Influence of the Impaction Angle on the Triboelectric Charging of Aerosol Nanoparticles

A low pressure impactor is used to measure triboelectric charging behavior of metallic nanoparticles. Ag nanoparticles, produced by spark discharge, were impacted onto Pt sputtered targets. The influence of the impaction angle and impaction velocity on the triboelectric charging was investigated. While for perpendicular impaction the charge transfer behavior of previous work was confirmed, the oblique impaction revealed new phenomena. Additional charge transfer was observable, which increases with obliqueness. The possibility of mass transfer between particle and target due to the high-energy collisions was also investigated. SEM characterization and Auger spectroscopy indicate mass transfer from the particle to the target surface.     

Comparative study of embrittlement of quenched and tempered steels in hydrogen environments

The study of steels which guarantee safety and reliability throughout their service life in hydrogen-rich environments has increased considerably in recent years. Their mechanical behavior in terms of hydrogen embrittlement is of utmost importance. This work aims to assess the effects of hydrogen on the tensile properties of quenched and tempered 42CrMo4 steels. Tensile tests were performed on smooth and notched specimens under different conditions: pre-charged in high pressure hydrogen gas, electrochemically pre-charged, and in-situ hydrogen charged in an acid aqueous medium. The influence of the charging methodology on the corresponding embrittlement indexes was assessed. The role of other test variables, such as the applied current density, the electrolyte composition, and the displacement rate was also studied. An important reduction of the strength was detected when notched specimens were subjected to in-situ charging. When the same tests were performed on smooth tensile specimens, the deformation results were reduced. This behavior is related to significant changes in the operative failure micromechanisms, from ductile (microvoids coalescence) in absence of hydrogen or under low hydrogen contents, to brittle (decohesion of martensite lath interfaces) under the most stringent conditions.     

塔里木盆地顺1走滑断裂带超深储层油气充注历史

顺北地区是近期塔里木盆地超深层油气勘探获得重大突破的领域。通过顺北地区奥陶系一间房组储层原油和天然气地化特征对比，并结合荧光颜色和显微荧光光谱参数分析，认为顺北地区奥陶系经历了多期油气充注，且早期充注原油遭受一定程度的生物降解，而天然气为原油伴生气。利用类异戊二烯烃、生物标志化合物和原油轻烃对顺北地区和顺南地区原油进行对比，发现顺北地区油气来源与顺南地区一样来自于寒武系玉尔吐斯组烃源岩，通过断穿寒武系的断层向上运移至奥陶系储集层。对顺北地区采集样品进行流体包裹体测试、冷阴极发光、荧光观察等系统分析，结果表明顺北地区发生了“五幕三期”油充注和一期天然气充注，第一期为加里东晚期，第二期为海西晚期，第三期为喜马拉雅晚期，而天然气充注发生在喜马拉雅晚期。     

Investigation of the hydrogen induced cracking behaviour of API 5L X65 pipeline steel

The effect of microstructural features on the hydrogen induced cracking (HIC) susceptibility of two API 5L X65 pipeline steels were investigated by cathodic charging, hydrogen permeation and hydrogen microprint experiments. Microstructural evaluation after hydrogen charging revealed cracks at the mid-thickness (segregation zone) of both plates. However, more severe cracks were observed in the plate with higher dislocation density and residual stresses. The plate with lower plastic strain and more {111}-oriented grains had less severe cracks. Inclusions found along the crack path, comprising of Si-enriched oxides and carbides contributed to the initiation and propagation of cracks. The variation of the trapping behaviour and hydrogen diffusion through the plates were examined. The results confirmed that a higher ratio of reversible to irreversible traps contributes to increasing HIC severity in steels. Additionally, hydrogen transport through the steels was most prominent along the grain boundaries, indicating the importance of grain boundary character to HIC.     

