KCl/NaCl/CPI复合盐阳离子聚合物钻井液在南海大斜度井段中的应用

为改善南海东部惠州25-8油田大斜度井因泥岩水化造浆而引起的井壁失稳和钻井液增稠影响携砂的问题,在现有成熟PLUS/KCl钻井液的基础上开展复合盐阳离子聚合物钻井液研究,对钻井液配方进行了优化,评价了优化后钻井液的流变性、抑制性、封堵性和润滑性,并在惠州油田进行了现场应用。结果表明,复合盐阳离子聚合物钻井液配方中,无机盐类抑制剂KCl和NaCl的适宜加量为3%和12%、有机阳离子聚合物抑制剂PF-CPI适宜的加量为2.0%。该钻井液抑制性强,防膨率高达93.32%,钻屑回收率87.56%;受到钻屑侵污后的钻井液流变性能波动小,仍具有较低的黏度和合适的切力,有利于大斜度井携砂;封堵性和润滑性均优于PLUS/KCl钻井液体系。现场应用2口井,钻井液流变性良好,平均起下钻速度提高,钻井过程顺利,无复杂情况发生。复合盐阳离子聚合物钻井液可改善南海大斜度井起下钻阻卡的问题。     

60万吨/年磷酸二铵装置扩能改造

对磷酸二铵装置内相关设备能力进行了系统识别,找出了影响产能提高的瓶颈,并对瓶颈加以改造,可以使装置能力由原来的60万吨/年,提高至每年75万吨/年。     

面向消费类电子产品的自动化生产线成组技术

针对现代消费类电子产品快速更新换代的现状, 介绍了该类产品的自动化生产线成组技术,阐述了通过度量消费类电子产品相似性和派生性特征,对产线进行成组编码的原理,研究产线工位单元的建模方法,描述了建模内容,并通过有无装载板的产线结构,论述了产线成组编码集成的途径和方法.     

教学型智能制造生产线的设计

以智能制造主要技术元素为切入点,设计了教学型智能制造生产线。介绍了企业资源计划系统、制造执行系统、立体仓储单元、工业机器人、数控加工设备、激光打标设备、视觉检测设备、自动装配设备、物料传输设备等教学型智能制造生产线的组成结构,分析了工作流程。这一教学型智能制造生产线具有良好的柔性,可以根据客户需求增减工作单元、调整零件类型、定制商标等,具有较高的实用价值。     

An interpretative structural modeling based network reconfiguration strategy for power systems

The network reconfiguration is an important stage of restoring a power system after a complete blackout or a local outage. Reasonable planning of the network reconfiguration procedure is essential for rapidly restoring the power system concerned. An approach for evaluating the importance of a line is first proposed based on the line contraction concept. Then, the interpretative structural modeling (ISM) is employed to analyze the relationship among the factors having impacts on the network reconfiguration. The security and speediness of restoring generating units are considered with priority, and a method is next proposed to select the generating unit to be restored by maximizing the restoration benefit with both the generation capacity of the restored generating unit and the importance of the line in the restoration path considered. Both the start-up sequence of generating units and the related restoration paths are optimized together in the proposed method, and in this way the shortcomings of separately solving these two issues in the existing methods are avoided. Finally, the New England 10-unit 39-bus power system and the Guangdong power system in South China are employed to demonstrate the basic features of the proposed method.     

Stress-deformable state of isotropic double curved shell with internal cracks and a circular hole

This work is devoted to the stress–strain state of isotropic double curved shell with defect system. The construction is weakened by two non-through thickness (internal) cracks of different length and by a circular hole located between cracks. In this study we use the line-spring model. Within the framework of this model cracks are modeled as mathematical cuts of shell’s middle surface. This leads to a two-dimensional problem. The problem is reduced to a system of eight boundary integral equations. To ensure the uniqueness of solution an additional equation is added. In the numerical solution of the problem special quadrature formulas for singular integrals of Cauchy type and the finite difference method are applied. The influence of defects on each other for double curved shell has been investigated. The given theoretical results can be used for the calculation of structural elements with holes, cracks on the strength and fracture toughness in various branches of engineering.     

某核电机组水压试验泵汽轮发电机组启动试验不成功分析处理

对某核电机组水压试验泵汽轮发电机组启动试验不成功进行了分析与处理。由于限流器单向密封圈老化,导致2LLS003VV阀门开启时间与2LLS001VV阀门开启时间不匹配,从而导致小汽机瞬时进汽量过大,启动过程中跳机。根据原因分析制定处理措施,解决了小汽机启动试验不成功问题。     

Positioning of PV panels for reduction in line losses and mismatch losses in PV array

Partial shading decreases the power output of PV arrays due to mismatch losses. These losses are dependent on the shading pattern and the relative positions of shaded modules in the array. Various static and dynamic reconfiguration techniques have earlier been proposed to mitigate these losses. In an earlier proposed static reconfiguration technique, the power generation is enhanced by altering the physical location of the PV panels using a random Sudoku configuration without modifying the TCT (Total-Cross-Tied) based electrical connections. However, this arrangement faces drawbacks due to ineffective dispersion of shade and significant increase in wiring required. In this work, an optimal Sudoku arrangement to overcome these drawbacks is formulated. Further analysis indicate that the global peak of the optimal Sudoku based PV array occurs as the right most peak in the curve for most shading conditions, thus evidently obviating the need for complex MPPT (Maximum-Power-Point-Tracking) algorithms. The proposed configuration is compared with various other existing reconfiguration schemes in terms of power output and the comparison is presented. In addition, a general formulation is proposed to expand this pattern to any generic array. A strategy is also proposed to make such an interconnection practicable for very large size PV arrays.     

不同工况下弹流润滑与齿轮动力学耦合研究

为探究线接触下齿轮传动系统与弹性流体动力润滑的耦合特性,研究采用广义有限元法建立两级齿轮传动系统,通过有限元法求啮合刚度,考虑齿轮润滑状态下的油膜刚度效应,综合叠加齿轮油膜刚度与啮合刚度,使用Newmark积分法对动力学方程进行求解,分析了耦合润滑后不同工况下齿轮啮合位置处的动力学特性和润滑特性。结果表明：齿轮综合刚度会随转速的增加而减小,随负载增加而增大;转速相比于负载对于油膜厚度影响较大,且考虑了轴的柔性后,传动系统在共振转速区内振幅变化显著,会对油膜厚度和系统振动产生一定影响,耦合油膜后在高速共振区内齿面动载荷变化明显。     

全站仪观测误差与单向高程测量精度分析

本篇详细分析全站仪单向观测误差来源及处理方法,及对全站仪单向高程测量精度和对边高程测量进行分析研究。