Impact of defects on the decomposition of chemical warfare agent simulants in Zr-based metal organic frameworks

Metal organic frameworks (MOFs) containing zirconium secondary building units (SBUs) in UiO-67 and related MOFs, are highly active for neutralizing both the chemical warfare agents and simulants, such as dimethyl methylphosphonate (DMMP). However, two recent publications gave conflicting reports of DMMP reaction with UiO-67 under ultra high vacuum (UHV) conditions, with one reporting chemisorption and reaction (Wang et al., J Phys Chem C, 2017, 121, 11261–11272) and the other reporting only physisorption and reversible desorption (Ruffley et al., J Phys Chem C, 2019, 123, 19748–19758) from very similar temperature programmed desorption experiments. We show that the discrepancy between these experiments may be explained by different levels of missing linker defects in the UiO-67 samples. We present density functional theory calculations showing that SBU sites having two-adjacent missing linkers exhibit reaction barriers that are about 30 kJ/mol lower than SBU sites having a single missing linker. We also show that topology of the undercoordinated sites plays an important role in the reaction barrier under UHV conditions.     

Boron doping induced electronic reconfiguration of Fe-Nx sites in N-doped carbon matrix for efficient oxygen reduction reaction in both alkaline and acidic media

Developing non-precious metal-based catalysts as the substitution of precious catalysts (Pt/C) in oxygen reduction reaction (ORR) is crucial for energy devices. Herein, a template and organic solvent-free method was adopted to synthesize Fe, B, and N doped nanoflake-like carbon materials (Fe/B/N–C) by pyrolysis of monoclinic ZIF-8 coated with iron precursors and boric acid. Benefiting from introducing B into Fe–N–C, the regulated electron cloud density of Fe-N_x sites enhance the charge transfer and promotes the ORR process. The as-synthesized Fe/B/N–C electrocatalyst shows excellent ORR activity of a half-wave potential (0.90 V vs 0.87 V of Pt/C), together with superior long-term stability (95.5% current density retention after 27 h) in alkaline media and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.74 V vs 0.82 V of Pt/C) in an acidic electrolyte. A Zn-air battery assembled with Fe/B/N–C as ORR catalyst delivers a higher open-circuit potential (1.47 V), specific capacity (759.9 mA h g^?1_Zn at 10 mA cm^?2), peak power density (62 mW cm^?2), as well as excellent durability (5 mA cm^?2 for more than 160 h) compared to those with commercial Pt/C. This work provides an effective strategy to construct B doped Fe–N–C materials as nonprecious ORR catalyst. Theoretical calculations indicate that introduction of B could induce Fe-N_x species electronic configuration and is favorable for activation of OH1 intermediates to promote ORR process.     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.     

基于FAHP的机械振动WSN均衡拓扑构建方法

针对机械振动无线传感器网络因拓扑不均衡导致传输时延和网络传输能耗增加的问题,提出了一种基于模糊层次分析(fuzzy analytic hierarchy process,简称FAHP)的均衡拓扑构建方法,该方法由构建模糊判断矩阵和计算权重向量组成。首先,传感器节点进行簇内通信获取信标广播信息,将信标节点网络决策因子统一量纲化,利用网络决策因子构建模糊判断矩阵;其次,检验模糊判断矩阵一致性,采用行和归一化处理或拉格朗日最小二乘法计算权重向量;最后,传感器节点通过权重向量计算出各个信标节点综合权值,关联最优信标节点为父节点加入网络,将提出的模糊层次分析拓扑构建方法与基于链路质量单准则构建网络拓扑机制进行对比。实验结果表明,该方法能有效改善传输时延和机械振动无线传感器节点网络寿命。     

Cross-fertilization for routine reconfiguration in IT-enabled organizational transformation

Routine reconfiguration is a key challenge for IT-enabled organizational transformation projects. However, how to successfully reconfigure existing routines remains unclear. This case study explores how to achieve routine reconfiguration in IT-enabled organizational transformation and suggests that routine reconfiguration can be achieved through the cross-fertilization of business domain knowledge. We identified a process model of cross-fertilization of business domain knowledge, which essentially incorporates three key processes (i.e., knowledge combination, reflection, and experimentation) and indicates that cross-fertilization can bring changes to all three types of trajectory components. The theoretical and practical implications of this study are also discussed.     

