Novel branched sulfonated polyimide membrane with remarkable vanadium permeability resistance and proton selectivity for vanadium redox flow battery application

A series of novel branched sulfonated polyimide (bSPI-x) membranes with 8% branched degree are developed for application in vanadium redox flow battery (VRFB). The sulfonation degrees of bSPI-x membranes are precisely regulated for obtaining excellent comprehensive performance. Among all bSPI-x membranes, the bSPI-50 membrane shows strong vanadium permeability resistance, which is as 8 times as that of commercial Nafion 212 membrane. At the same time, the bSPI-50 membrane has remarkable proton selectivity, which is four times as high as that of Nafion 212 membrane. The bSPI-50 membrane possesses slower self-discharge speed than Nafion 212 membrane. Furthermore, the bSPI-50 membrane achieves stable VRFB efficiencies during 200-time charge-discharge cycles at 120–180 mA cm^?2. Simultaneously, the bSPI-50 membrane exhibits excellent capacity retention compared with Nafion 212 membrane. All results imply that the bSPI-50 membrane possesses good application prospect as a promising alternative separator of VRFB.     

Proton exchange membrane from the blend of poly(vinylidene fluoride) and functional copolymer: Preparation,proton conductivity,methanol permeability,and stability

A polymer electrolyte membrane is considered as the heart of fuel cells. Here we report the preparation of proton exchange membranes (PEMs) of poly (vinylidene fluoride) (PVDF) blend poly (methyl methacrylate)-co-poly (sodium-4-styrene sulfonate) (PMMA-co-PSSNa) by solvent evaporation method. Three different types of PEMs have been prepared by using different ratios of PVDF and PMMA-co-PSSNa copolymer. We have investigated the effect of concentration of PVDF on water uptake, ion exchange capacity, mechanical, thermal, and oxidative stability, proton conductivity (K^m), and methanol permeability (P_M) of the blend membranes. These blend PEMs showed good physicochemical and electrochemical properties along with thermal and oxidative stability. The membrane prepared from PVDF (45% w/w) to PMMA-co-PSSNa (55% w/w) exhibited optimum P_M at room temperature (8.38 × 10^?7 cm²s^?1). This low fuel crossover and high relative selectivity can make our prepared blend membranes a potential candidate in polymer electrolyte membrane fuel cells (PEMFCs) or direct methanol fuel cells (DMFCs).     

25CN-NBOH: A Selective Agonist for in vitro and in vivo Investigations of the Serotonin 2A Receptor

4-(2-((2-hydroxybenzyl)amino)ethyl)-2,5-dimethoxybenzonitrile (25CN-NBOH) was first reported as a potent and selective serotonin 2A receptor (5-HT_2AR) agonist in 2014, and it has since found extensive use as a pharmacological tool in a variety of in vitro, ex vivo and in vivo studies. 25CN-NBOH is readily available from a synthetic perspective using standard chemical transformations, and displays favorable physiochemical properties in terms of stability and solubility. Due to its superior selectivity for 5-HT_2AR, 25CN-NBOH has been used to investigate the effects of selective 5-HT_2AR activation in vivo, and has thus become an important pharmacological tool for the exploration of 5-HT_2AR signaling in a range of animal models. In the present review, we outline the discovery of 25CN-NBOH, its pharmacological profile and major findings from studies where it has been used.     

Et-Ph-BCTABipy的合成及其对Pd2+的萃取性能

合成了N，N′-二乙基-N，N′-二苯基-［2，2′-联吡啶］-6，6′-二硫代酰胺(Et-Ph-BCTABipy)萃取剂，并利用¹³C NMR和¹H NMR对其进行了表征；研究了相接触时间、萃取剂浓度、水相初始酸度和Pd²⁺浓度等因素对Et-Ph-BCTABipy萃取Pd²⁺性能的影响，利用摩尔比法确定了Et-Ph-BCTABipy与Pd²⁺所形成的配合物组成；同时，在Ln(Ⅲ)与Pd²⁺共存体系中研究了Et-Ph-BCTABipy对Pd²⁺的萃取选择性。结果表明：Et-Ph-BCTABipy在HNO₃体系中对Pd²⁺具有较强的萃取性能和较高的萃取选择性；萃取过程中Et-Ph-BCTABipy与Pd²⁺以1∶2的比例结合，其萃取平衡常数K_ex=3.42×10⁶。     

Preparation of Docosahexaenoic Acid-Rich Diacylglycerol-Rich Oil by Lipase-Catalyzed Glycerolysis of Microbial Oil from Schizochytrium sp. in a Solvent-Free System

Docosahexaenoic acid (DHA)-rich diacylglycerol (DAG)-rich oil was prepared by lipase-catalyzed glycerolysis of microbial oil from Schizochytrium sp. in a solvent-free system. The reaction parameters including lipase type, substrate molar ratio, temperature, lipase concentration, and reaction time were screened. The selected conditions were determined as follows: Novozym® 435 (Novozymes A/S, Bagsvaerd, Denmark) as biocatalyst at 8 wt%, substrate ratio (DHA-rich microbial TAG/glycerol) of 1:1 mol/mol, temperature of 50 °C, and reaction time of 12 hours. Under these conditions, the triacylglycerol (TAG), DAG, and monoacylglycerol (MAG) contents in the product were 36.4%, 48.2%, and 15.4%, respectively. The lipase was reused successively for 18 cycles without significant loss of activity under the conditions given above. Fatty acid composition analysis of the final product showed that the contents of DHA in TAG, DAG, and MAG were 53.9%, 44.9%, and 34.8%, respectively. DHA-rich DAG has the potential to be used as an ingredient in infant formula to increase the bioavailability of DHA.     

