Stochastic collocation-based nonlinear analysis of concrete bridges with uncertain parameters

This paper focuses on the stochastic response of concrete bridges considering uncertainty in bearing and abutment stiffness. A multi-span simply supported bridge with concrete girders is selected. A 3D-dimensional model is prepared, and nonlinear response history analyses are performed. For the numerical dynamic simulation, the non-sampling stochastic method based on generalized polynomial chaos (gPC) expansion is utilised. The uncertain parameters include the vertical and shear stiffness of bearings and the lateral stiffness of abutments are presented by the truncated gPC expansions. Furthermore, the system response such as base shear, acceleration, velocity and displacement in different columns is presented by gPC expansion with unknown deterministic coefficients. The stochastic Galerkin projection is employed to calculate a set of deterministic equations. A non-intrusive solution, as a set of collocation points, determines the unknown gPC coefficients of the system response and the results are compared with Monte Carlo simulations. The key advantage of spectral discretization is the combination of the mentioned method with the spatial discretization, e.g. finite element model. This study also emphasises the accuracy in results and time efficiency of the proposed non-sampling method for uncertainty quantification of stochastic systems comparing to sampling procedure (e.g. Monte Carlo simulation).     

Robust adaptive control for unmatched systems with guaranteed parameter estimation convergence

This paper provides a modified model reference adaptive control (MRAC) scheme to achieve better transient control performance for systems with unknown unmatched dynamics, where an adaptive law with guaranteed convergence is introduced. We first revisit the standard MRAC system and analyze the tracking error bound by using L₂‐norm and Cauchy‐Schwartz inequality. Based on this analysis, we suggest a feasible way to compensate the undesired transient dynamics induced by the gradient descent–based adaptive laws subject to sluggish convergence or even parameter drift. Then, a modified adaptive law with an alternative leakage term containing the parameter estimation error is developed. With this adaptive law, the convergence of both the estimation error and tracking error can be proved simultaneously. This enhanced convergence property can contribute to deriving smoother control signal and improved control response. Moreover, this paper provides a simple and numerically feasible approach to online verify the well‐known persistent excitation condition by testing the positive definiteness of an introduced auxiliary matrix. Comparative simulations based on a benchmark 3‐DOF helicopter model are given to validate the effectiveness of the proposed MRAC approach and show the improved performance over several other MRAC schemes.     

Novel model reference adaptive control architecture using semi‐initial excitation‐based switched parameter estimator

This paper is a generalization of the recently developed techniques of initial excitation (IE)–based adaptive control with an introduction to the definition of semi‐initial excitation (semi‐IE), a still more relaxed notion than IE. Classical adaptive controllers typically ensure Lyapunov stability of the extended error dynamics (tracking error + parameter estimation error) and asymptotic tracking, while requiring a stringent condition of persistence of excitation (PE) for parameter convergence. Of late, the authors have proposed a new adaptive control architecture, which guarantees parameter convergence under the online‐verifiable IE condition leading to exponential stability of the extended error dynamics. In earlier works, it has been established that the IE condition is significantly milder than the classical PE condition. The current work further slackens the excitation condition by proposing the concept of semi‐IE. The proposed adaptive controller is proved to ensure convergence of the parameter estimation error to a lower‐dimensional manifold under the weaker semi‐IE condition, while the stronger condition of IE guarantees convergence of the parameter estimation error to zero. The designed algorithm is shown to improve transient response of tracking error sufficiently in contrast to conventional adaptive controllers.     

IC塔沼气燃烧系统开车调试总结

通过参加伊朗造纸项目废水车间IC塔沼气燃烧系统开车调试总结,介绍了IC塔沼气燃烧系统主要设备及投料试车、控制联锁及调试期间注意事项等。     

激励对往复式骨架油封密封性能的影响

为改善往复式骨架油封的泄漏问题,建立油封唇口密封区流体润滑的数值计算模型,模型考虑密封面粗糙形貌以及油封唇口的径向变形,通过求解雷诺方程分析密封区的流体力学特性,获得密封区的油膜厚度和压力分布,并分析激振频率和振幅对密封性能的影响规律。结果表明:随着激振频率的增加,内外行程中密封区的最小膜厚呈先增加后减小的变化趋势,激振频率越大,往复式骨架油封的密封性越差;内外行程中密封区的的最小膜厚随激振振幅的增加呈非线性增加,激振振幅越大,往复式骨架油封的密封性越好。综合考虑,为提高密封效果,往复式骨架油封适用于小频高幅的工作场合。     

