A Survey of Various Schedulers Used for Fair Bandwidth Allocation in WiMAX: IEEE 802.16

ABSTRACT

Wireless Interoperability for Multiple Access (WiMAX) is one of the emerging fields of high-speed wireless communication that has enormous capabilities due to its range and the connection speed. Like wireless local area networks (LANs), WiMAX networks implement multiple quality of service (QoS) frameworks at the Media Access Control (MAC) level for assured data, voice, and video services. The question of ensuring QoS is basically how to distribute available resources to users in order to satisfy QoS parameters such as latency, jitter and throughput requirements. IEEE 802.16 standard does not have any particular guidelines on scheduling of incoming and outgoing data. This has caught the attention of researchers working on WiMAX. This article discusses the various issues in WiMAX along with a classification of various scheduling approaches based upon the type of scheduler for the sake of better understanding the scheduling problem and analyzing various available theories.     

宽带无线接入网技术的应用

宽带无线接入网技术作为一种有效的宽带解决方案而受到人们高度重视。本文主要介绍几种宽带无线接入方式及其特点、应用范围、优缺点等,并作了对比,供相关业者参考。     

Gini Coefficient for Voltage Security Assessment of Multi-stage Transmission Expansion Planning

Due to the voltage security uncertainty caused by construction sequence in multi-stage transmission expansion planning (MTEP) in bulk power grids, it is necessary to appropriately arrange the construction sequence of the MTEP schemes to reduce voltage security risk. The Gini coefficient is widely used to weigh the gap of residents' income distribution. In this paper, the voltage security Gini coefficient is defined as the voltage security risk index of the MTEP scheme, and is presented to quantitatively evaluate the entire voltage security of one MTEP scheme. Voltage security evaluation model of the MTEP is established based on voltage security Gini coefficient. Compared to the stabilization cost, the proposed model directly reflects the voltage security of the MTEP scheme, and the local optimum is avoided. The presented method is applied on the IEEE 118-bus 54-generator test system. Results show the validity and effectiveness of the proposed model.     

An optimal location of static VAr compensator based on Gramian critical energy for damping oscillations in power systems

The increase in the scale and complexity of interconnected power systems leads to multiple electromechanical oscillations. Therefore, the electric network needs to be made more stable. One type of Flexible alternating current transmission systems (FACTS) devices, namely the static VAr compensator (SVC), can be installed at buses to increase the stability margins and dampen the power system oscillations by exchanging capacitive and/or inductive load to maintain and/or control specific parameters of electrical power systems. The efficiency and performance of the SVC depend on its optimal location. Consequently, seeking the optimal placement for SVC has become a key issue. In this paper, we propose a novel method to find the optimal location for the SVC based on a two‐step approach. First, an energetic approach based on the combination of the controllability Gramian critical energy analysis with the balanced realization reduction technique is used to search for several feasible locations; then the transient stability is analyzed to compare and determine an optimal location through various test cases. The effectiveness of the proposed method has been demonstrated on the IEEE 39‐bus England power system and compared with the modal controllability index. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Goodput and throughput comparison of single‐hop and multi‐hop routing for IEEE 802.11 DCF‐based wireless networks under hidden terminal existence

We investigate how multi‐hop routing affects the goodput and throughput performances of IEEE 802.11 distributed coordination function‐based wireless networks compared with direct transmission (single hopping), when medium access control dynamics such as carrier sensing, collisions, retransmissions, and exponential backoff are taken into account under hidden terminal presence. We propose a semi‐Markov chain‐based goodput and throughput model for IEEE 802.11‐based wireless networks, which works accurately with both multi‐hopping and single hopping for different network topologies and over a large range of traffic loads. Results show that, under light traffic, there is little benefit of parallel transmissions and both single‐hop and multi‐hop routing achieve the same end‐to‐end goodput. Under moderate traffic, concurrent transmissions are favorable as multi‐hopping improves the goodput up to 730% with respect to single hopping for dense networks. At heavy traffic, multi‐hopping becomes unstable because of increased packet collisions and network congestion, and single‐hopping achieves higher network layer goodput compared with multi‐hop routing. As for the link layer throughput is concerned, multi‐hopping increases throughput 75 times for large networks, whereas single hopping may become advantageous for small networks. The results point out that the end‐to‐end goodput can be improved by adaptively switching between single hopping and multi‐hopping according to the traffic load and topology. Copyright © 2015 John Wiley & Sons, Ltd.     