Peptidyl Vinyl Ketone Irreversible Inhibitors of Rhodesain: Modifications of the P2 Fragment

In this paper, we report the design, synthesis and biological investigation of a series of peptidyl vinyl ketones obtained by modifying the P2 fragment of previously reported highly potent inhibitors of rhodesain, the main cysteine protease of Trypanosoma brucei rhodesiense. Investigation of the structure–activity relationship led us to identify new rhodesain inhibitors endowed with an improved selectivity profile (a selectivity index of up to 22 000 towards the target enzyme), and/or an improved antitrypanosomal activity in the sub-micromolar range.     

Selective Binding of Cyclodextrins with Leflunomide and Its Pharmacologically Active Metabolite Teriflunomide

The selectivity of encapsulation of leflunomide and teriflunomide by native α-, β- and γ-cyclodextrins was investigated through ¹H NMR and molecular modeling. Thermodynamic analysis revealed the main driving forces involved in the binding. For α-cyclodextrin, the partial encapsulation was obtained while deep penetration was characterized for the other two cyclodextrins, where the remaining polar fragment of the molecule is located outside the macrocyclic cavity. The interactions via hydrogen bonding are responsible for high negative enthalpy and entropy changes accompanying the complexation of cyclodextrins with teriflunomide. These results were in agreement with the molecular modeling calculations, which provide a clearer picture of the involved interactions at the atomic level.     

Ca-Mg-Al复合氧化物催化尿素与1,2-丙二醇制碳酸丙烯酯

采用共沉淀法制备了系列Ca-Mg-Al复合氧化物催化剂，通过对沉淀剂配比、沉淀液pH值及焙烧温度等制备条件的考察，得到以Na₂CO₃为沉淀剂、pH=9.5、850℃下焙烧4h制备的Ca-Mg-Al催化活性最高。在 n(PG)∶n(urea)=1.5∶1、反应温度为145℃、绝压20kPa、反应时间4h、催化剂用量为尿素质量的5%时，碳酸丙烯酯收率达到84.6%。采用XRF、XRD、NH₃-TPD、SEM及BET对催化剂的组成、晶型及酸性进行了表征，发现随着沉淀剂中Na₂CO₃的含量增加，催化剂中CaO∶MgO的比例增大，碳酸丙烯酯的收率亦升高；经850℃焙烧后，催化剂中存在CaO和MgO两种活性中心，起协同催化作用；随着焙烧温度由700℃升高到850℃，NH₃-TPD脱附曲线向低温方向偏移，且强酸中心NH₃脱附峰面积比由81.14%明显下降为0，中强酸中心NH₃脱附峰面积比由0增加到78.07%，而碳酸丙烯酯收率由68%增加到84.6%，这表明催化剂强酸性位的减少是催化活性增加的主要原因。     

超支化镍系催化剂构效关系及催化乙烯齐聚机理

采用1.0G超支化大分子（1.0G）、3-取代水杨醛和NiCl₂·6H₂O为原料，依次经席夫碱反应和络合反应合成了3种新型具有不同取代基位阻的超支化水杨醛亚胺配体及其镍系催化剂，利用红外光谱（FTIR）、核磁共振氢谱（¹H NMR）、紫外光谱（UV-vis）、电喷雾质谱（ESI-MS）及电感耦合等离子体质谱（ICP-MS）等方法对合成出产物的结构进行表征。考察了配体空间位阻、溶剂种类、助催化剂种类及反应条件对催化乙烯齐聚性能的影响。研究结果表明，配体空间位阻对催化乙烯齐聚性能有较大的影响，当以甲苯为溶剂、甲基铝氧烷（MAO）为助催化剂，在最佳反应条件下，超支化邻苯基水杨醛亚胺镍系催化剂催化乙烯齐聚的活性为2.81×10⁵g/(mol Ni·h)，对高碳烯烃（C₁₀₊）的选择性为34.28%。此外，在超支化水杨醛亚胺镍系催化剂催化性能评价的基础上，对其催化乙烯齐聚的机理进行研究。     

Reactivity,Selectivity, and Stability of Zeolite-Based Catalysts for Methane Dehydroaromatization

Non-oxidative dehydroaromatization is arguably the most promising process for the direct upgrading of cheap and abundant methane to liquid hydrocarbons. This reaction has not been commercialized yet because of the suboptimal activity and swift deactivation of benchmark Mo-zeolite catalysts. This progress report represents an elaboration on the recent developments in understanding of zeolite-based catalytic materials for high-temperature non-oxidative dehydroaromatization of methane. It is specifically focused on recent studies, relevant to the materials chemistry and elucidating i) the structure of active species in working catalysts; ii) the complex molecular pathways underlying the mechanism of selective conversion of methane to benzene; iii) structure, evolution and role of coke species; and iv) process intensification strategies to improve the deactivation resistance and overall performance of the catalysts. Finally, unsolved challenges in this field of research are outlined and an outlook is provided on promising directions toward improving the activity, stability, and selectivity of methane dehydroaromatization catalysts.