发夹式换热器管束流致振动数值模拟研究

运用计算流体力学方法,采用ANSYS CFX软件对发夹式换热器的壳侧流场进行了三维数值模拟。流场计算中采用多孔介质模型对管束区域进行简化,分析了壳侧流场的速度分布,结果表明:直管段部分的流体湍流强度大于弯管段,且外层管束所在区域为高流速区,受流体冲刷严重。结合流场信息,通过功率谱生成随机激振力,采用ABAQUS软件模拟计算了湍流激振下管束的振动响应,结果显示管束的面外均方根位移远大于面内位移,且弯管部分的振动位移最大。该研究结果可为发夹式换热器的性能分析和优化设计提供参考和依据。     

UHVDC入地电流暂态过程对变压器励磁特性的影响

为研究接地极入地暂态电流对变压器励磁特性的影响，提出一种针对UHVDC入地电流暂态的计算方法，并搭建了受端地区直流偏磁仿真模型，计算了地表电位和偏磁电流在入地电流暂态过程中的响应，并分析了变压器的励磁特性。结果表明，暂态过程会显著增加10 km范围内的地表电位和偏磁电流，在UHVDC引起的变压器直流偏磁计算时应考虑入地电流暂态过程的影响。     

换能器结构参数对聚合物超声塑化黏弹生热的影响

为研究超声换能器结构参数对聚合物超声塑化过程黏弹性生热的影响，首先确定超声黏弹性生热系统的组成，进行纵振超声换能器结构设计；然后分析超声黏弹性生热过程及超声黏弹性生热原理；最后采用单一变量法分析超声换能器的主要结构参数对其纵振频率及工具头前端质点最大振幅的影响，将其实际输出的纵振激励加载于熔融聚合物，研究其结构参数对聚合物超声黏弹性生热过程及达到聚合物玻璃化转变温度所用时间的影响。结果表明，随纵振激励作用时间的增加，聚合物温度非线性升高；放大比对聚合物温度变化影响最大，前盖板厚度和工具头长度次之，影响最小的是变幅杆长度。     

Synthesis,energy transfer mechanism,and tunable emissions of novel Na3La(VO4)2:Re3+ (Re3+ = Dy3+, Eu3+, and Sm3+) vanadate phosphors for near-UV-excited white LEDs

In this study, novel Eu³⁺-, Dy³⁺-, and Sm³⁺-activated Na₃La(VO₄)₂ phosphors were synthesized using a solid state reaction method. X-ray diffraction analysis results indicated that the Na₃La(VO₄)₂ phosphors had an orthorhombic crystal structure with the Pbc21 space group. There were two different La(1)O₈ and La(2)O₈ polyhedra with high asymmetry in the crystal structure. Scanning electron microscopy revealed that the product had a sheet morphology with an irregular particle size. Further, the luminescence properties, including the excitation and emission spectra, and luminescence decay curve, were investigated using a fluorescence spectrometer. The results showed that the Na₃La(VO₄)₂ compound was an excellent host for activating the luminescence of Eu³⁺ (614 nm), Dy³⁺ (575 nm), and Sm³⁺ (647 nm) ions. Further, Dy³⁺/Eu³⁺ co-doped Na₃La(VO₄)₂ phosphors were exploited, and the energy transfer from Dy³⁺ to Eu³⁺ was demonstrated in detail by the photoluminescence excitation, photoluminescence spectra, and luminescent decay curves. The results showed that the energy transfer efficiency from Dy³⁺ to Eu³⁺ was highly efficient, and the energy transfer mechanism was dipole–dipole interactions. Finally, tunable emissions from the yellow region of CIE (0.3925, 0.4243) to the red region of CIE (0.6345, 0.3354) could be realized by rationally controlling the Dy³⁺/Eu³⁺ concentration ratio. These phosphors may be promising materials for the development of solid-state lighting and display systems.