Location Related Signals with Satellite Image Fusion Method Using Visual Image Integration Method

Investigations were performed on a group utilizing (General Purpose Unit) GPU and executions were evaluated for the utilization of the created parallel usages to process satellite pictures from satellite Landsat7.The usage on a realistic group gives execution change from 2 to 18 times. The nature of the considered techniques was assessed by relative dimensionless global error in synthesis (ERGAS) and Quality Without Reference (QNR) measurements. The outcomes demonstrate execution picks ups and holding of value with the bunch of GPU contrasted with the outcomes and different analysts for a CPU and single GPU. The errand of upgrading the view of a scene by combining data caught from various picture sensors is usually known as multisensor picture combination. This paper displays a territory based picture combination calculation to consolidate SAR (Synthetic Aperture Radar) and optical pictures. The co-enlistment of the two images is first led utilizing the proposed enrollment method prior to picture combination. The paper displays a parallel execution of existing picture combination techniques on a graphical group. Parallel executions of techniques in view of discrete wavelet changes are created. Division into dynamic and motionless regions is then executed on the SAR surface picture for particular injection of the SAR picture into panchromatic (PAN) picture. An integrated image in view of these two pictures is produced by the novel region based combination plot, which forces diverse combination rules for each fragmented region. At long last, this picture is melded into a multispectral(MS) picture through the half breed skillet honing technique proposed in past research. Exploratory outcomes exhibit that the proposed strategy demonstrates preferred execution over different fusion algorithms and can possibly be connected to the multisensory combination of SAR and optical pictures.     

宇宙线缪子散射成像模拟与算法研究

本文验证了基于Micromegas探测器的宇宙线缪子散射成像系统进行快速核材料检测的可行性，并对实验室宇宙线缪子成像系统原型进行参数估算。基于Geant4程序开发了用于模拟宇宙线缪子物理过程、传输径迹及Micromegas探测器响应的模拟程序。在模拟数据的基础上，实现并改进了两种主要的宇宙线缪子散射成像算法。根据模拟和成像结果，1 m×1 m成像系统可在10 min内检测到被重元素屏蔽的核材料。10 cm×10 cm成像系统的缪子事例触发率为0.16 s^-1，要获得较为清晰的成像结果，要求探测器位置分辨率达到300 μm，探测器增益为1 000时实际测量事例至少需要20 h。     

γ射线法测量高压管束间气液两相流的截面含气率分布

在立式蒸汽发生器垂直管束间的气液两相流中，截面含气率是其中一个重要参数。使用γ射线法对高温高压下垂直管束间气液两相流截面含气率的分布规律进行了实验研究。实验压力分别为5、7、9 MPa，质量流速为300 kg/(m²?s)，热力学干度的范围为0.003 ~ 0.4。实验得到了垂直管束间截面含气率随热力学干度、体积含气率和压力的变化关系；并与经典公式的计算结果对比发现，在低干度区域，实验结果与Miropolskii模型、Smith模型和Armand模型偏差较大，均大于30%，在高干度区域偏差较小；基于Armand理论，通过多元线性回归法拟合出本文工况下平均截面含气率的计算关联式，与日本核动力工程公司(NUPEC)的实验数据偏差小于15%。本研究对蒸汽发生器的结构设计和流动特性研究具有重要意义。     

角度自适应离散纵标输运计算方法

精确的屏蔽计算方法是核装置辐射屏蔽设计的重要基础，离散纵标法(SN)是主要的屏蔽计算方法之一。本文基于价值理论的目标导向与角度自适应相结合的方法，有效地减弱了角度的离散误差。求解输运共轭方程获得目标函数的重要性分布，采用局部角度离散误差与目标函数的重要性加权，产生后验误差估计，为角度自适应过程提供判断依据。角通量密度的映射采用多项式权重法和球谐函数拟合法。数值结果表明，对于具有直孔道或曲折孔道的屏蔽问题，在相同精度下离散角度数减少了1～2个数量级，极大地减少了计算量。角度自适应方法以较少的离散方向获得了准确的计算结果，有效地减弱了角度离散误差对屏蔽计算精度的影响。     

γ射线和电子束辐照对风味豆干杀菌效果及品质的影响

为探究γ射线和电子束辐照对风味豆干微生物和理化指标影响的差异性，分别采用不同剂量的γ射线（0、3.1、5.9、8.6、11.4 kGy）和电子束（0、2.7、5.5、8.2、10.8 kGy）辐照风味豆干，研究其对风味豆干中微生物存活数、营养成分、理化指标及质构特性的影响。结果表明，γ射线和电子束辐照均能有效控制风味豆干菌落总数、霉菌及大肠菌群数，γ射线辐照杂菌和霉菌的D₁₀值分别为1.82 kGy和1.72 kGy，电子束辐照的D₁₀值分别为2.44 kGy和1.79 kGy，γ射线对风味豆干的杀菌效果强于电子束。两种辐照方式对风味豆干水分、蛋白和灰分的含量没有明显影响，但辐照后脂肪含量均显著降低。γ射线辐照后风味豆干氨基酸的含量无明显变化，但5.5 kGy剂量条件下，电子束辐照会对缬氨酸、苯丙氨酸、脯氨酸、甘氨酸、丙氨酸、酪氨酸等6种氨基酸的含量产生显著影响。γ射线辐照对风味豆干过氧化值有显著的影响，与酸价无明显的相关性；而电子束辐照与风味豆干过氧化值没有明显的相关性，但会引起其酸价显著上升。γ射线辐照不会对风味豆干硬度、内聚性、胶着性、咀嚼性和弹性产生显著影响，电子束辐照对其硬度、内聚性和胶着性的影响不显著，但5.5 kGy以上剂量辐照会对其咀嚼性和弹性产生显著的影响。综上所述，γ射线和电子束对风味豆干的辐照效应在某些方面存在一定的差异性，但均具有在豆干加工中应用的潜力，研究结果可为γ射线和电子束辐照技术在豆干加工中的应用提供理论依据。     

