Health and Indoor Climate Complaints of 7043 office Workers in 61 Buildings in the Netherlands

During the winter of 1988/1989, the relationships between the prevalence of work-related health and indoor climate complaints and a number of building, management, workplace and personal characteristics have been investigated in a study in more than 60 office buildings located throughout the Netherlands. To collect the information, a questionnaire was prepared on health and indoor climate complaints and personal and workplace characteristics. A checklist was used to obtain information on building characteristics More than 7000 questionnaires were completed by the regular users of the buildings investigated. The results showed that the prevalence of symptoms was higher in air-conditioned buildings than in naturally or mechanically ventilated buildings. some other variables were also related with most work-related complaints after adjustment for selected management, personal, workplace and job characteristics. These included gender, work satisfaction in general, presence of allergies and/or respiratory symptoms, and personal control over temperature at the workplace. No differences were found in symptom prevalences between buildings with spray and steam humidification. The combination of air-conditioning and humidification did not lead to further increases in the prevalence of complaints as compared to buildings with only airconditioning or only humidification.     

论室内色彩设计的人性化

人性化的色彩设计理念体现出对使用者的人文精神关怀。本文从色彩的基本特征出发,对室内设计色彩人性化问题加以探讨。以理论和实际相结合的论述手法,探索室内环境人性化色彩设计的方法。人性化是未来室内环境色彩设计的必然趋势。     

多串口转GPRS组网方式的基站监控应用

在无有线传输资源的移动基站中,基站内智能设备通过多串口转GPRS传输方式实现了对基站的远程监控,提高了监控覆盖率。GPRS技术使用方便,成本较低,可以稳定地传送数据,有利于大规模网络的建立。     

Evaluation of the Thermal Comfort of a Thermoelectric Ceiling Cooling Panel (TE-CCP) System

This present work evaluates the cooling performance and thermal comfort of a thermoelectric ceiling cooling panel (TE-CCP) system composed of 36 TE modules. The cold side of the TE modules was fixed to an aluminum ceiling panel to cool a test chamber of 4.5 m³ volume, while a copper heat exchanger with circulating cooling water at the hot side of the TE modules was used for heat release. Thermal acceptability assessment was performed to find out whether the indoor environment met the ASHRAE Standard-55's 80% acceptability criteria. The standard was met with the TE-CCP system operating at 1 A of current flow with a corresponding cooling capacity of 201.6 W, which gives the COP of 0.82 with an average indoor temperature of 27°C and 0.8 m/s indoor air velocity.     

WCDMA与GSM无线网络规划比较

首先介绍了WCDMA和GSM系统不同的技术特点并进行了比较,在此基础上,结合无线网络规划的一般流程,对这两种系统在无线网络规划方面进行了分析比较,研究了他们之间的异同。通过这种分析和比较,借鉴GSM网络比较成熟的网络规划技术和经验,对于即将开始进行的第三代移动通信网络规划具有一定的参考价值。     

Balance testing and balance-testable design of logic circuits

We propose a low-cost method for testing logic circuits, termed balance testing, which is particularly suited to built-in self testing. Conceptually related to ones counting and syndrome testing, it detects faults by checking the difference between the number of ones and the number of zeros in the test response sequence. A key advantage of balance testing is that the testability of various fault types can be easily analyzed. We present a novel analysis technique which leads to necessary and sufficient conditions for the balance testability of the standard single stuck-line (SSL) faults. This analysis can be easily extended to multiple stuck-line and bridging faults. Balance testing also forms the basis for design for balance testability (DFBT), a systematic DFT technique that achieves full coverage of SSL faults. It places the unit under test in a low-cost framework circuit that guarantees complete balance testability. Unlike most existing DFT techniques, DFBT requires only one additional control input and no redesign of the underlying circuit is necessary. We present experimental results on applying balance testing to the ISCAS 85 benchmark circuits, which show that very high fault coverage is obtained for large circuits even with reduced deterministic test sets. This coverage can always be made 100% either by adding tests or applying DFBT.This research was supported by the National Science Foundation under Grant No. MIP-9200526. Parts of this paper were published in preliminary form in Proc. 23rd Symp. Fault-Tolerant Computing, Toulouse, June 1993, and in Proc. 31st Design Automation Conf, San Diego, June 1994.     

Simulation of global solar radiation based on cloud observations

A stochastic model for simulating global solar radiation on a horizontal surface has been developed for use in power systems reliability calculations. The importance of an appropriate model for global solar radiation has increased with the increased use of photovoltaic power generation. The global solar radiation shows not only regular yearly and daily variations but also a random behaviour. The yearly and daily variations can be described in a deterministic way while the random behaviour has a high correlation with the state of the atmosphere. The astronomic effects can easily be described mathematical with only some minor simplifications but the atmospheric effects are more complicated to describe. The transmittivity of solar radiation in the atmosphere depends on various factors, e.g. humidity, air pressure and cloud type. By using cloud observations as input for the simulations, the local meteorological conditions can be accounted for. The model is usable for any geographical location if cloud observations are available at the location or at locations with similar climatological conditions. This is especially useful for development countries where long-term solar radiation measurement can be hard to obtain. Cloud observations can be performed without any expensive equipment and have been a standard parameter for many years throughout the world. Standard observations are done according to the Oktas-scale. It is the interval between observations that sets the resolution of the simulation: the observations are normally only every hour or every third hour. The model can easily be combined with cloud coverage simulations, has been proposed, for a more general model. For some calculations higher resolution may be needed. This can be obtained by including a stochastic model for the short-term variations and simple model has been proposed. Errors and limitations of the model are estimated and discussed.     

高档住宅小区综合覆盖解决方案

从高档住宅小区网络建设的必要性、建设原理入手,详细讨论了小区中各功能区的无线覆盖方案.说明了天馈线选择、布线以及走线的注意事项.最后以实例论证了所提出的方案.     

无线基站用于海域覆盖时出现的问题及其解决方法

首先提出了用GSM900无线基站在做近海海域覆盖时会出现的一些问题，并阐述了其原因：随后给出了处理这些问题的解决方案，最后提供了一个在实际工程中对某海域覆盖型基站的测试实例。