Determinants of the intention to use non-medical insertable digital devices: The case of Chile and Colombia

In the past, thinking of carrying electronic devices inside our bodies was only posed by non-real scenarios. The emergence of insertable devices has changed this. Since this technology is still in its initial development stages, few studies have investigated factors that influence its acceptance. This paper analyzes the predictors of the intention to use non-medical insertable devices in two Latin American contexts. We used partial least squares structural equation modeling to examine whether six constructs predicted intention to use insertable devices. A questionnaire was administered to undergraduate students located in Colombia and Chile (n = 672). We also examined whether these predictors influenced intention differently for both of them. Four common constructs significantly and positively influenced both Chilean and Colombian respondents to use insertable devices (hedonic motivation, habit, performance expectancy, and social influence). Also, the habit has a complementary mediating effect on the relationship between social influence and behavioral intention. By contrast, effort expectations were a positive and significant predictor, but only among Chilean respondents. Findings suggest that when technologies are emerging, well-known predictors of intention (e.g., performance and effort expectations) are less influential than predictors related to self-efficacy (e.g., habit and hedonic motivation). The use of insertable devices has a significant impact on society. Thus, a better understanding of what motivates their use has implications for both academia and industry.     

Multiplane displays based on liquid crystals for AR applications

Multiplane displays are capable of displaying 3D scenes with correct focus cues by creating multilayer 2D images in the display volume. Hence, such a 3D display technique could effectively address the accommodation‐vergence conflict (AVC) problem, which is prevalent in augmented reality (AR) displays. In this paper, we review the recent progress on multiplane AR displays based on liquid crystals (LCs) for AR applications. The working principle of multiplane AR displays is illustrated, the electro‐optical properties of the tunable LC devices are investigated and display prototypes are demonstrated. Finally, we discuss the prospects and challenges of multiplane AR displays based on LCs.     

石墨烯热电器件栅控特性研究

为了获得一种稳定可控的能源，提出一种栅控石墨烯热电器件。通过对石墨烯通道的载流子输运机理的分析，获得了温度和栅压对通道电阻的影响。依据半经典Mott公式推导了石墨烯塞贝克系数的表达式，同时给出了石墨烯的电导率和热导率模型。最后通过有限元分析(FEA)建模获得不同栅压条件下的器件温度，当栅极电压V_B=0 V时，石墨烯热电器件热端和冷端温度差为30 K；当V_B=6 V时，最大温差达到50 K；当V_B=30 V时，最小温差只有10 K。结果表明，栅压对热电器件的性能有明显的调控性。该研究可为石墨烯热电器件的设计提供理论参考。     

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm⁻²) with moderate radiance (<400 W sr⁻¹ m⁻²). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr⁻¹ m⁻², peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm⁻²), and tenfold increase in operational lifetime (when driven at 100 mA cm⁻²). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm⁻² and an EQE of ≈1% at 1 kA cm⁻² are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.     

Analysis of surface wave behavior in corrugated piezomagnetic layer resting on inhomogeneous half-space

This paper deals with propagation of Love type waves in a Piezomagnetic layer with corrugated boundaries overlying an inhomogeneous half-space. Inhomogeneity of elastic half-space is caused due to exponential variations in elastic parameters. Dispersion relations are obtained for magnetically open and short cases. Prominent effects of inhomogeneity, layer's width and corrugation on the phase velocity of considered wave are illustrated through graphs. Some particular cases are derived and exhibited through graphs. Also the influence of undulation parameter, elastic parameter, and piezomagnetic coefficient on phase velocity of considered wave has been marked separately. The present study finds its applications in designing and optimization of Love wave sensors and Seismic Acoustic Wave (SAW) devices. Findings may also be used for analytical study of wave propagation in piezomagnetic coupled structures.     

GaN中质子辐照损伤的分子动力学模拟研究

本文利用分子动力学方法研究了GaN在质子辐照下的损伤。对不同能量（1~10 keV）初级离位原子（PKA）引起的级联碰撞进行了研究，分析了点缺陷与PKA能量的关系、点缺陷随时间的演化规律、点缺陷的空间分布及点缺陷团簇的尺寸特征。研究结果表明，点缺陷的产生与PKA能量呈线性关系，不同类型的点缺陷随时间演化规律相似，点缺陷多产生在PKA径迹旁，点缺陷团簇多为孤立的点缺陷和小团簇。     

Low-threshold lasing in a plasmonic laser using nanoplate InGaN/GaN

Plasmonic nanolaser as a new type of ultra-small laser,has gain wide interests due to its breaking diffraction limit of light and fast carrier dynamics characters.Normally,the main problem that need to be solved for plasmonic nanolaser is high loss induced by optical and ohmic losses,which leads to the low quality factor.In this work,InGaN/GaN nanoplate plasmonic nanolaser with large interface area were designed and fabricated,where the overlap between SPs and excitons can be en-hanced.The lasing threshold is calculated to be ～6.36 kW/cm2,where the full width at half maximum (FWHM) drops from 27 to 4 nm.And the fast decay time at 502 nm (sharp peak of stimulated lasing) is estimated to be 0.42 ns.Enhanced lasing charac-ters are mainly attributed to the strong confinement of electromagnetic wave in the low refractive index material,which im-prove the near field coupling between SPs and excitons.Such plasmonic laser should be useful in data storage applications,bio-logical application,light communication,especially for optoelectronic devices integrated into a system on a chip.     

A tool for the automatic generation and analysis of regular analog layout modules

This paper describes the characteristics of a new CAD tool that enables the creation of layout libraries of selected analog modules. This Analog Modules Generator (AMG) automatically creates multiple layout versions of two commonly used analog structures: the differential pair and arrays of series-connected or stacked devices, for the subsequent generation of layout libraries. Based on the number of devices and rows defined by the user for the layout implementation, the tool validates all possible implementations, which are later saved in a database. Additionally, an extraction process can be optionally executed over all the layout views saved in the database. The AMG generates several reports with all the characteristics of the implemented layouts, including area and parasitic components, facilitating further statistical processing. We describe the features and capabilities of the proposed AMG tool, and several test cases are presented. Results show that suitable layout implementations can be achieved by layout and circuit designers in a very reduced amount of time.