MP PFGun脉冲爆燃压裂技术在阿曼SSM-XX井的应用

简要叙述了MP PFGun技术工作原理、系统结构特点以及PropFrac脉冲压裂模拟器软件基本功能,并对SSM-XX井的模拟计算P-T曲线和井下压力仪实测曲线进行了对比。结果表明:SM-XX井采用MP PFGun电缆输送工艺安全,脉冲压裂持续时间长,且利用PropFrac模拟软件指导施工设计,取得了较好的应用效果。     

Effect of coral sand powders and seawater salinity on the impact mechanical properties of cemented coral sand

Coral sand is one kind of the important building materials in coral reef engineering practice. The use of cement as a stabilizing agent can significantly improve the mechanical properties of coral sands and is widely applied in the subbase engineering construction in coral reef islands. Cement-stabilized coral sand structures may contain high contents of fine coral particles and salinity because of the high crushability of coral sands and the existence of seawater surrounding them. In this study, the effects of coral sand powders and seawater salinity on the dynamic mechanical properties of cemented coral sand (CCS) were investigated through the split Hopkinson pressure bar (SHPB) tests and Scanning Electron Microscope (SEM) analysis. It was found that the strength (i.e., the peak stress) of CCS specimens increased firstly and then decreased with the increase of powder content. The specimens reached the maximum peak stress when 3% powder content was included. The initial improvement of CCS strength was attributed to the pore-filling effect of coral powders, namely, the micro pores of the CCS specimens could be more effectively filled with higher percentages of coral powders being used in the experiments. However, excessive coral powders resulted in the reduction of specimen strength because these powders could easily be cemented into agglomerates by absorbing water from the specimens. These agglomerates could reduce the cementation strength between the coarse coral particles and the cement. Meanwhile, the peak stress of CCS specimens was found to be negatively correlated with the average strain rate and the ultimate strain. The degree of specimen fracture was found to be correlated with the amount of specific energy absorption during the tests. Furthermore, the “sulfate attack” caused by the inclusion of salinity of water had different influences on the CCS specimens with different coral powder contents. The ettringite and gypsum produced in “sulfate attack” could fill the pores and lead to cracking of the specimens, significantly affecting the specimen strength.     

Generation,validation and application of dynamic load profiles in flow measurement using cavitating Herschel–Venturi nozzles

Today, utility meters for water are tested for measurement behavior at stable operating conditions at specified flow rates as part of the approval process. The measurement error that occurs during start and stop or when changing between flow rates may not be taken into account. In addition, there are new technologies whose measuring behavior under real-world conditions is only known to a limited extend. To take these facts into account, a new method has been developed and tested to determine the measurement behavior of water meters under dynamic load profiles as they occur in the real application. For this purpose, a test rig for flow rate measurement was extended by a cavitation nozzle apparatus and the generation of dynamic load profiles was validated. For the cavitation nozzles used, possible factors influencing the flow rate, such as temperature and purity of the water as well as the upstream pressure were investigated. Using different types of domestic water meters, the applicability of the dynamic test procedure was demonstrated and the measurement behavior of the meters was characterised.     

稀土灼烧过程温湿度场仿真分析

影响稀土灼烧工艺的因素十分复杂,关系产品质量稳定及能耗,现行工艺存在优化空间。通过剖析灼烧窑中温度和湿度分布状况,运用κ-ε双方程湍流模型、流体传热、多孔介质传热等理论,按特定组分运输模式,建立灼烧过程质量、动量和能量耦合传递数学模型。设置不同边界导入Fluent环境对数学模型进行仿真试验,完成数据处理实现工艺参数优化。结果表明所建模型能准确反映灼烧窑中温湿度场分布及变化,且最终仿真结果与实际灼烧后的产品湿度含量相符合。     

Main trends on the simulation of the drying of refractory castables - Review

Refractory castables develop microstructures after curing that behave as partially saturated porous media. Upon heating (during its drying stage), the steam generated by the physical and chemically bond water can result in pore pressurization and explosive spalling. Numerical modeling can provide guidelines for designing safer heat-up profiles and also a better understanding of the mechanisms that lead to catastrophic damage. This work aims to review the fundamentals and models available, providing insightful thoughts on the current trends of the drying phenomena of ceramic compositions. The review also highlights that there are models better oriented to result in reasonable predictions of pore pressure values and others focused on a more accurate representation of the main physical phenomena that take place during heating. According to the findings, there are still various challenges to attain accurate models with high applicability capable of yielding safer and more efficient drying of refractory castables.     

