首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   55624篇
  免费   6720篇
  国内免费   3399篇
电工技术   16671篇
技术理论   4篇
综合类   4242篇
化学工业   5556篇
金属工艺   3835篇
机械仪表   2422篇
建筑科学   2856篇
矿业工程   1667篇
能源动力   1840篇
轻工业   2021篇
水利工程   1195篇
石油天然气   3735篇
武器工业   440篇
无线电   8157篇
一般工业技术   3915篇
冶金工业   3007篇
原子能技术   855篇
自动化技术   3325篇
  2024年   47篇
  2023年   787篇
  2022年   1319篇
  2021年   1622篇
  2020年   1857篇
  2019年   1454篇
  2018年   1403篇
  2017年   1974篇
  2016年   2111篇
  2015年   2380篇
  2014年   3634篇
  2013年   3301篇
  2012年   4540篇
  2011年   4835篇
  2010年   3412篇
  2009年   3428篇
  2008年   3180篇
  2007年   4074篇
  2006年   3636篇
  2005年   2959篇
  2004年   2438篇
  2003年   2104篇
  2002年   1684篇
  2001年   1580篇
  2000年   1284篇
  1999年   986篇
  1998年   689篇
  1997年   569篇
  1996年   509篇
  1995年   406篇
  1994年   342篇
  1993年   251篇
  1992年   214篇
  1991年   163篇
  1990年   128篇
  1989年   98篇
  1988年   61篇
  1987年   50篇
  1986年   36篇
  1985年   46篇
  1984年   50篇
  1983年   27篇
  1982年   18篇
  1981年   14篇
  1980年   15篇
  1979年   3篇
  1978年   4篇
  1977年   4篇
  1966年   2篇
  1959年   7篇
排序方式: 共有10000条查询结果,搜索用时 15 毫秒
1.
逆变型分布式电源(IBDG)的输出由其控制策略决定而具有很强的非线性,使传统配电网的短路电流计算方法不再适用,而配电网的不对称更是进一步增加了其短路计算的难度。根据对称分量法推导出不平衡配电网的故障点各序电流,提出一种基于序网络迭代修正的不平衡配电网短路电流计算方法,在每一次迭代中,根据当前节点各序电压分别修正IBDG的输出电流和各不对称元件补偿电流源的输出电流,利用节点电压方程得到新的节点各序电压和故障点各序电流,直到满足收敛条件。最后,基于PSCAD/EMTDC对含IBDG不平衡配电网的进行了仿真计算,验证了所提方法的准确性和有效性。  相似文献   
2.
Soybean oil hydrogenation alters the linolenic acid molecule to prevent the oil from becoming rancid, however, health reports have indicated trans-fat caused by hydrogenation, is not generally regarded as safe. Typical soybeans contain approximately 80 g kg−1 to 120 g kg−1 linolenic acid and 240 g kg−1 of oleic acid. In an effort to accommodate the need for high-quality oil, the United Soybean Board introduced an industry standard for a high oleic acid greater than 750 g kg−1 and linolenic acid less than 30 g kg−1 oil. By combing mutations in the soybean plant at four loci, FAD2-1A and FAD2-1B, oleate desaturase genes and FAD3A and FAD3C, linoleate desaturase genes, and seed oil will not require hydrogenation to prevent oxidation and produce high-quality oil. In 2017 and 2018, a study comparing four near-isogenic lines across multiple Tennessee locations was performed to identify agronomic traits associated with mutations in FAD3A and FAD3C loci, while holding FAD2-1A and FAD2-1B constant in the mutant (high oleic) state. Soybean lines were assessed for yield and oil quality based on mutations at FAD2-1 and FAD3 loci. Variations of wild-type and mutant genotypes were compared at FAD3A and FAD3C loci. Analysis using a generalized linear mixed model in SAS 9.4, indicated no yield drag or other negative agronomic traits associated with the high oleic and low linolenic acid genotype. All four mutations of fad2-1A, fad2-1B, fad3A, and fad3C were determined as necessary to produce a soybean with the new industry standard (>750 g kg−1 oleic and <30 g kg−1 linolenic acid) in a maturity group-IV-Late cultivar for Tennessee growers.  相似文献   
3.
Evaporative phase transitions are widely present in industrial production and daily life such as thin film processes and crystal growth. The evaporation of the liquid layer and the thermocapillary convection affect each other and restrict each other, making the energy transfer mechanism of the evaporation interface very complicated. To understand the evaporation characteristics of water in its low-pressure pure vapor environment, a series of experimental studies were carried out on the temperature distributions and evaporating rate of water evaporation in the annular pool. The cylinder temperature of the annular liquid pool is controlled between 3℃ and 15℃, and the evaporation environment pressure ranges from 394 Pa to 1467 Pa, when the temperature measurement starts, the depth of water is 10 mm. The results show that the temperature of the vapor side on the liquid-vapor interface is higher than that of the liquid side and there is an obvious temperature jump across the vapor-liquid interface. With the decrease of the pressure ratio, the evaporation rate increases, and the interface temperature jump is enlarged. Meanwhile, with the increase of the distance from the cylinder, the local evaporation rate decreases, thus, the temperature jump decreases. At the same pressure ratio, as the cylinder temperature increases, the heat flux from vapor side decreases, the temperature jump decreases at all measurement points. Within the experimental controlled parameters, the maximum temperature jump obtained in the measurements is 2.56℃. Due to the coupling effect of evaporation cooling and thermocapillary convection, there is a uniform temperature layer with a thickness of about 2 mm under the evaporation interface. The thickness of the uniform temperature layer near the cylinder is always larger than that in the middle of the evaporation interface. In the uniform temperature layer, the thermocapillary convection induced by radial temperature gradient transfers heat from the cylinder to the liquid-vapor interface to compensate for the latent heat of evaporation. Below the uniform temperature layer, the temperature rises rapidly due to heat conduction and buoyancy convection.  相似文献   
4.
