500 g of unfractionated PFAD.     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Fatigue behavior and damage evolution of SiC/SiC composites under high-temperature anaerobic cyclic loading

In the present study, the fatigue behavior and damage evolution of SiC/SiC minicomposites at elevated temperatures in oxygen-free environment are investigated which are important for their application and are still unclear. The high-temperature fatigue test platform is developed and the fatigue stress-life curve and the stress-strain response are obtained. The test result shows that the life of the material at elevated temperature is shorter than that at room temperature under the same stress level. Moreover, the hysteresis loop width and the residual strain increase with the increasing of the cycles while the hysteresis modulus decreases during the fatigue cycling. The evolution process of matrix cracks is observed using the real-time remote detection system. It is found that matrix cracking is insensitive to the cyclic loading which is similar to room temperature and is due to that the degeneration of the interfacial shear stress reduces the area of high stress in matrix. The fiber/matrix interfacial shear stress under different cycles is determined based on the fatigue modulus of each hysteresis loop. The result shows a fatigue enhancement phenomenon for the interface which is not observed at room temperature.     

Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

土木工程施工课程线上平台教学实践

土木工程施工课程作为土木工程及工程管理专业的学科基础课和核心专业课程,在疫情防控期间"停课不停教""停课不停学"的要求下,通过线上平台进行授课。由于土木工程施工课程内容庞杂、综合性强、实践性强,且章节之间关联性较弱,探究既能使学生快速适应,又能保证教学质量的在线教学方法至关重要。以华南某高校土木工程施工课程为例,基于中国大学MOOC、建筑云课、腾讯课堂、QQ群等线上平台讲授教学内容,并运用问卷调查对课程线上教学效果进行评价。结果表明,线上教学为学生提供了丰富灵活的学习方式,显著提高了学生的自主学习能力,扩大了学生的知识面,达到了较好的学习效果。     

Nonlinear phase dynamics of ideal kink mode in the presence of shear flow

We investigate nonlinear phase dynamics of an ideal kink mode, induced by E × B flow. Here the phase is the cross phase(θ_c) between perturbed stream function of velocity■ and magnetic field ■, i.e. θ_c= θ_φ-θ_ψ. A dimensionless parameter, analogous to the Richardson number,■(γ_(kink): the normalized growth rate of the pure kink mode; ■: normalized E × B shearing rate) is defined to measure the competition between phase pinning by the current density and phase detuning by the flow shear. When R_i 1, θ_c is locked to a fixed value,corresponding to the conventional eigenmode solution. When R_i≤1, θ_c enters a phase slipping or oscillating state, corresponding to a nonmodal solution. The nonlinear phase dynamics method provides a more intuitive explanation of the complex dynamical behavior of the kink mode in the presence of E × B shear flow.     

玉米毛油酸价及碱炼脱酸对其甘油酯组成及3-氯丙醇酯和缩水甘油酯的影响

对不同酸价的玉米毛油进行碱炼脱酸,并对碱炼前后玉米油中甘一酯、甘二酯、3-氯丙醇酯、缩水甘油酯、维生素E、植物甾醇含量进行检测,分析研究毛油酸价及碱炼脱酸对玉米油中甘油酯组成及3-氯丙醇酯、缩水甘油酯及其他成分的影响。结果表明:随玉米毛油酸价升高,甘一酯、甘二酯含量明显升高,甘三酯含量明显降低,毛油酸价(KOH)为3. 06～8. 70 mg/g时,毛油中甘一酯、甘二酯总量为6. 39%～17. 40%,甘三酯含量为82. 60%～93. 61%,3-氯丙醇酯含量为2. 09～3. 23 mg/kg,缩水甘油酯含量为0. 40～0. 51 mg/kg。分别对酸价(KOH) 4. 10、8. 70 mg/g的2个玉米毛油样品进行碱炼脱酸后,甘一酯和甘二酯总量分别降低了3. 34、4. 47个百分点,3-氯丙醇酯含量明显下降,但缩水甘油酯含量变化不大,说明碱炼脱酸过程对降低甘一酯、甘二酯含量的作用有限,对3-氯丙醇酯有一定的脱除作用,但对缩水甘油酯影响很小。此外,碱炼脱酸过程造成维生素E损失率21. 68%～24. 53%,植物甾醇损失率32. 67%～39. 99%。