High performance H2 sensor based on rGO-wrapped SnO2–Pd porous hollow spheres

Hydrogen (H₂) sensors based on metal oxide semiconductors (MOS) are promising for many applications such as a rocket propellant, industrial gas and the safety of storage. However, poor selectivity at low analyte concentrations, and independent response on high humidity limit the practical applications. Herein, we designed rGO-wrapped SnO₂–Pd porous hollow spheres composite (SnO₂–Pd@rGO) for high performance H₂ sensor. The porous hollow structure was from the carbon sphere template. The rGO wrapping was via self-assembly of GO on SnO₂-based spheres with subsequent thermal reduction in H₂ ambient. This sensor exhibited excellently selective H₂ sensing performances at 390 °C, linear response over a broad concentration range (0.1–1000 ppm) with recovery time of only 3 s, a high response of ～8 to 0.1 ppm H₂ in a minute, and acceptable stability under high humidity conditions (e. g. 80%). The calculated detection limit of 16.5 ppb opened up the possibility of trace H₂ monitoring. Furthermore, this sensor demonstrated certain response to H₂ at the minimum concentration of 50 ppm at 130 °C. These performances mainly benefited from the special hollow porous structure with abundant heterojunctions, the catalysis of the doped-PdO_x, the relative hydrophobic surface from rGO, and the deoxygenation after H₂ reduction.     

Numerical study of a concept for major repair and replacement of offshore wind turbine blades

Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack‐up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods for installation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore wind turbine blades. The concept involves a medium‐sized jack‐up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform for clamping, lowering, and lifting of a blade. A case study of a 5‐MW offshore wind turbine is shown, where common engineering practices were applied and numerical simulations of the marine operations were carried out using finite element and multibody simulation tools. Operational limits for wave and wind actions were established to demonstrate the technical feasibility of the proposed concept.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

干湿联合冷却塔冷却节水分析软件开发及应用

为实现对干湿联合冷却塔冷却特性、节水特性的综合分析，编制干湿联合冷却塔校核计算流程，基于Visual Studio开发平台，本文开发了干湿联合冷却塔冷却节水特性分析优化软件。通过对某在运干湿联合冷却塔进行冷却节水特性计算，验证了所开发软件计算结果的准确性；在消雾节水计算结果基础上，对标干湿联合消雾冷却塔验收测试规程，生成其成雾频率曲线、耗水量曲线、塔雾指数、冷却特性曲线，综合分析其消雾特性、节水特性及冷却特性，从而确定了干湿联合冷却塔的最佳运行工况。同时运用所开发软件对比分析了某冷却塔设计干段散热面积对其消雾特性、节水特性及冷却特性的耦合影响，并分析了百叶窗开度对干湿联合冷却塔性能的影响，为干湿联合冷却塔的运行优化和设计优化提供了工具性软件支持。     

Post-combustion of mazut with CO2 capture using aspen hysys

There is a wide range of resources for CO₂ emissions. The net amount of CO₂ emissions in the cement industry due to the consumption of fossil fuels and the chemical processes of cement production under heating raw materials is reported to be in the range of 15–25%; this industry, among all the industries and after the power plants and refineries, is the largest CO₂ gas producer throughout the world. Using CO₂ capture and storage (CCS), it can reduce greenhouse gas emissions in a short time. In this study, the technical feasibility study of recycling CO₂ in Abyek Cement Company, with a cement production capacity of about 12,500 tons per day in two production lines, has been studied as one of the largest cement industries throughout the world. Fuel oil (Mazut) is used as the primary fuel for furnaces in this industry. Affected by combustion, the emissions emitted from the five-stage preheater contain 5/24% vol% of CO₂, 7.6% H₂O, 4.8% vol% of O₂, and 63.1% N₂.     

采用信道估计法的基站VSWR实时检测

为解决无线基站宽带工作频带内电压驻波比(Voltage Standing Wave Ratio,VSWR)的实时测量，提出了一种采用信道估计法的测量方案。该方案实现简单，在基带处理单元高速率位置发送数据，依次抓取射频通道反馈和反射数据，分别求取信道响应序列，结合工厂装备测试数据，计算驻波反射系数和反射点位置。发送信号采用宽带正交频分复用信号，能检测到工作频段内任何频点处的驻波异常。有用信号前加循环前缀，并引入峰值抵消核，能正确检测到多个反射点驻波。仿真结果表明，该方案驻波测量精度和单回波点位置精度达到预期，多回波点测量能抓准外部主要故障点，在基站VSWR实时测量中具有良好的应用前景。     

基于文本与语义相关性分析的图像检索

为了更加有效地检索到符合用户复杂语义需求的图像，提出一种基于文本描述与语义相关性分析的图像检索算法。该方法将图像检索分为两步：基于文本语义相关性分析的图像检索和基于SIFT特征的相似图像扩展检索。根据自然语言处理技术分析得到用户文本需求中的关键词及其语义关联，在选定图像库中通过语义相关性分析得到“种子”图像；接下来在图像扩展检索中，采用基于SIFT特征的相似图像检索，利用之前得到的“种子”图像作为查询条件，在网络图像库中进行扩展检索，并在结果集上根据两次检索的图像相似度进行排序输出，最终得到更加丰富有效的图像检索结果。为了证明算法的有效性，在标准数据集Corel5K和网络数据集Deriantart8K上完成了多组实验，实验结果证明该方法能够得到较为精确地符合用户语义要求的图像检索结果，并且通过扩展算法可以得到更加丰富的检索结果。     

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

At present, several composite insulation systems were proposed that can be used for passive insulation systems, including foam-variable density multilayer insulation (VDMLI), aerogel-VDMLI and hollow glass microspheres (HGMs)-VDMLI. The passive insulation systems with different inner material (IM) showed different performances. However, the relationship between the average thermal conductivity of IM and the insulation performance of the whole system has rarely been investigated. It is of great significance for efficient configuration and matching of the passive insulation system. In this paper, a series of average thermal conductivity of IM were assumed to predict the insulation performance of the whole system at 20 K–300 K and high vacuum. In order to further illustrate the relationship between IM and MLI/VDMLI, the foam was replaced by the HGMs as 5 mm a unit forming a series of HGMs-foam-MLI/VDMLI insulation systems. The performance of the systems was investigated. After the foam was completely replaced by the HGMs, the performance of MLI and VDMLI systems was improved 33% and 13%, respectively. Moreover, each mode of heat transfer including solid conduction, radiation, and gas conduction for foam-MLI/VDMLI and HGMs-MLI/VDMLI insulation systems were calculated and analyzed.     

高低孔爆破处理高陡边坡的技术分析

针对前期规划不当,大宝山露天矿877 m平台高陡边坡局部存在难以采用预裂爆破技术进行处理的情况,决定采用高低孔爆破处理技术。为了解决这一难题,首先分析了高低孔的相对内涵,并对高低孔孔深计算公式进行了简单推导,然后通过公式计算得到了高低孔的孔深。在施工阶段,为了确保低孔的实施效果,两排低孔分区域使用同段别毫秒延时雷管,晚于高孔起爆。实践表明,处理后的平台平整度良好,坡面较为稳定,对高陡边坡采用高低孔爆破处理具有可行性,效果较好,可为类似边坡处理提供新思路。