降低射频电路串扰噪声的布线方法

研究并解决了无障碍多层无网格射频电路的布线问题,主要包括三个部分:设计规则、串扰噪声限制和布线方法.首先通过设计规则计算连线参数,运用RLc模型估算串扰噪声,然后,按照需要连接的实节点个数进行归类并提出相应的布线算法.实验结果表明,该布线方法可有效地降低射频电路的串扰噪声.     

Test Generation for Crosstalk-Induced Faults: Framework and Computational Results

Due to technology scaling and increasing clock frequency, problems due to noise effects lead to an increase in design/debugging efforts and a decrease in circuit performance. This paper addresses the problem of efficiently and accurately generating two-vector tests for crosstalk induced effects, such as pulses, signal speedup and slowdown, in digital combinational circuits. These noise effects can propagate through a circuit and create a logic error in a latch or at a primary output. We have developed a mixed-signal test generator, called XGEN, that incorporates classical static values as well as dynamic signals such as transitions and pulses, and timing information such as signal arrival times, rise/fall times, and gate delay. In this paper we first discuss the general framework of the test generation algorithm followed by computational results. Comparison of results with SPICE simulations confirms the accuracy of this approach.     

串扰耦合的低频分析有效性及阻抗特性研究

从传输线模型出发，分析了二平行直导线间串扰的低频模型有效性，得出允许3dB误差的条件下，低频模型在工程计算串扰中的电学短线和频率足够小的具体限值；同时分析了端接阻抗大小对串扰耦合的影响。对电磁兼容性中的串扰耦合的工程应用有实际指导和参考意义。     

一种VDSL上行链路自适应功率回馈方案

上行链路功率回馈技术(UPBO：upstream power back-off)是VDSL(very high-speed digital subscriber lines)系统中的关键技术，它用于抵消同一电缆中短线对长线引起的严重的远端串扰(FEXT:far-end crosstalk)。文中从功率控制的角度分析了基于迭代注水的自适应UPBO方案，并进行了性能仿真分析。     

SN388地震仪道间感应分析及排除方法

通过分析SN388地震仪所得的地震记录，发现炮点的能量越强，炮点附近的地震道感应越大。通过实验得出结论，炮点附近的感应是由道间串音引起的，采取适当措施就可解决这种问题。     

Characterizing image quality of autostereoscopic displays by using the maximum luminance at each viewing position

A metric of the 3D image quality of autostereoscopic displays based on optical measurements is proposed. This metric uses each view's luminance contrast, which is defined as the ratio of maximum luminance at each viewing position to total luminance at that position. Conventional metrics of the autostereoscopic display based on crosstalk, which uses “wanted” and “unwanted” lights. However, in case of the multiple‐views‐type autostereoscopic displays, it is difficult to distinguish exactly which lights are wanted lights and which are unwanted lights. This paper assumes that the wanted light has a maximum luminance at the good stereoscopic viewing position, and the unwanted light also has a maximum luminance at the worst pseudo‐stereoscopic viewing position. By using the maximum luminance that is indexed by view number of the autostereoscopic display, the proposed method enables characterizing stereoscopic viewing conditions without using wanted/unwanted light. A 3D image quality metric called “stereo luminance contrast,” the average of both eyes' contrast, is proposed. The effectiveness of the proposed metric is confirmed by the results of optical measurement analyses of different types of autostereoscopic displays, such as the two‐view, scan‐backlight, multi‐view, and integral.     

Sharpness and noise characteristics of a half‐mirror stereoscopic display

Stereoscopic displays are becoming popular in entertainment and industrial applications. We characterize the spatial resolution and noise properties of a stereoscopic display with a half‐mirror and passive polarizing glasses. The upper display images reflected off the mirror have slightly degraded sharpness and reduced high spatial‐frequency noise resulting in modulation transfer functions (MTFs) of 0.59 and 0.50 at the Nyquist frequency with corresponding noise power spectra (NPS) values of 4.79 × 10^?6 and 5.17 × 10^?6 mm² at 10 mm^?1 in the horizontal and vertical directions. These results are compared to the characteristics of the individual displays with MTF values of 0.64 and 0.53 and NPS values of 6.24 × 10^?6 and 5.87 × 10^?6 mm². The polarizing glasses cause minimal reduction in sharpness and high‐frequency noise. The MTFs in the upper images observed with glasses are decreased to 0.54 and 0.47, while the NPS are decreased to 2.86 × 10^?6 and 2.01 × 10^?6 mm². When both displays are turned on and using the mirror and glasses, the observed luminance for each eye is increased from the luminance of the individual displays owing to crosstalk. We find that sharpness and noise are not affected by the interaction between the displays at the particular geometry tested in this study.     

保护装置交直流串扰问题的研究

交直流串扰问题一直是造成"保护三误"事故发生的重大隐患,用现有的直流系统来替代交流系统可以从源头上减少保护装置的误动事故的发生。本文提出了替代的方案和详细的设计方案,并进行了相关验证。     

狭缝光栅自由立体显示器的立体图像串扰度

为了表征狭缝光栅自由立体显示器存在的左右眼视差图像的混叠程度,提出了立体图像串扰度C的概念。根据狭缝光栅自由立体显示器的结构和工作原理,应用几何光学知识,分析得出了立体图像串扰度C的计算公式,并给出了一个具体的狭缝光栅自由立体显示器的计算结果。通过观看实验,证明了所定义的立体图像串扰度C可以定量描述观看者在立体可视区域看到的立体图像的串扰程度。