高速旋转机械用消除频率混叠现象的小波变换算法研究

高速旋转机械由于其工作转速高、控制精度高，其故障信号又属于微弱突变信号，造成常规监测方法准确率偏低，成为制约高速旋转机械故障监测进一步发展的最大障碍。本文设计了一种消除小波分解和重构过程中产生的频率混叠的算法。该算法利用傅里叶变换和傅里叶逆变换构成Mallat小波变换在分解和重构过程中所需的严格正交镜像滤波器，从而达到Mallat小波变换过程中必须具有的理想截止特性，最终去除掉多余的频率成分。利用改进前后的小波算法对实际信号进行分析，结果表明，本文设计的Mallat小波变换改进算法可消除信号分析中出现的频率混叠现象。     

飞秒激光光斑轮廓的傅里叶描述子重建及特征提取

在利用飞秒激光对单晶硅材料进行微尺度烧蚀时,衍生的等离子体发光光斑中蕴含着大量的加工信息。如何有效提取光斑图像的几何特征信息,对研究飞秒激光烧蚀加工工艺过程具有重要意义。轮廓特征是描述激光光斑最重要的特征之一,本文着重分析了等离子体光斑轮廓特征与光斑运动规律间的关系及光斑运动情况分类方法。首先,考虑到光斑微弱的特性,对光斑图像进行增强处理。其次,采用链码方法提取光斑轮廓特征,并利用傅里叶描述子低频特性,选取少量的描述子重建光斑图像轮廓特征,减少了复杂的计算量,有效提高了光斑图像分类的速度与质量。最后,运用Hu不变矩特征证明傅里叶描述子用于提取激光光斑对轮廓特征的有效性。     

Eliciting and measuring hesitance in decision-making

Hesitance is an innate human psychological phenomenon pervasive in our daily life. Although it is very complex and still not fully understood, there have been many studies related to this interesting topic. In this study, we proposed two fundamental problems about hesitance: the first is the generating problem, which is related to how to elicit hesitance information from human thinking; the second is the measuring problem, which is related to how to devise effective and reasonable methods to measure hesitance degrees from given hesitance information. With these two fundamental questions, we first discussed and analyzed several examples in real life involving hesitance, showing that it can indeed be recorded and represented. Then we roughly classified the hesitance information into two major classes: static hesitance and dynamic hesitance. Some simple and interesting methods were proposed to elicit hesitance, and more reasonable methods were proposed to measure the hesitance degree from the two classes of hesitance information. All methods that have been discussed in this study try to avoid complexity in every aspect while reserving strictness and reasonability; therefore, the present study provides suitable information for practitioners with different backgrounds.     

Stress distribution in thick-walled cylinder due to non-uniform radial pressure on the example of reinforcement corrosion in concrete

This paper presents an analytical solution to the non-uniform pressure on thick-walled cylinder. The formulation is based on the linear elasticity theory (plain strain) and stress function method. As an example, the proposed solution is used to model the stress distribution due to non-uniform steel reinforcement corrosion in concrete. The model is formulated considering different scenarios of corrosion pressure distribution. It is validated against the finite element model for different cases of non-uniform pressure distributions. The results show that the corrosion-induced cracks are likely to start just beyond the anodic zone. This is confirmed by the experimental tests on concrete cylinder exposed to non-uniform accelerated corrosion of steel reinforcement. The model can be effectively used to calculate the distribution of corrosion-induced stresses in concrete.     

继电保护中多路模拟量采集系统的设计

介绍了一种基于高性能浮点DSP芯片TMS320C32、CPLD芯片XC95288和A/D采样芯片AD976组成的多路采集系统的工作原理以及设计方法。通过对第一路施加特殊的电压量,在CCS开发环境下读取采样缓冲区的值,并利用Matlab对采样数据进行了全波傅氏变换。此外,该系统已在继电保护中得到广泛应用,实践表明,该系统能较好地解决多路模拟量的采集,并确保了采样数据的安全可靠性。     

Evaluation of particle recovery from microalgae

Coccoliths are micro-structured biomineral particles found in cell protective covering layers of coccolithophore species. They are mainly composed of CaCO₃ and their individual crystal entities are arranged in such a way that they construct complex and unique structures. This complexity is found down to the individual particle level and appears to have promising properties to offer. This study focuses on the essential step prior to any kind of implementation, which is the recovery of the material. It summarizes cleaning protocols found in literature, compares them for the first time for the same freshly cultivated material and addresses challenges that still need to be overcome. Further, it highlight the advantages and disadvantages of the best cleaning protocols, suggests optimizations with promising results and uses size distribution measurements to analyse the recovery efficiency. To that end, further characterization techniques, new for coccoliths, are introduced and used to improve our current knowledge of the particles behaviour.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

基于多尺度结构特征的快速异源图像匹配

针对异源图像提出一种基于多尺度密集结构特征的快速匹配算法。算法首先利用Gabor滤波器逐像素提取图像中的结构响应,再根据主方向响应对多尺度结构特征融合,然后使用快速傅里叶变换在频域计算各特征分量图像之间的卷积,最后将卷积生成的系数矩阵求和计算出图像之间的相似性并选择相似性最大位置作为匹配结果输出。本文算法能有效适应异源图像间的非线性灰度变化和噪声干扰问题。测试使用可见光、红外、雷达图像组成的异源图像数据集对本文算法和现有算法进行测试比较,结果表明:本文算法的平均误匹配率最低,并且计算速度有明显优势。     

A mechanism informed neural network for predicting machining deformation of annular parts

Controlling machining deformation of annular parts is crucial for ensuring the performance of high value products and equipment. For example, during manufacturing of critical parts in aircrafts and spacecrafts, accurate prediction of machining deformation is the basis for guiding the formulation of deformation control strategies. However, due to the complexity of the machining deformation of annular parts, existing methods still have limitations in accurate prediction. To this end, this paper proposes a mechanism informed neural network (MINN) to predict machining deformation of annular parts. MINN is realized by establishing the dual sub-networks structure and using enhanced loss functions with the consideration of the deformation mechanism model characteristics of annular parts. The deformation was decomposed into the axisymmetric portion and the non-axisymmetric portion according to the deformation superposition principle, and modeled separately based on the thin-shell theory and Fourier series. Experiment results showed that the proposed method could predict the machining deformation of annular parts more accurately and stably with a small amount of training data, compared with previous methods.