Some picture fuzzy Bonferroni mean operators with their application to multicriteria decision making

In this paper, we extend the Bonferroni mean (BM) operator with the picture fuzzy numbers (PFNs) to propose novel picture fuzzy aggregation operators and demonstrate their application to multicriteria decision making (MCDM). On the basis of the algebraic operational rules of PFNs and BM, we introduce some aggregation operators: the picture fuzzy Bonferroni mean, the picture fuzzy normalized weighted Bonferroni mean, and the picture fuzzy ordered weighted Bonferroni mean. Then, a new picture fuzzy MCDM method is proposed with the help of the proposed operators. Lastly, a practical application of proposed model is given to verify the developed model and related results of the proposed model is compared with the results of the existing models to indicate its applicability.     

Damage evolution around white etching layer during uniaxial loading

Rolling contact fatigue cracks and thermally induced defects are common problems in the railway industry especially as demands for increasing loads, speeds, and safety continue to rise. Often, the two types of defects are found together in the field, however, whether one causes the other to occur is not completely agreed upon. The effect of thermal damage, in the form of a martensite spot on pearlitic steel test bars, on the fatigue life in uniaxial low cycle fatigue experiments was investigated by the authors. However, the focus of the current work was to characterize the damage evolution from the low cycle fatigue (LCF) tests and correlate the crack initiation and propagation with the initial thermal damage. Residual stress measurements, digital image correlation, and X‐ray tomography were used to characterize the effects of the thermal damage before, during, and after fatigue testing, respectively. It was found that the thermal damage causes strain accumulation and crack initiation at the interface between the two materials. The strain evolution was visualized using digital image correlation (DIC), clearly showing the strain concentrations at the top and bottom of the white etching layers (WEL), where the residual stresses are also most tensile. X‐ray tomography confirmed the planar crack growth from the martensite spot.     

感悟好白酒蕴含的曼妙画卷

从白酒产区、酿酒原料、发酵容器、酿造工艺等角度解析了它们对白酒品质的影响,并揭示了好白酒内在品质应该具备的科学特性,进而彰显了“好白酒犹如一副曼妙画卷”的文化之美。     

X射线干涉光刻光束线关键光学元件热-结构耦合分析

为了保证上海光源X射线干涉光刻光束线的稳定性,减小热变形对实验结果的影响,对X射线干涉光刻光束线的3个关键光学元件——偏转镜、聚焦镜和精密四刀狭缝进行热-结构耦合分析。首先,计算偏转镜、聚焦镜和精密四刀狭缝所承载的功率密度;然后,建立其有限元模型;最后,获得光学元件的温度场和热变形的结果。结果表明,偏转镜和聚焦镜采用间接水冷方式可有效抑制热变形,冷却后的最大面形误差分别为7.2μrad和9.2μrad。精密四刀狭缝未冷却时,刀片组件温度介于271.56~273.27℃,刀口热变形为0.19 mm,直线导轨热变形为0.08 mm;经过铜辫子冷却后,刀片组件温度降至22.24~23.94℃,刀口热变形降至0.2μm,直线导轨热变形降至0.1μm;采用影像法和接触探头法测试后,刀口直线度、平行度和重复精度均满足技术要求。偏转镜、聚焦镜和精密四刀狭缝的热变形通过间接水冷和铜辫子的冷却方式可以得到很大程度的抑制,进而保证光斑质量。     

Graphite Oxide and Aromatic Amines: Size Matters

Experimental and theoretical studies are performed in order to illuminate, for first time, the intercalation mechanism of polycyclic aromatic molecules into graphite oxide. Two representative molecules of this family, aniline and naphthalene amine are investigated. After intercalation, aniline molecules prefer to covalently connect to the graphene oxide matrix via chemical grafting, while napthalene amine molecules bind with the graphene oxide surface through π–π interactions. The presence of intercalated aromatic molecules between the graphene oxide layers is demonstrated by X‐ray diffraction, while the type of interaction between graphene oxide and polycyclic organic molecules is elucidated by X‐ray photoelectron spectroscopy. Combined quantum mechanical and molecular mechanical calculations describe the intercalation mechanism and the aniline grafting, rationalizing the experimental data. The present work opens new perspectives for the interaction of various aromatic molecules with graphite oxide and the so‐called “intercalation chemistry”.