LK6804A 机床的数控化设计

为满足LK6804A机床数控化配套需求,设计了一套该机床的数控系统。采用德国西门子数控公司840D型数控散件模块和其它配套集成,实现两轴进给控制、使用PLC实现开关信号控制并与DMS一起监控。该系统已投入实际使用。实践结果证明：该套系统设计极具可行性和实用性,充分激活了机床和系统功能,具有很高的性价比。     

Resource allocation in downlink OFDMA distributed multipoint systems with incoherent and coherent transmitters

Distributed multipoint systems (DMS) are important and timely for the move to future broadband wireless communication systems.Traditional studies on DMS have mainly focused on the issues with the spatial division multiple access such as precoding techniques,which only consider a narrowband case.This paper addresses the downlink radio resource management of the orthogonal frequency division multiple access DMS (OFDMA-DMS),including power allocation between users or subcarriers,and distributed antenna selection.Signal models with incoherent and coherent transmitters are built.To maximize the system throughput,for the incoherent transmitter case,a strategy based on the iterative water-filling power allocation is proposed to approach the optimality.As for the coherent case,where coherent additions of the signal could occur at the users,the problem is transformed into an integer programming which is solvable.Numerical results show that the gain from the coherent transmitter is promising.And to achieve a near-optimal solution,only part of the DA ports will be used,which have better channel conditions.     

基于基站扫频的WCDMA网络干扰排查实践

文章以无线频谱理论为依据,提出了基于基站扫频的WCDMA网络干扰分析与排查方法,介绍了该方法的优势与干扰分析定位流程,并给出了几个典型的干扰排查案例,最后对其降本增效的价值进行了评估。     

稀磁半导体Zn_（1-x）Ni_xO,Zn_（1-2x）Mn_xNi_xO及Zn_（1-2x）Co_xNi_xO纳米晶体的制备与磁性研究

利用溶胶-凝胶法制备了一系列的稀磁半导体材料如Zn1-xNixO、n1-2xMnxNixO及Zn1-2xCoxNixO晶体粉末,通过震荡样品磁强计（VSM）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和能量色散谱（EDS）分别对样品的磁性、晶相结构、形貌和成分进行了表征分析,讨论了获得本征铁磁性Zn1-xNixO样品的制备条件,比较了Mn、Co共掺杂对Zn1-xNixO磁性的影响,给出了Ni在ZnO中的固溶度以及实际掺杂浓度与名义掺杂浓度的关系。     

Upgrading Computational Design

Shajay Bhooshan heads up the computation and design ZHACODE group at Zaha Hadid Architects (ZHA) and is a course master at the Architectural Association Design Research Laboratory (AADRL). Here he argues that Parametricism 2.0 has a vital role to play in the progressing of computational design. Assimilating the exploratory developments of the last 15 years, he asserts how the next phase of Parametricism will enable a further consolidation and evolution of digital practices.     

基于TRSAPI科技情报管理系统

本文简要介绍了TRS中英文信息发布检索平台，对以C＋Builder 3.0为前端开发工具的TRS API7编程做了详细说明。根据大庆油田科技情报管理的需要，以TRS作为数据库存管理系统，设计并实现了一个科技情报服务系统。     

大功率柴油机管理系统的开发研究与应用

针对特种大功率柴油机，应用最新的微电子技术、控制技术和计算机软件技术开发设计了柴油机管理系统，通过合理地设计系统的结构，提高整个系统功能控制和参数管理的性能，最终使柴油机的经济性、动力性、排放等性能得以改善。在理论和试验应用的基础上，提出了大功率柴油机管理系统开发与设计的一般方法，为大功率柴油机管理系统的设计与应用提供了理论参考。     

Synthesis and surface properties of polydimethylsiloxane‐based block copolymers: poly[dimethylsiloxane‐block‐ (ethyl methacrylate)] and poly[dimethylsiloxane‐block‐(hydroxyethyl methacrylate)]

A polydimethylsiloxane (PDMS) macroazoinitiator was synthesized from bis(hydroxyalkyl)‐terminated PDMS and 4,4′‐azobis‐4‐cyanopentanoic acid by a condensation reaction. The bifunctional macroinitiator was used for the block copolymerization of ethyl methacrylate (EMA) and 2‐(trimethylsilyloxy)ethyl methacrylate (TMSHEMA) monomers. The poly(DMS‐block‐EMA) and poly(DMS‐block‐TMSHEMA) copolymers thus obtained were characterized using Fourier transform infrared and ¹H NMR spectroscopy and differential scanning calorimetry. After the deprotection of trimethylsilyl groups, poly(DMS‐block‐HEMA) and poly(DMS‐block‐EMA) copolymer film surfaces were analysed using scanning electron microscopy and X‐ray photoelectron spectroscopy. The effects of the PDMS concentration in the copolymers on both air and glass sides of films were examined. The PDMS segments oriented and moved to the glass side in poly(DMS‐block‐EMA) copolymer film while orientation to the air side became evident with increasing DMS content in poly(DMS‐block‐HEMA) copolymer film. The block copolymerization technique described here is a versatile and economic method and is also applicable to a wide range of monomers. The copolymers obtained have phase‐separated morphologies and the effects of DMS segments on copolymer film surfaces are different at the glass and air sides. Copyright © 2010 Society of Chemical Industry     

泥炭生物过滤器去除甲硫醚的微生物学研究

研究了泥炭和接种活性污泥的泥炭作为填料的生物过滤器去除甲硫醚（DMS）恶臭气体的情况，确定了生物过滤器中降解DMS的优势微生物种群，填料是原始泥炭的生物过滤器几乎不能去除DMS，接种活性污泥的泥炭生物过滤器则能有效地去除低浓度DMS气体。去除DMS适宜的pH值范围是7－5．45。微生物学分析表明，生物过滤器中去除DMS的优势种群是来源于活性污泥的非嗜酸化能自养型硫氧化菌。     

MOCVD制备过掺杂GaN基稀磁半导体微结构研究

应用MOCVD方法我们在c轴取向的蓝宝石衬底上生长出Fe掺杂和Mn掺杂GaN薄膜。通过改变前驱物的通入量,我们制备出不同掺杂浓度的样品。应用高分辨透射电镜,我们对样品的微结构进行了分析。对于Fe过掺杂GaN样品,我们发现了六角结构的Fe3N团簇的存在,并且Fe3N(0002)面平行于GaN(0002)面;对于Mn过掺杂GaN样品,我们发现了六角结构的Mn6N2.58相的存在,并且Mn6N2.58(0002)面平行于GaN(0002)面。同时,由于晶格中掺入了大量掺杂离子,GaN晶格取向遭到了破坏,导致了部分GaN(0002)面的倾斜。磁学测量表明均一相的Fe掺杂GaN显现铁磁性,而均一相Mn掺杂GaN没有铁磁性。由于铁磁性Fe单晶和Fe3N团簇的存在,相比于均一性Fe掺杂GaN,过掺杂GaN样品的磁性大幅度增强,而Mn过掺杂GaN样品显现出很弱的铁磁性,这有可能来源于Mn6N2.58相。