虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

Robust optimal operation of continuous catalytic reforming process under feedstock uncertainty

The continuous catalytic regenerative (CCR) reforming process is one of the most significant sources of hydrogen production in the petroleum refining process. However, the fluctuations in feedstock composition and flow rate could significantly affect both product distribution and energy consumption. In this study, a robust deviation criterion based multi-objective optimization approach is proposed to perform the optimal operation of CCR reformer under feedstock uncertainty, with simultaneous maximization of product yields and minimization of energy consumption. Minimax approach is adopted to handle these uncertain objectives, and the Latin hypercube sampling method is then used to calculate these robust deviation criteria. Multi-objective surrogate-based optimization methods are next introduced to effectively solve the robust operational problem with high computational cost. The level diagram method is finally utilized to assist in multi-criteria decision-making. Two robust operational optimization problems with different objectives are solved to demonstrate the effectiveness of the proposed method for robust optimal operation of the CCR reforming process under feedstock uncertainty.     

A hybrid homogeneously weighted moving average control chart for process monitoring: Discussion

The sensitivity of a monitoring scheme depends on many factors including the variance of the charting statistic which is very important in the computation of the control limits. This paper discusses the computation of the variance of the recently proposed hybrid homogeneously weighted moving average (HHWMA) $\overline{X}$ scheme which was based on an incorrect assumption. The correct variance is used to evaluate the run-length characteristics of the HHWMA $\overline{X}$ scheme. It is observed that the incorrect variance has a significant impact on the sensitivity (or performance) of the HHWMA $\overline{X}$ scheme.     

A constrained portfolio selection model at considering risk-adjusted measure by using hybrid meta-heuristic algorithms

Portfolio selection is a key issue in the business world and financial fields. This article presents a new decision making method of portfolio optimization (PO) issues in different risk measures by using new evolutionary computing method and cardinality constrains which is mentioned as hybrid meta-heuristic algorithms. Based on mean–variance (MV) Method by Markowitz we collected three risk levels; mean absolute deviation (MAD), semi variance (SV) and variance with skewness (VWS). The developed algorithms are Electromagnetism-like algorithm (EM), particle swarm optimization (PSO), genetic algorithm (GA), genetic network programming (GNP) and simulated annealing (SA). Also a diversification mechanism strategy is implemented and hybridized with the developed algorithms to increase the diversity and overcome local optimality. The sustainability of this proposed model is verified by 50 factories on the Iranian stock exchange. Finally, experimental results of proposed algorithms with cardinality constraint are compared with each other by four effective metrics in which the algorithms performance for achieving the optimal solution discussed. In addition, we have done the analysis of variance technique to confirm the validity and accurately analyze of the results which the success of this method was proved.     

管状带式输送机在线纠扭托辊的研究与应用

管状带式输送机是一种新型环保的散状物料连续输送设备,在运行过程中受各种因素影响,头、尾过渡段经常会跑偏,管状段经常会扭转,常规停机调偏纠扭方法已不能胜任复杂路线长距离管带机稳定运行的要求。为适应市场发展趋势,设计人员分析了管带机扭转原因,结合纠扭基本原理及常规纠扭方法,新开发出一种在线(不停机)纠扭托辊并投入项目应用。     

基于改进雷达图的配电系统电能质量评估方法

本文针对配电系统电能质量综合评估存在的评估指标权重分配过于主观或客观的问题,提出一种基于改进雷达图法的配电系统电能质量评估方法。该方法利用最小偏差组合权重法计算各评估指标的最优组合权重。并在传统雷达图的基础上对各指标轴间夹角值的确定和特征向量的选取两方面做了进一步的改进。首先采用扇形区域取代原始的三角形区域,并利用最小偏差组合权重法计算各指标轴间夹角值。其次选择新的特征向量构造评估函数对配电系统电能质量进行综合评估。最后通过对某钢铁厂棒材变电站10kV配电系统电能质量进行综合评估,验证了该方法的可行性和合理性。较传统雷达图而言,改进雷达图法解决了传统雷达图法中各指标间信息共用以及评估结果不唯一的问题,使评估结果更加准确合理。     

A novel quasi-oppositional harmony search algorithm and fuzzy logic controller for frequency stabilization of an isolated hybrid power system

The intermittent wind power in isolated hybrid distributed generation (IHDG) may cause serious problems associated with frequency (f) and power (P) fluctuation. Energy storage devices such as battery, super capacitor, and superconducting magnetic energy storage (SMES) may be used to reduce these fluctuations associated with f and P. This paper presents a study of IHDG power system for improving both f and P deviation profiles with the help of SMES. The studied IHDG power system is consisted of wind turbine generator and diesel engine generator. Both f and P control problems of the studied power system model are addressed in presence or absence of SMES. Fuzzy logic based proportional–integral–derivative (PID) controller with SMES is used for the purpose of minimization of f and P deviations. The different tunable parameters of the PID controller and those of the SMES are tuned by a novel quasi-oppositional harmony search algorithm. Performance study of the IHDG power system model is carried out under different perturbation conditions. The results demonstrate minimum f and P deviations may be achieved by using the proposed fuzzy logic based PID controller along with SMES.     

轴对称弹体非定常空泡流数值仿真

在水下弹体空泡优化建模的研究中,由于弹体水下运动过程中生成的空泡形态及特性,直接影响弹体出水时的表面冲击载荷及空中弹道的稳定性,最终决定射弹打击目标的准确性.为研究弹体水下变减速运动过程中的空化现象,利用FLU-ENT的自然空化模型与动网格技术,对水下轴对称弹体的非定常空泡流进行模拟计算.结果显示,弹体在变减速运动过程中所形成空泡的主体尺寸变化规律与SCAV软件一致,非定常空泡的长度和最大直径均随着自然空化数的增加呈现先增后减的变化趋势;在初始速度一定情况下,质量越大的弹体运动速度衰减越慢,同一空化数下所形成空泡的尺寸越大.     

Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

立式退火炉张力设定模型及应用

带钢在立式退火炉内发生瓢曲、跑偏的临界张力与炉辊凸度、带钢规格都存在一定关系，但缺乏合理的定量分析方法，难以科学制定不同规格、不同钢种带钢的炉内单位张力。通过引入瓢曲风险因子BRI，可以定量地分析炉内板带瓢曲风险，从而确定冷硬板带炉内张力设定上限，即板带发生热瓢曲的临界张力σC，为连退炉加热段和冷却段的张力控制提供依据。采用该方法对连退炉加热、冷却区的张力进行了优化，应用结果表明，优化后的张力值与实测值更加吻合。