An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

双接触器型三相异步电动机Y-△降压启动电路

提出并试验了一种使用2个接触器的三相异步电动机Y-△降压启动电路,该Y-△降压启动电路比传统电路节省1个接触器。试验结果表明其可以应用于老设备维修改造和新设备设计中。     

Gas hold-up in highly viscous pseudoplastic non-newtonian solutions in three phase sparged reactors

Gas hold-up structure was studied in a three phase sparged reactor of 200 mm diameter. Air and aqueous solutions of carboxymethyl cellulose were used as gas and liquid phases. Spherical glass beads formed the solid phase. The superficial gas velocity, rheological properties, particle size and solid loading were varied over a wide range and their effects on gas hold-up structure were studied. A correlation for the estimation of the gas hold-up as a function of superficial gas velocity, apparent liquid viscosity, particle settling velocity and solid loading was established.     

Measurement of longitudinal distribution of solids holdup in a three-phase fluidized bed by ultrasonic technique

A method of measurement of solids holdup in a three-phase reactor by analyzing the shape and the phase lag or lead of an ultrasonic wave has been proposed. The solids holdup in a solids-dilute three-phase fluidized bed could be measured without being affected by the presence of gas bubbles. The experimental values of solids axial dispersivity measured by the ultrasonic technique are in reasonable agreement with an empirical correlation of previous data obtained by other methods. The possibility of the application of the ultrasonic technique to the measurement of solids holdup in a three-phase fluidized bed has been suggested.     

倾斜下降管内油气水三相流流型转变的实验研究

对倾斜下降管倾角变化对油气水三相流流型转变的影响进行了研究 ,通过大量实验得到流型图 ,发现倾角对流型转变有重大影响 :倾角增大到 3 0°时 ,增大气流量 ,泡状流已不再转变为间歇流 ,而是分层流 ;倾角变化对环状流和间歇流之间的转变影响显著。得到的界限方程规律与实验现象及流型图符合良好     

Gas-liquid mass transfer in three-phase fluidized beds with viscous pseudoplastic liquids

Liquid phase volumetric mass transfer coefficients for oxygen were determined in three-phase fluidized beds of 8 mm glass spheres fluidized by a cocurrent flow of air and pseudoplastic polysaccharide solutions (carboxymethyl cellulose, xanthan). A semi-theoretical relation for the effective shear rate was suggested. The mass transfer coefficients could be correlated, together with literature data for particle diameters of 3 mm and 5 mm in other liquids, using the terminal velocity as the particle-specific property.     

Mass transfer between solid particles and liquid in a three phase fluidized bed

Particle-liquid mass transfer in a co-current three-phase fluidized bed of glass beads, water and air was studied with two measurement techniques. Both techniques measured the weight loss of a few particles coated with benzoic acid in a bed of inert glass beads. The effects of liquid and gas velocities, gas distribution and surface active agents on particle-liquid mass transfer in a three-phase fluidized bed were thus determined. In the absence of surface active agents in the liquid, particle-liquid mass transfer rates in a three-phase fluidized bed were up to 30% higher than in the corresponding liquid fluidized bed. When surface active agents were added to the liquid, the particle-liquid mass transfer rate was increased by up to about 100% in the three-phase fluidized bed, relative to the liquid fluidized bed. The particle-liquid mass transfer coefficient was found to be inversely proportional to the liquid hold-up in the three-phase fluidized bed.     

A Sedimentation-Dispersion Model for both Non-attached and Attached Particles in Three-Phase Batchwise Fluidized Beds

The axial concentration distribution of both particles with better wetting (forming non-attached system) and poorer wetting (forming attached system) was investigated in a vertical gas-liquid-solid fluidized bed of 4.2 cm in diameter and 130 cm in height with the solids holdup less than 0.05. The one-dimensional sedimentation-dispersion model could be used satisfactorily to describe the axial distribution of solids holdup by modifying only a model parameter, i.e. by means of the terminal settling velocity minus a certain value, which is a function of gas velocity and considers the effect of an additional drag force resulted from attached rising bubbles. The axial profiles of solid concentration predicted are in good agreement with experimental results. This model also explains reasonably the different axial distributions of solid concentration, i.e. the solids holdup decreases as the axial height increases in non-attached system, but increases with the axial height in attached system at a given gas veloc     

铁路钢轨接续线爆压冷焊技术

介绍了利用爆压冷焊技术研制开发的一种新型的“爆压冷焊式钢轨接续线技术”的设计原则、设计方案，焊接效果及技术性能。     

大功率电机控制器和驱动器测试装置的研究

论文介绍了大功率三相无刷电机信号控制器LHB541和无刷电机功率驱动器LHB542测试原理和方法。利用数字电路设计了一种三相方波信号发生装置,考虑到被测器件的功率及测试效率及可靠性而设计制作了相应的测试装置。从而满足了LHB541和LHB542各项参数测试的要求,同时为类似大功率器件测试提供了一种技术参考。