A 5-GHz LC VCO with digital AAC and AFBS for 2.4 GHz ZigBee transceiver applications

A 5 GHz LC VCO (voltage-controlled oscillator) with automatic amplitude control (AAC) and automatic frequency-band selection (AFBS) for 2.4 GHz ZigBee transceivers is presented. Instead of continuous feedback loop, an alternative amplitude calibration scheme is proposed in this paper to alleviate the deficiencies inherent in the conventional approach. It helps to keep the VCO at optimum amplitude to avoid saturation of the cross-coupled transistors and therefore stabilizes the phase noise performance over process, voltage and temperature variations. For the ZigBee application with 16 frequency channels, a coarse tuning loop is added in this work to implement the frequency-band selection using the AFBS mechanism. The VCO core and the digital AAC, AFBS modules have been fully integrated in a 2.4 GHz ZigBee transceiver which was fabricated in a 0.18 μm RF-CMOS technology. The current consumption is 4.7 mA at 4.85 GHz with 1.8 V power supply and a chip area of about 0.285 mm² is occupied. The VCO is capable of operating from 4.67 GHz to 5.18 GHz and the measured phase-noise level is –120 dBc/Hz at 1 MHz offset from a 4.85 GHz carrier. The tuning sensitivity K_VCO of the VCO is about 78 MHz/V with 0.9 V control voltage.     

基于FPGA的高精度IEEE1588时间戳的设计与实现

简单介绍了IEEE1588协议的时间同步机制,提出了一种在物理层内部标记时间戳的方案,并采用FPGA设计实现了支持时间戳标记电路的10G Base-R PHY,仿真和测试结果表明这种PHY具有最多一个时钟周期的延迟抖动,极大地降低了网络延时抖动对时间同步精度的影响,满足高精度时间同步的要求.     

IEEE 802.11b DCF三维Markov非饱和链路模型

为了准确评估实际网络中IEEE 802.11b分布式协调功能(Distributed Coordination Function,DCF)的系统性能,提出了一种三维Markov链路模型,该模型综合考虑了DCF协议退避计数器冻结状态和有限重传次数,并结合M/M/1/K排队模型给出了在负载有限的情况下DCF系统性能的理论模型。仿真结果表明,该模型能准确地预测IEEE 802.11b DCF协议的系统性能。     

A smartphone‐based U‐Healthcare system for real‐time monitoring of acute myocardial infarction

In recent years, medical service has been evolving from systems designed around centralized hospitals to Ubiquitous Healthcare (U‐Healthcare). U‐Healthcare system can facilitate real‐time monitoring of patient states, and can provide medical checkups and management whenever and wherever the medical staff deems necessary. U‐Healthcare services can provide chronic condition monitoring in the early stages of diseases and help execute decisive medical action in emergencies. However, thus far, the application of U‐Healthcare systems has been limited to diseases such as obesity, diabetes, etc. Acute myocardial infarction (AMI) is among the most critical chronic diseases and requires early detection and treatment. In this paper, we propose an AMI diagnostic software technique and protocol that can support real‐time communication between the patient and medical personnel. Our monitoring and diagnostic system has been developed using a protocol based on ISO/IEEE 11073. When data is transferred from the patient's smartphone to a server in hospital, the medical personnel consult the patient's biosensor data to determine the status of the relevant disease and provide appropriate medical service. The relevant information is sent back to the patient's smartphone through a wireless network, and patients can view their data in graphical format through their smartphone. Copyright © 2015 John Wiley & Sons, Ltd.     

A queuing model for distributed scheduling in IEEE 802.16 wireless mesh networks

The IEEE 802.16 standard for wireless broadband networks includes the mesh mode in its specifications, where network nodes interact to deliver packets from a client to a remote destination through intermediate nodes. This paper presents a study of the capacity of IEEE 802.16 wireless networks in mesh mode by using M/G/1/L queuing model that represents each network node by incorporating the features of the standard in order to calculate the average delay and throughput in the node. An iterative method integrates the calculation results at each node, obtaining the end‐to‐end delay from any node of the mesh to the Base Station. Because of multiple hops, a node far from the Base Station may have its flows damaged. To minimize this problem, we propose a criterion for a fair distribution of resources. We show the numerical results of the model which indicate a good fit when compared with simulation results. Copyright © 2013 John Wiley & Sons, Ltd.