低压电流互感器作为电网中的关键设备,已经得到广泛使用。低压电流互感器故障诊断的在线检定也显得十分重要。提出了一种改进的全局平均池化的一维卷积神经网络(1DCNN-SVM)故障诊断模型应用于低压电流互感器在线检定。该方法改进了传统卷积神经网络(CNN)模型的结构,引入全局平均池化而不是全连接网络结构,并在测试阶段使用支持向量机(SVM)替代Softmax函数。通过进行实验分析,将所提的方法与传统的CNN进行实验对比,实验结果表明所提方法在训练时间、测试时间以及模型的测试精度等方面的表现都比传统的CNN结构模型要好。  相似文献   
5.
针对传统的压电能量采集装置固有频率高、工作频率范围窄及能量转换率低的问题,基于Timoshenko梁理论提出耦合弯曲-剪切载荷的L型压电振子,研究基于L型压电振子的复合压电结构的能量采集特性. 根据无线传感器的作业环境特点,研究L型悬臂梁的长度、宽度及延伸段长等因素对压电能量采集频率、输出电压峰值及能量转换效率的影响规律. 组合不同尺寸L型压电悬臂梁,研究设计回字形布局的阵列式复合振子. 经仿真分析与实验验证结果可知,在0~250 Hz低频环境下,能量采集频率为28~36 Hz、61~68 Hz、92~99 Hz以及103~111 Hz,较等尺寸传统阵列式压电复合振子覆盖频率平均提升了260%.  相似文献   
6.
分析了混合型有源滤波器HAPF(hybrid active power filter)在高压直流系统应用时的稳定性问题,其中HAPF采用H桥级联变换器与LC滤波器组合的方案,对高压直流系统的特征谐波电流进行滤波。为了分析在电网阻抗变化时HAPF出现的谐波谐振现象,对HAPF进行了阻抗建模,基于阻抗模型的分析结果,采用了具有延时补偿功能的谐振调节器对阻抗特性进行修正,并从提高稳定性角度提出了相应的控制参数设计方法。阻抗模型分析结果表明,控制系统延时产生的负阻尼是引发稳定性问题的主要原因,采用改进后的控制方法可以将延时产生的负阻尼修正为正阻尼,能够有效避免谐波谐振。在PSCAD中进行仿真建模,并通过阻抗扫描验证了有源滤波器的阻抗特性。仿真案例证实了控制方法的有效性。  相似文献   
7.
可控关断的电流源型换流器(current source converter,CSC)相较于LCC和VSC具有较好的技术优势,逆阻型大功率可关断半导体器件的快速发展为CSC在高压直流输电领域的应用提供了发展契机。针对现有CSC的拓扑、调制方法的优缺点进行调研和对比,分析总结出适用于高压直流输电的LCC-CSC拓扑和特定谐波消除调制方法。将基于LCC-CSC的混合直流输电系统与LCC和VSC进行多方位的对比分析,对LCC-CSC的技术优点、存在的问题及未来研究的方向进行了总结,为CSC在高压直流输电的工程应用提供前期研究基础。  相似文献   
8.
为了实现低频振动的高灵敏度测量,设计了一种基于转动支撑梁的新型光纤布拉格光栅加速度计。 通过分析其振动 模型和 MATLAB 数值计算,优化了传感器的结构参数,设计传感器理论灵敏度为 1 725 pm / g,固有频率为 68. 4 Hz。 同时通 过 COMSOL 模拟分析传感器的动态特性,其模拟结果与理论分析吻合。 频响特性和幅值特性实验结果表明光纤光栅加速度 计在加速度 0 ~ 2 g、工作频率 0. 5 ~ 20 Hz 的范围内,传感器加速度特性曲线呈现良好线性关系,灵敏度高达 1 495. 2 pm / g,重 复性良好。 该传感器结构简单紧凑,轴承结构有效减少悬臂梁振动过程中的弹性能耗,可显著提高其灵敏度,能够实现低频 振动信号的探测。  相似文献   
9.
采用扫描电镜、拉-拉疲劳试验机等研究了低温卷取热轧双相钢的显微组织及疲劳性能。结果表明:热轧双相试验钢的疲劳极限约为530 MPa;低温卷取工艺生产的热轧双相试验钢夹杂物平均尺寸多在5 μm以下,晶粒比较细小,马氏体组织较细小且弥散均匀分布,具有良好的综合力学性能。热轧双相试验钢疲劳裂纹源位于样品表面的棱角处,疲劳裂纹扩展区上有大量的韧窝、撕裂棱、疲劳辉纹和二次裂纹,瞬断区以浅韧窝为主,由于铁素体和马氏体发生不同程度的应变,最终二次裂纹在铁素体和马氏体的相界面萌生。二次裂纹虽然萌生但并未扩展,大量二次裂纹分散主裂纹尖端应力集中,可有效降低裂纹扩展的驱动力,降低疲劳裂纹扩散速率,抑制疲劳裂纹扩展,使疲劳强度得到提升。  相似文献   
10.
喷雾焙烧法是针对不锈钢混酸废液的全酸回收工艺方法,不仅可以实现废酸中游离酸的回收,还可以实现化合酸及金属元素的回收。针对青拓集团福建鼎信科技有限公司不锈钢混酸废液再生中试项目,介绍了喷雾焙烧法不锈钢混酸再生机组的技术方案、运行指标,并与引进机组进行了主要技术经济指标对比分析,各项指标均达到或超过了国外同类机组水平。同时,对该技术的进一步研究方向进行了展望。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号