移相全桥变换器在电动汽车充电单元中的应用

分析了峰值电流控制模式下移相全桥变换器的工作原理,设计了电动汽车充电单元的串联双闭环控制器。该控制器外环主回路实时获取负载电压与输入参考电压之间的偏差,通过输入PID电压环对输出电压进行调节,其内环副回路实时计算原边控制电流与PID电压环控制输出的偏差,通过输入PID电流环对控制电流进行调节。针对当控制输入信号占空比大于50%后峰值电流变换器系统出现不稳定的问题,设计了一种斜坡补偿方法,并以PIC16F887单片机为核心,开发了一套电动汽车充电控制单元。实验结果表明,所设计的充电控制单元可以满足电动汽车的充电要求,并具有可靠性高、动态响应快、补偿网络易实现以及带宽增益较高等优点。     

Effects of Smart Charging of Multiple Electric Vehicles in Reducing Power Generation Fuel Cost

The high penetration of variable sources of renewable power generation will lead to operational difficulties in supply/demand balancing in the entire power system. The mass deployment of electric vehicles (EVs) and plug‐in hybrid vehicles (PHEVs) will also cause significant changes in electricity demand. Therefore, controlling and managing the charging time of EVs/PHEVs are effective approaches that are imperative for improving balancing in power system operation. We assumed travel patterns for EVs in a model of the future Tokyo power system and analyzed the power system loads, including the charging load of the EVs, under several charging control scenarios. We verified that charging time controls are substantially effective for reducing the fuel costs in the power system. Further, we found that load leveling under a multicar charging management scenario gave the best results in terms of the fuel costs in all cases.     

Distributed wireless power transfer in sensor networks with multiple Mobile Chargers

We investigate the problem of efficient wireless power transfer in wireless sensor networks. In our approach, special mobile entities (called the Mobile Chargers) traverse the network and wirelessly replenish the energy of sensor nodes. In contrast to most current approaches, we envision methods that are distributed and use limited network information. We propose four new protocols for efficient charging, addressing key issues which we identify, most notably (i) what are good coordination procedures for the Mobile Chargers and (ii) what are good trajectories for the Mobile Chargers. Two of our protocols (DC, DCLK) perform distributed, limited network knowledge coordination and charging, while two others (CC, CCGK) perform centralized, global network knowledge coordination and charging. As detailed simulations demonstrate, one of our distributed protocols outperforms a known state of the art method, while its performance gets quite close to the performance of the powerful centralized global knowledge method.     

Mass-Producible,Quasi-Zero-Strain,Lattice-Water-Rich Inorganic Open-Frameworks for Ultrafast-Charging and Long-Cycling Zinc-Ion Batteries

Low-cost and high-safety aqueous Zn-ion batteries are an exceptionally compelling technology for grid-scale energy storage. However, their development has been plagued by the lack of stable cathode materials allowing fast Zn²⁺-ion insertion and scalable synthesis. Here, a lattice-water-rich, inorganic-open-framework (IOF) phosphovanadate cathode, which is mass-producible and delivers high capacity (228 mAh g⁻¹) and energy density (193.8 Wh kg⁻¹ or 513 Wh L⁻¹), is reported. The abundant lattice waters functioning as a “charge shield” enable a low Zn²⁺-migration energy barrier, (0.66 eV) even close to that of Li⁺ within LiFePO₄. This fast intrinsic ion-diffusion kinetics, together with nanostructure effect, allow the achievements of ultrafast charging (71% state of charge in 1.9 min) and an ultrahigh power density (7200 W kg⁻¹ at 107 Wh kg⁻¹). Equally important, the IOF exhibits a quasi-zero-strain feature (<1% lattice change upon (de)zincation), which ensures ultrahigh cycling durability (3000 cycles) and Coulombic efficiencies of 100%. The cell-level energy and power densities reach ≈90 Wh kg⁻¹ and ≈3320 W kg⁻¹, far surpassing commercial lead–acid, Ni–Cd, and Ni–MH batteries. Lattice-water-rich IOFs may open up new opportunities for exploring stable and fast-charging Zn-ion batteries.     

15/25MN立捣卧挤炭素挤压机主机装配攻关

立捣卧挤炭素挤压机采用立式捣固预压,卧式挤压,旋转料室+延长料室结构,旋转料室和延伸料室均采用过盈配合,粗加工后要进行热装,压机整体高度较高,由于厂内不具备现场安装条件,导致装配难度很大,通过工艺和装配攻关,确定合理的安装方案,制作专用工装工具,采取相应措施,保证装配精度符合要求。     

终端镍氢电池充放电智能管理系统的应用研究

电力设备终端在使用过程中会经常面临长时间备货存储不工作或者长时间工作不停电这样的问题，这都会导致终端内的电池性能下降，而电力部门要求镍氢电池在任何使用情况下都要保持足够的剩余电量和活性。针对终端使用的这些问题，在现有终端的平台上设计了新的硬件电路和软件算法，增加了镍氢电池的自我管理功能，使电池可以具有自动进行充放电、激活等能力。