An engineering method for complex structural optimization involving both size and topology design variables

This work presents an engineering method for optimizing structures made of bars, beams, plates, or a combination of those components. Corresponding problems involve both continuous (size) and discrete (topology) variables. Using a branched multipoint approximate function, which involves such mixed variables, a series of sequential approximate problems are constructed to make the primal problem explicit. To solve the approximate problems, genetic algorithm (GA) is utilized to optimize discrete variables, and when calculating individual fitness values in GA, a second-level approximate problem only involving retained continuous variables is built to optimize continuous variables. The solution to the second-level approximate problem can be easily obtained with dual methods. Structural analyses are only needed before improving the branched approximate functions in the iteration cycles. The method aims at optimal design of discrete structures consisting of bars, beams, plates, or other components. Numerical examples are given to illustrate its effectiveness, including frame topology optimization, layout optimization of stiffeners modeled with beams or shells, concurrent layout optimization of beam and shell components, and an application in a microsatellite structure. Optimization results show that the number of structural analyses is dramatically decreased when compared with pure GA while even comparable to pure sizing optimization.     

折臂式随车起重机转台的拓扑优化设计

为了使折臂式随车起重机转台在最大应力不超过材料许用应力的前提下实现轻量化设计的目的,通过ADAMS软件仿真确定其极限工况,对转台进行静力学分析及拓扑优化。通过拓扑优化得到了理想的材料分布。基于优化结果调整转台结构,并对改进后的转台进行静力学分析。结果表明,优化后的转台能够满足实际的使用需求。同时,转台质量降低了12%,证明了优化设计的有效性和可行性,并为折臂式随车起重机的相关设计提供了一定的借鉴。     

Void region restriction for additive manufacturing via a diffusion physics approach

A longstanding challenge in additive manufacturing (AM), the presence of void regions in additively manufactured components, causes two main issues: the enclosing of build material powder in powder bed fusion techniques and limiting tool access in critical post-processing operations to remove sacrificial support structures. As topology optimization has embraced and overcome many of the obstacles of incorporating AM constraints into the underlying numerical optimization statement, there exist few solutions that directly address this fundamental void region issue. By developing computationally efficient and effective solutions to this problem, the integration of these two advanced technologies can be fully realized. Drawing on inspiration from the principles of diffusion physics, a particle diffusion void restriction (PDVR) method is presented in this work that is capable of encouraging the optimization scheme to generate final designs that are fully accessible. Additionally, this method empowers the user to choose the type of post-processing method to clear support material (eg, three-axis or five-axis milling operations, number and orientation of part set-ups) and, therefore, quantify the level of costs associated with the post-processing operation. The PDVR optimization framework is demonstrated on multiple two- and three-dimensional test problems, with physically manufactured examples depicting the real-world benefits this method admits.     

An interpretative structural modeling based network reconfiguration strategy for power systems

The network reconfiguration is an important stage of restoring a power system after a complete blackout or a local outage. Reasonable planning of the network reconfiguration procedure is essential for rapidly restoring the power system concerned. An approach for evaluating the importance of a line is first proposed based on the line contraction concept. Then, the interpretative structural modeling (ISM) is employed to analyze the relationship among the factors having impacts on the network reconfiguration. The security and speediness of restoring generating units are considered with priority, and a method is next proposed to select the generating unit to be restored by maximizing the restoration benefit with both the generation capacity of the restored generating unit and the importance of the line in the restoration path considered. Both the start-up sequence of generating units and the related restoration paths are optimized together in the proposed method, and in this way the shortcomings of separately solving these two issues in the existing methods are avoided. Finally, the New England 10-unit 39-bus power system and the Guangdong power system in South China are employed to demonstrate the basic features of the proposed method.