Predictions and Analyses on the Growth Behavior of Oxide Scales Formed on Ferritic–Martensitic in Supercritical Water

Oxidation of Metals - For 9–12Cr ferritic–martensitic steels in supercritical water, the dependencies of the thicknesses of three oxide layers (diffusion, inner, and outer layers) on...     

Characteristics of Fluid Flow and Heat Transfer in the Shell Side of the Trapezoidal-like Tilted Baffles Heat Exchanger

Periodic whole cross-section computation models are established for segmental baffle heat exchanger, shutter baffle heat exchanger, and trapezoid-like tilted baffle heat exchanger. The reliability of models is verified by comparing the simulated results to the results obtained from the Bell-Delaware method. Due to the orthogonal assembly of the baffles, the shell side fluid shows the twisty flow of trapezoid-like tilted baffle heat exchanger. The essential mechanism on disturbing flow and heat transfer enhancement is revealed by defining the non-dimensional factor η of the shell side fluid flow direction of heat exchanger and the field synergy principle. The results show that at the same Reynolds number, the shell side fluid convection heat transfer coefficient of trapezoid-like tilted baffle heat exchanger is 12.43%-24.33% and 6.71%-11.51% higher than those of segmental baffle heat exchanger and shutter baffle heat exchanger, respectively. The shell side fluid flow velocity field and the pressure gradient field of trapezoid-like tilted baffle heat exchanger and shutter baffle heat exchanger decreases compared with that of segmental baffle heat exchanger, so the shell side fluid flow resistance and pressure drop is increased; the shell side comprehensive performance of trapezoid-like tilted baffle heat exchanger is 5.85%-9.06% higher than that of segmental baffle heat exchanger, and 15.27%-23.28% higher than that of shutter baffle heat exchanger. In this study, a baffle structure with higher efficiency of the energy utilization for the heat exchanger is provided.     

生物甘油基聚酯对大豆分离蛋白复合膜贮藏期间机械性能稳定性的影响

以大豆分离蛋白(soybean protein isolate,SPI)为主要原料,将甘油进行改性后制备的生物甘油基聚酯加入到成膜液中制备SPI复合膜,通过对贮藏期间SPI复合膜机械性能、水分含量和甘油迁出率进行跟踪测定,比较分析甘油经改性后制备的增塑剂对SPI复合膜的机械性能稳定性、保水性、甘油迁出率稳定性及微观结构的影响。研究结果表明:与未改性甘油增塑的SPI复合膜相比,改性后制备的机械性能稳定性最高的SPI复合膜为生物甘油基聚酯(生物聚甘油和脂肪酸的质量比为1∶1)增塑的复合膜,其拉伸强度稳定性提高了18.08%,断裂延伸率稳定性提高了34.52%,水蒸气透过系数稳定性提高了14.68%,水分含量稳定性提高了17.02%,甘油迁出率稳定性提高了74.28%,膜体系的紧密性和连续性增强,且其表面形成了致密的空间网状结构。生物甘油基聚酯的添加一定程度上提高了SPI复合包装薄膜的机械性能稳定性,为其更广泛的实际应用提供了重要的理论参考和技术支持。     

偶联剂对PLA/PBAT/WF复合材料3D打印性能的影响

以聚乳酸（PLA）和聚己二酸/对苯二甲酸丁二酯（PBAT）为基体，杨木粉（WF）为填充增强材料，使用混炼机熔融共混制备PLA/PBAT/WF复合材料，采用熔融沉积成型（FDM）技术制备标准实验试样，通过扫描电子显微镜、红外光谱分析、旋转流变测试以及力学试验等方法，研究不同含量的硅烷偶联剂KH550对PLA/PBAT共混物以及PLA/PBAT/WF的相容性、流变性及力学性能的影响。结果表明，在偶联剂用量为3 %（质量分数，下同）时，拉伸强度提高了136 %；偶联剂KH550与 PLA和PBAT共价键偶联生成接枝聚合物，二者相容性得到提高；同时偶联剂与WF表面羟基发生缩聚反应有效的改善了其与PLA/PBAT的基体相容性，PLA/PBAT/WF复合材料的FDM的制件力学性能得到较大提升；复合材料的黏度随偶联剂含量的增加呈下降的趋势，含量为3 %时线材的综合打印性能及制品质量最佳。     

