Field trial of a reinforced landfill cover system: performance and failure

The geotechnical stability of an inclined multilayer capping depends on the shear strength available along the various interfaces. If the slope is very steep an additional reinforcing geosynthetic may be used to obtain a safer condition. Full-scale field trials can provide better resolution data on the reinforcement behaviour than conventional calculation methods based only on laboratory tests. The paper deals with a field trial carried out on multilayer capping, reinforced with a geogrid, in an Italian landfill. The geogrid behaviour was monitored for a month using displacement sensors and pressure cells located along the slope and in the anchor trench. Subsequently, the cover system was led to collapse by cutting the reinforcement and an analysis of the reinforcement behaviour and its relevance in the system stability were studied. This paper discusses in detail the setup of the field trial and the experimental data recorded during installation, monitoring, and failure phases of the system. The deformation behaviour of the geogrid during the entire test was recorded and analysed. The resulting data highlight the effects of the construction process on the geogrid behaviour including the contribution of geogrid creep characteristics until the failure.     

Opportunities for combining data of Estonian and Russian monitoring to reflect on water quality in large transboundary Lake Peipsi

Lake Peipsi, one of the world’s largest lakes, is shared between Estonia and Russia. The water quality in different parts of the lake has so far been assessed independently. Here we explore opportunities for combining data of Estonian and Russian monitoring. For that, we 1) analysed the compatibility of data for some water quality variables; 2) estimated the potential effects of the differences in sampling frequency; 3) provided a few regression models to calculate the missing data for months not sampled by the Russian side. Data of the concurrent Estonian and Russian sampling indicated a good compatibility. Estonian data analysis suggested that water quality assessment results are sensitive to sampling frequency. For example, total phosphorus (TP) in the largest basin showed a long-term decreasing trend in three month data that disappeared when data for other months were added. Disregarding some months may lead to under- or overestimation of certain factors with no consistency in the response of different basins. Hence, data of the whole ice-free period are recommended for an adequate water quality assessment. Furthermore, we demonstrated that monthly values of the water quality variables of the same year are autocorrelated. Based on this, we filled the gaps in the long-term data and compiled a dataset for the whole lake that enables its most comprehensive use in water quality assessment and management. Long-term data revealed no water quality improvement of Lake Peipsi. Further reduction of the external nutrient load is needed. Eutrophication is sustained by high internal phosphorus load.     

人工智能赋能在线实验教学行为分析

教学行为分析作是教学质量分析的重要组成部分，也是教学引导与反馈机制的重要依据。文章阐述了人工智能（AI）的含义及发展历程，重点分析总结了教学行为分析方法及AI在教学行为分析上的应用。文章以东南大学电工电子在线实验为研究平台，探索分析了AI技术在实验教学行为分析上的可行性，梳理了基于专家系统的在线实验分析系统的设计思路，充分探讨了“智能”教育在实验教学中的深刻内涵。     

电力系统自动化发展方向分析

计算机技术、控制技术及信息技术的发展,电力系统自动化面临着空前的变革,多媒体技术、智能控制技术将迅速进入电力系统自动化领域。     

有轨电车车载储能系统研究

有轨电车车载储能系统是当前的业内热点。对有轨电车车载储能系统进行了研究,分析了有轨电车车载储能系统的容量配置、拓扑结构选择,论述了有轨电车车载储能系统的能量管理策略,并介绍了有轨电车车载储能系统的应用情况。     

基于“校企协同”的制冷空调课程体系的构建

从制冷空调企业的现状出发,利用校企协同、产教融合的创新组织模式,整合暖通行业、企业和学校的资源优势,构建一套“协同创新”的制冷空调课程体系,从根本上提高建环专业学生工程素养和创新能力,以满足暖通行业、企事业单位对具有实践及创新能力的高素质应用型技术人才需求。     