Weighted regularized extreme learning machine to model the discharge coefficient of side slots

In the current research, a modern learning machine algorithm named “Weighted Regularized Extreme Learning Machine (WRELM)" is implemented for the first time for the simulation of the coefficient of discharge of side slots. For this purpose, an effective variable on the coefficient of discharge of side slots is firstly introduced, then five distinctive WRELM models are produced by it for the estimation of the coefficient. In the next stage, a database is created for verification of WRELM results. it should be mentioned that 70% of the data are utilized for training the WRELM models, while the rest (i.e. 30%) for testing them. After that, the optimal number of hidden layer neurons as well as the best activation function of the WRELM algorithm are chosen. In addition, the best regularization parameter and also the weight function of the WRELM are achieved. By conducting a sensitivity analysis, the most effective variable for the simulation of the coefficient of discharge along with the WRELM superior model is introduced. The WRELM superior model estimates values of the coefficient of discharge with the maximum exactness and the highest correlation. For instance, the estimations of the correlation coefficient and scatter index for this model are computed to be 0.930 and 0.051, respectively. The sensitivity analysis shows that the ratio of the side slot crest height to its length and the Froude number should be considered as the most important input variables. A comparison between the WRELM with the ELM displays that the former works much better. Furthermore, an uncertainty analysis is executed for both models. Eventually, an equation is suggested for the estimation of the coefficient of discharge and a partial derivative sensitivity analysis is performed on it.     

基于旋翼负压混合吸附的爬壁清洗机器人系统动力学性能研究

针对爬壁清洗机器人越障时,负压装置的吸附力下降导致吸附不稳定的问题,设计了一种旋翼负压混合吸附工作的多边形履带清洗机器人,并对爬行稳定性及越障性能进行了动力学分析。首先根据机器人爬壁的运动原理,建立机器人沿玻璃幕墙上的动力学模型,计算出电机理论驱动力矩;其次分析机器人在跨越障碍过程中的运动模型,结合与壁面接触的实际受力状态,对越障过程中关键阶段的本体倾翻、滑移两种失效形式进行运动学和动力学分析;然后根据玻璃幕墙实际的障碍高度,确定多边形履带的参数和理论驱动力矩的大小,并研制了实验样机进行爬行和越障试验,结果表明所设计的机器人具有良好的越障性能。     

渐变刚度板簧式轻卡悬架阻尼参数仿真设计

为了有效提高渐变刚度钢板弹簧式轻型卡车的乘坐舒适性,根据弹簧受力与刚度和变形之间的关系,利用等频原理,建立了渐变刚度钢板弹簧力学特性解析计算模型,并利用钢板弹簧加载-卸载试验对所建立的模型的正确性进行了验证。基于1/2车辆行驶振动模型,利用MATLAB的Simulink工具箱,建立了考虑渐变刚度钢板弹簧力学特性的轻卡行驶振动仿真分析模型。最后,以人体振动舒适性最佳为目标,利用多岛遗传算法,建立了轻卡悬架系统阻尼参数仿真设计方法,并利用实车试验对所建立的轻卡悬架系统阻尼参数仿真设计方法的正确性进行了验证。上述研究为渐变刚度钢板弹簧式轻卡悬架系统参数的设计提供了有效参考。     

多机器人体间动态碰撞检测方法仿真研究

当前多结合包围求碰撞检测法、Average-Case法、K-DOPs法等实现多机器人体间动态碰撞的检测,均存在寻优性能较差、检测效率较低的问题。为此提出一种基于动态粒子群的多机器人体间动态碰撞检测方法。采用OBB层次包围盒方法,缩小多机器人之间需要动态碰撞检测的区域,同时把动态碰撞检测问题转换为物体特征对间距离机制的非线性优化问题,进而构建层次拓扑框架进行局部碰撞检测,将机器人体引入到粒子群算法中建立混合进化算法,找到动态碰撞检测的最优解,实现多机器人体间动态碰撞检测。仿真结果证明,所提方法的检测效率高达96%,且具有较高的寻优性能。