Facile Fabrication of Cellulosic Paper-based Composites with Temperature-controlled Hydrophobicity and Excellent Mechanical Strength

In this paper,we presented a novel strategy to employ a plantderived carbohydrate polymer,i.e.,cellulose,to prepare a hydrophobic composite.Cellulose was used as a scaffold,and ethylene-propylene side by side(ES)fiber was thermally melted and then coated on the cellulose surface to achieve hydrophobicity.Experimental results revealed that the thermocoating ES fibers greatly increased the water contact angle of the cellulose scaffold from 25°to 153°while simultaneously enhanced the wet tensile strength of the composite approximately 6.7-fold(drying temperature of 170℃)compared with the pure cellulose paper.In particular,compared with other related research,the prepared cellulose-based composite possessed excellent hydrophobicity and superior mechanical strength,which introduces a new chemical engineering approach to prepare hydrophobic cellulose-based functional materials.     

基于α-FeOOH催化H2O2蒸气的低温烟气脱硝实验

针铁矿是分布广泛、储量丰富的铁氧化物，其主要成分为α-羟基氧化铁（α-FeOOH）。为了探究针铁矿在催化H₂O₂烟气脱硝反应中的性能，本文通过沉淀-水解法制备了α-FeOOH，并在自行搭建的实验台上开展了α-FeOOH催化H₂O₂的低温烟气脱硝实验研究，深入分析了H₂O₂流量、H₂O₂浓度、汽化温度、反应温度和共存气体浓度等工况参数对脱硝性能的影响。采用离子色谱（IC）分析了单独脱硝反应和同时脱硫脱硝反应后的含氧酸成分，结合各项表征分析技术考察了催化剂反应前后的理化特性和稳定性。实验结果显示，随着汽化温度和反应温度的升高，NO的脱除效率先增加后降低；增加H₂O₂浓度对脱硝效率有明显的促进作用。当汽化温度为140℃、反应温度为160℃时，以2.5mL/h注入10mol/L的H₂O₂脱硝效率达到80%。当SO₂浓度为1000μL/L时，脱硝效率提高至86.4%。离子色谱分析结果显示，单独脱硝反应和同时脱硫脱硝反应后含氧酸产物为HNO₃和H₂SO₄。反应前后催化剂的表征结果显示，α-FeOOH在脱硝反应后依然具有良好的稳定性，显示出针铁矿在低温烟气脱硝工艺中的潜在应用前景。     

面向球幕投影系统的几何校正方法

摘 要：用于飞行模拟的视景仿真系统，经常会以多台投影仪同步投影以得到较大范围的 视场角。当投影机斜对屏幕或者投影屏幕为曲面时，图像会发生几何失真。针对此问题，本文 提出了一种专门面向球幕投影系统的几何校正方法，并以一个三通道显示系统为实例，详述了 该方法的理论原理以及校正流程。实例结果表明，经几何校正后，各投影图像无几何畸变，通 道过渡处几何内容完全一致。该方法是一种纯软件方法，成本小而且操作简单，能够适应于不 同的投影场景。     

[可靠性建模及试验技术]重型机床液压元件油液污染退化量分布剖面可靠性建模

针对重型机床液压系统故障频繁且多与油液中的固态颗粒污染物相关的问题，进行了油液污染趋势变化试验。通过时域分析获得了油样颗粒数的有量纲和量纲一参数，通过Q-Q图和K-S检验分析有量纲参数，污染颗粒数是退化量服从正态分布的退化数据。进行了油液污染与环境相关性分析试验，采用相关系数法分析得到，颗粒数变化量与一定范围内的温度、流量、压力的相关性小；将液压元件分为管路、阀、过滤器三类，用直径5 μm左右的颗粒和直径大于15 μm的颗粒分别研究管路及阀件的堵塞和磨损情况，以过滤器过滤精度大小的颗粒研究过滤器的堵塞情况，设定ISO4406标准20/17级对应的颗粒数为阈值，利用退化量分布建立了液压元件单一故障模式的可靠性模型；利用竞争失效模型将上述模型融合为多故障模式下的可靠性模型。