快递分拣机器人控制系统的设计

为提高快递分拣效率,设计了一种基于OpenMV机器视觉模块的快递分拣机器人控制系统。在这一控制系统中,通过机器视觉技术实现快递件的轮廓识别、定位、扫码及分类,将STM32单片机作为运动控制核心,外接传感器感知机器人的状态,基于串口与机器视觉模块双向通信,实现对放置在地面的快递件进行自动分拣。通过制作样机验证了设计的合理性与可行性。     

基于XML的信息物理融合系统组件建模与仿真

信息物理融合系统（CPS）涉及多种计算模型的集成和协同工作，针对CPS设计方法不统一、重塑性差、复杂度高、难以协同建模验证等问题，提出一种结构化、可描述行为的异元组件模型。首先，用统一组件建模方法进行建模，解决模型不开放问题；然后，用可扩展标记语言（XML）规范描述各类组件，解决不同计算模型描述语言不一致和不可扩展问题；最后，用多级开放组件模型的协同仿真验证方式进行仿真验证，解决验证的不可协同问题。通过通用组件建模方法、XML组件规范描述语言以及验证工具平台XModel对医用恒温箱进行了建模、描述和仿真。医用恒温箱的案例表明，这种模型驱动建立可重塑异元组件并确认其设计正确性的过程，支持信息物理协同设计和边构建边纠正，可避免在系统实现过程中发现问题时再进行反复修改。     

Condition based maintenance of the two-beam laser welding in high volume manufacturing of piezoelectric pressure sensor

Two-beam laser welding (TBLW) is an advanced process for precise, low distortion joining of cylindrical miniature parts. The process is composed of a laser source, optics and various actuators, which form a sophisticated system for control and maintenance in high volume manufacturing. A well-established method for identifying welding defects and ensuring welding quality is the monitoring of plasma light emission in TBLW. Although such monitoring systems can detect a change in process status, they are not able to diagnose the nature of the fault. The main challenge in this research was to extend the use of quality-based monitoring systems to measure additional deterioration-related parameters and to estimate system deterioration from them by using expert knowledge.This paper shows a novel condition-based maintenance (CBM) for the TBLW system, which performs condition identification using online monitoring of plasma light emission in combination with offline inspection of the seam macrographs. A combination of quality parameters derived from seam macrographs of defective parts is used to identify process deterioration, such as contamination of the optics, misalignment of the optomechanical system, or reduced laser power. The information obtained is used to make predefined process adjustments based on expert domain knowledge. The implementation of the developed CBM in high volume manufacturing of piezoelectric pressure sensors resulted in more predictable TBLW by reducing system failures as well as shorter diagnosis times.     

Vertical oscillations of the thermocline caused by internal waves modify coldwater pelagic fish distribution: Results from a large stratified lake

Fishes typically occupy a species-specific temperature range, with their occupied depth being related to the lake’s temperature profile. When a fish’s preferred temperature range coincides with the thermocline, the location of their preferred thermal habitat is influenced by the rise and fall of internal waves, leading to possible changes in fish depth. These internal waves are common in large, stratified lakes, yet we do not know how they affect the spatial distribution and behavior of freshwater fishes. We conducted nighttime hydroacoustic surveys in a large, deep embayment of a large thermally stratified lake to observe whether pelagic fish respond to vertical oscillations of the thermocline caused by internal waves. The coldwater pelagic fish in our study (primarily cisco, Coregonus artedi) typically occupied a narrow vertical band approximately 5–8 m thick and temperatures between 10.8 ± 0.8–13.6 ± 1.6 °C (fishes sized 106–500 mm), just below the thermocline (centered around 15–17 °C). Importantly, the upper bound of fish depth varied in response to vertical thermocline movements associated with internal waves, suggesting fish respond to changes in their physical environment on timescales commensurate with basin-scale internal wave periods (hours to days), to remain within their preferred thermal habitat. Dissolved-oxygen levels were typically above avoidance thresholds of these fish, thus not likely exerting a strong influence on fish location. Our findings emphasize the need to account for internal waves when designing hydroacoustic and netting surveys, as thermocline movements can influence where fish are located.