超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

An active balancer with rapid bidirectional charge shuttling and adaptive equalization current control for lithium-ion battery strings

This article proposes an active balancer, which features bidirectional charge shuttling and adaptive equalization current control, to fast counterbalance the state of charge (SOC) of cells in a lithium-ion battery (LIB) string. The power circuit consists of certain bidirectional buck-boost converters to transfer energy among the different cells back and forth. Owing to the characterization of the open-circuit voltage (OCV) vs SOC in LIB being relatively smooth near the SOC middle range, the SOC-inspected balance strategy can achieve more precise and efficient equilibrium than the voltage-based control. Accordingly, a compensated OCV-based SOC estimation is put forward to take into account the discrepancy of SOC estimation. Besides, the varied-duty-cycle (VDC) and curve-fitting modulation (CFM) methods are devised herein to tackle the problems of slow equalization rate and low balance efficacy, which arise from the diminution in balancing current as the SOC difference between the cells decreases in the later duration of equalization especially. The proposed strategies have taken the battery nonlinear characteristic and circuit parameter nonideality into account and can adaptively modulate the duty cycle with the SOC difference to keep balancing current constant throughout the balancing cycle. Simulated and experimental results are given to demonstrate the feasibility and effectiveness of the same prototype constructed. Compared with the fixed duty cycle and the VDC methods, the proposed CFM has the best balancing efficiency of 81.4%, and the balance time is shortened by 27.1% and 18.6%, respectively.     

基于多通道的ICU脑血管疾病死亡风险预测模型

死亡风险预测指根据病人临床体征监测数据来预测未来一段时间的死亡风险。对于ICU病患，通过死亡风险预测可以有针对性地对病人做出临床诊断，以及合理安排有限的医疗资源。基于临床使用的MEWS和Glasgow昏迷评分量表，针对ICU病人临床监测的17项生理参数，提出一种基于多通道的ICU脑血管疾病死亡风险预测模型。引入多通道概念应用于BiLSTM模型，用于突出每个生理参数对死亡风险预测的作用。采用Attention机制用于提高模型预测精度。实验数据来自MIMIC [Ⅲ]数据库，从中提取3?080位脑血管疾病患者的16?260条记录用于此次研究，除了六组超参数实验之外，将所提模型与LSTM、Multichannel-BiLSTM、逻辑回归（logistic regression）和支持向量机（support vector machine, SVM）四种模型进行了对比分析，准确率Accuracy、灵敏度Sensitive、特异性Specificity、AUC-ROC和AUC-PRC作为评价指标，实验结果表明，所提模型性能优于其他模型，AUC值达到94.3%。     

用于电弧检测的电力专用SoC设计

针对传统的电弧电路故障检测结果不准确的问题,设计用于电弧检测的SoC系统,并且在55nm工艺下进行流片验证。采用包含两种结构的模数转换器的片上电压源,设计了锁相环以及复位电路,精度最高可达8.67 bit。验证结果表明,本设计可提高电弧检测的准确性。     

Single-switch boost-buck DC-DC converter for industrial fuel cell and photovoltaics applications

The realization of dc-dc converters performs a vital function in exploiting renewable energy sources such as solar photovoltaic (PV) and fuel cell applications. This paper demonstrates a single-switch unidirectional buck-boost dc-dc converter for continuous power flow control, excluding the hybrid switched-capacitor. The proposed converter utilizes a limited number of passive components, only four diodes and three inductors required, in addition to six capacitors. The converter can operate at a wide input voltage range with continues input current. The converter has experimented under real-time conditions with 660 W PV system. The obtained efficiency ranges from 93% to 98%. Furthermore, the converter has interfaced with 550 W fuel cell operated under different fuel pressure. The realized efficiency ranges from 91% to 97%. The maximum measured inductance current ripple is limited to under 0.70 A in both scenarios, whereas 0.16 V is the maximum output voltage ripple.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

基于k-shell的复杂网络最短路径近似算法

复杂网络最短路径经典算法的处理效率较低，不适用于大规模复杂网络，而现有近似算法通用性有限，且计算准确率不理想，不能满足规模日益扩大的复杂网络中的最短路径计算需求。针对于此，提出基于[k]-shell的复杂网络最短路径近似算法。算法利用节点的[k]-shell值进行网络划分并引导搜索路径，利用超点聚合处理[k]-shell子网来降低路径搜索中节点和连边的规模，通过在路径搜索过程使用双向搜索树方法提高算法的计算效率和准确率。实验结果表明，算法通用性较好，在现实与仿真大规模复杂网络中均具有较高的计算效率和准确率。     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

Performance enhancement of energy extraction capability for fuel cell implementations with improved Cuckoo search algorithm

This paper addresses an improved optimization method to enhance the energy extraction capability of fuel cell implementations. In this study, the proposed method called Dynamic Cuckoo Search Algorithm (DCSA) is tested in a stand-alone fuel cell in order to control the system power under dynamic temperature response. In the operational process, a fuel cell is connected to a load through a dc-dc boost converter, and DCSA is utilized to adjust the switching duration in dc-dc converter by using voltage, current and temperature parameters. In this way, it controls the output voltage to maximize power delivery capability at the demand-side and eliminates the drawback of conventional cuckoo search algorithm (CSA) which cannot change duty cycle under operating temperature variations. In this regard, DCSA shows a significant improvement in terms of system response and achieves a more efficient power extraction than the conventional CSA method. In order to demonstrate the system performance, the stand-alone fuel cell system is constructed in Simulink environment via a processor-in the-loop (PIL) based digital implementation and analyzed by using different optimization methods. In the analysis section, the results of the proposed method are compared with conventional methods (perturb&observe mppt, incremental conductance mppt, and particle swarm optimization). In this context, convergence speed and efficiency analysis for both methods verify that the DCSA gives original results compared to conventional methods.     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。