Establishment of a color tolerance for yarn-dyed fabrics from different color-depth yarns

Yarn-dyed fabric is often woven from warp and weft yarns in the same color depth to ensure a uniform color appearance. The difference in color depth between warp and weft tends to result in the uneven color of the yarn-dyed fabric. This article aims to establish a color tolerance for yarn-dyed fabric that can be woven with a qualified color appearance but from the warp and weft yarns in different color depths. A total of 27 yarn-dyed fabric samples in three color series (red, yellow, and blue) were evaluated by using the yarn-dyed fabric from warp and weft yarns in the same color depth of 2% (on weight of fabric, owf) as the standard. Visual assessment and instrumental measurement of color were carried out to establish the color tolerance ellipse that was defined as CMC (Color Measurement Committee) color differences (2:1) of no more than 1.00. It was found that the color strengths (K/S) and color differences (ΔE_CMC(2:1)) of these fabric samples for each color series had linear relationships with the color depths of warp and weft yarns. The color tolerance ellipses indicated that, even though the warp and weft yarns had an apparent color difference, they could be woven in fabrics with relatively uniform color appearance and meet the requirements for yarn-dyed fabric. This work provided valuable insight into the production of qualified yarn-dyed fabrics from unqualified dyed yarns.     

KDP/DKDP倍频晶体主截面定位方法

KDP/DKDP倍频晶体是惯性约束聚变系统中的关键元件,其主截面方向与晶体相位匹配角、晶体吸收系数紧密相关。为了实现KDP/DKDP倍频晶体主截面方向的高精度定位,本文提出一种光强测量间接定位方法。通过激光器结合稳功率仪及半波片输出稳定线偏振光,同时旋转相互正交的起偏器与检偏器可获得晶体的最佳消光位置即为主截面方向。推导了该测量系统光强的琼斯矩阵模型,给出了光强与起偏器、检偏器角度间的关系表达式。采用最小二乘方法拟合经过起偏器、倍频晶体及检偏器的光强变化曲线,从而可精确定位倍频晶体主截面的方向。通过计算机仿真模拟和实验验证了该方法的正确性和可行性。实验表明,该方法定位的重复测量精度优于0.02°,满足惯性约束聚变系统中KDP/DKDP倍频晶体主截面的定位控制精度要求。     

利用平面约束的月球车立体匹配方法

为了满足月球车视觉系统对检测障碍物检测的时效性和可靠性的需求，提出了一种基于平面约束和自适应惩罚参数的半全局立体匹配算法。首先，对极线校正后的两幅图像进行SIFT特征点提取与匹配，同时提取边缘特征；然后，利用匹配的SIFT特征点拟合空间平面，并根据平面估计左右图像所有像素点的视差搜索范围；最后，基于传统的半全局匹配算法，采用自适应惩罚参数的策略对左右图像进行立体匹配。实验结果表明：所提出的算法有效地降低了计算复杂度，其计算复杂度只有传统方法的19.9%，对于视差不连续区域以及遮挡区域都能够获得正确的匹配结果。较传统半全局匹配方法无论在速度还是匹配精度上都得到明显提高，为对立体匹配的实际应用奠定了基础。     

基于激光三角法的汽车同步带齿形轮廓参数测量

针对目前汽车同步带齿形轮廓参数测量过程中存在的测量效率低和人为因素影响大等问题,提出了一种基于激光三角法的汽车同步带齿形轮廓参数非接触式测量方案,并设计了相应的汽车同步带齿形测量装置。该装置通过激光位移传感器与汽车同步带传动速度的配合,对汽车同步带齿形轮廓数据进行采集,并提出一种改进后的分割算法对采集到的齿形截面轮廓数据进行特征分割。通过对分割后齿形数据的拟合,实现了齿形轮廓曲线特征的分段重构并获得被测带齿的轮廓参数。基于激光三角法对汽车同步带齿形轮廓参数进行测量,实现了对齿形轮廓参数自动测量提高了测量效率避免了人为因素的影响,保证了测量精度,有望在汽车同步带实际生产中得到应用。     

Echo signal envelope fitting based signal processing methods for ultrasonic gas flow-meter

The echo signal of the ultrasonic gas flow-meter is difficult to locate, and the computation of signal processing methods proposed by others is extensive which affects the meter’s real-time performance. Aiming at solving these problems the echo signal envelopes under different flow rates are analyzed. And three kinds of signal processing methods based on echo signal envelope fitting are proposed. The shape of the echo signal remains the “approximate spindle shape” as the flow rate increases, and the envelope gradient of the middle parts of the upper envelope’s rising section and the lower envelope’s falling section remains the same at different flow rates, so the mathematical models of the two sections are established to obtain the envelope gradient curves of the two sections. With the envelope gradient curves, the ranges of envelope and peak points that linearly distributed are obtained. The least squares fitting is performed on those peak points to obtain two feature straight lines for respectively representing the upper envelope’s rising section and the lower envelope’s falling section. According to the spatial characteristics of the feature straight lines, the points on the feature straight lines are selected as the feature points for quickly locating the echo signal. According to the offline verification and comparison, the best one of three kinds of signal processing methods is selected, and realized on the hardware system of the two-channel ultrasonic gas flow-meter. The transmitter of two-channel ultrasonic gas flow-meter is developed based on FPGA & DSP dual core structure. It utilizes the parallel processing capacity and logic control ability of FPGA to realize the controlling of the high-speed ADC & DAC and the storage of the data. At the same time, it adopts the high-speed computing capacity of DSP to implement the digital signal processing method. The gas flow calibration experiments were carried out in a national accredited testing agency to verify the effectiveness of the signal processing methods and system. The experimental results show that the improved signal processing method based on echo signal upper and lower envelope fitting can quickly and accurately locate the echo signal. And the measurable range of the ultrasonic gas flow meter based on this signal processing method is broadened to 10 m³/h to 1,300 m³/h, and the turndown ratio is broadened to 1:130.     

基于图像处理的分梳山羊绒长度检测方法

为了提高分梳山羊绒长度检测的效率、降低测量过程中人为因素的影响,提出一种基于数字图像处理技术的分梳山羊绒长度检测流程和方法。对分梳山羊绒进行数字图像采集,将采集到的图像转换成灰度图像,对灰度图像进行滤波、二值化处理、边缘提取、拟合曲线,最后根据GB 18267-2013《山羊绒》计算分梳山羊绒的平均长度。结果表明:该方法可以获得分梳山羊绒的边缘曲线,根据曲线测得的分梳山羊绒平均长度与人工测量长度非常接近,为分梳山羊绒长度检测提供了有效的方法。     

再生混凝土抗压强度试验研究

设计3种不同再生骨料取代率的再生混凝土立方体试件，分别在7 d、14 d、28 d、100 d龄期进行抗压强度试验，结果表明：长龄期再生混凝土立方体抗压强度有所增大，但高取代率比低取代率的抗压强度降低，再生混凝土后期强度增长速率高于普通混凝土。对试验室实测的再生混凝土立方体抗压强度与试验龄期进行拟合，拟合结果相关系数均大于0.97，吻合结果较好。     

Progressive fracture processes around tunnel triggered by blast disturbances under biaxial compression with different lateral pressure coefficients

To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance, experiments and numerical simulations were performed. The results show that the spatial distributions of acoustic emission (AE) events become very different as lateral pressure coefficients change. The combined effect of static stress and dynamic disturbance causes the damage around the tunnel, and initial stress conditions control the damage morphology. The blast disturbance cannot fundamentally change the damaged area but will deepen the extent of damage and accelerate the failure speed. The more significant the difference between the vertical and horizontal stresses is, the higher the impact on the tunnel by the dynamic disturbance is. The AE activity recovers to a relatively stable state within a short time after the blast and conforms to power-law characteristics.     

Correlation between B value deviation and sintering temperature of perovskite solid solution materials

The effects of different sintering temperatures on the system of Ba_0.5Sr_0.5TiO₃–La_0.8Ca_0.2MnO₃ (BST-LCM) material were investigated by means of scanning electron microscopy, X-ray, resistance-temperature measurements, and X-ray photoelectron spectroscopy. X-ray diffraction and X-ray photoelectron spectroscopy confirm that BST-LCM is completely miscible and BST is the main phase, which under the premise of following the theory of small polaron conduction, titanium ions interact with manganese ions, which affects the electrical properties of the system of BST-LCM material. For the electrical properties of related, the LCM content is inversely proportional to the activation energy. Through the linear fitting of the experimental data, the empirical formula between the sintering temperature B value and the content of solid solution is obtained, and the approximate B value within a certain range can be preliminarily calculated.     

基于机器视觉技术的水表新型检定方法

将机器视觉技术应用到水表检定系统中,通过固定在被检水表上方的高速高分辨率摄像机,动态获取运行中的水表图像,用颜色特征和背景高斯拟合建模结合的算法实现水表指针的准确定位,将图像实时转换成数字读数,并解决水珠、气泡等对读数干扰的问题,实现水表高效率全自动检定。