Wall Rock Alteration,Uranium Mineralization,and Potentiality of Uranium and Iron Dissolution from Mineralized Abu Rusheid Gneiss Rock,South Eastern Desert,Egypt

Radiochemistry - Ferrugination, sericitization, desulfitization, chloritization, and kaolinitization of hydrothermal origin are the main wall rock alterations occurring within the NNW shear zones...     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

Regression of severe atherosclerotic plaque in patients with mild elevation of LDL cholesterol

BACKGROUND: Intensive risk factor reduction in patients with dyslipidemias and coronary atherosclerosis has been shown to result in alterations in coronary artery morphology and reduced clinical events. However, the impact of such interventions in populations with relatively normal levels of low-density lipoproteins (LDL) is unclear. METHODS: To test the hypothesis that intensive risk factor reduction results in angiographic regression in patients with only mildly elevated levels of LDL, 14 patients with angiographically proven coronary atherosclerosis were entered into the University of California Davis Coronary Artery Disease Regression Program and intensively treated with pharmacologic and nonpharmacologic interventions for 2 years. Quantitative angiography was performed prior to and after 2 years of therapy to determine changes in coronary artery diameter. RESULTS: As a result of this program, dietary fat intake was reduced by 58% and LDL fell from 120 +/- 7 mg/dL to 104 +/- 6 mg/dL (p = 0.05). The average diameter of the measured arterial locations (including all 53 stenoses and 292 nondiscrete regions) on study entry was 2.74 +/- 0.05 mm. After 24 months, there was a net increase in arterial diameter (regression) of +0.05 +/- 0.04 mm to 2.81 +/- 0.05 mm (p = 0.01). While there was no significant change in the average diameter of discrete stenoses, all 8 lesions > or = 50% initial diameter narrowing regressed, with a mean diameter change of + 0.2 mm. Conversely, only 1 of 8 mild lesions < or = 20% regressed, while 4 progressed. Intermediate lesions (20% to 50%, n = 37) had balanced progression and regression. CONCLUSIONS: When examined as a continuous variable, there was a significant linear correlation between initial lesion severity (% stenosis) and the extent of regression (mm). Therefore, risk factor reduction (dietary therapy, exercise, psycho-social counseling, and lipid lowering therapy) in patients with only mild dyslipidemia results in angiographic regression of more severe lesions (> 50% initial stenosis), but does not prevent progression of mild lesions (< 20%). These findings demonstrate that intensive risk factor reduction in patients with only mild elevation of lipids beneficially influences the morphology of the most severe lesions.     

An efficient electromagnetic-physics-based numerical technique for modeling and optimization of high-frequency multifinger transistors

We present a fast wavelet-based time-domain modeling technique to study the effect of electromagnetic (EM)-wave propagation on the performance of high-power and high-frequency multifinger transistors. The proposed approach solves the active device model that combines the transport physics, and Maxwell's equations on nonuniform self-adaptive grids, obtained by applying wavelet transforms followed by hard thresholding. This allows forming fine and coarse grids in the locations where variable solutions change rapidly and slowly, respectively. A CPU time reduction of 75% is achieved compared to a uniform-grid case, while maintaining the same degree of accuracy. After validation, the potential of the developed technique is demonstrated by EM-physical modeling of multifinger transistors. Different numerical examples are presented, showing that accurate modeling of high-frequency devices should incorporate the effect of EM-wave propagation and electron-wave interactions within and around the device. Moreover, high-frequency advantages of multifinger transistors over single-finger transistors are underlined through numerical examples. To our knowledge, this is the first time in the literature a fully numerical EM-physics-based simulator for accurate modeling of high-frequency multifinger transistors is introduced and implemented.     

Robust weighted likelihood estimation of exponential parameters

The problem of estimating the parameter of an exponential distribution when a proportion of the observations are outliers is quite important to reliability applications. The method of weighted likelihood is applied to this problem, and a robust estimator of the exponential parameter is proposed. Interestingly, the proposed estimator is an /spl alpha/-trimmed mean type estimator. The large-sample robustness properties of the new estimator are examined. Further, a Monte Carlo simulation study is conducted showing that the proposed estimator is, under a wide range of contaminated exponential models, more efficient than the usual maximum likelihood estimator in the sense of having a smaller risk, a measure combining bias & variability. An application of the method to a data set on the failure times of throttles is presented.     

Growth of ZnSe∶Mn Nanocrystals from Vapour Phase

ZnSe∶Mn nanocrystals were grown by chemical vapour transport method using the matrix of SiO2 aerogels. The cubic structure of the nanocrystals was confirmed by powder X-ray diffraction (XRD) and electron diffraction (ED) studies. The size of the crystals was observed using transmission electron microscope (TEM). The oxidation state of Mn in ZnSe nanocrystal was found using electron spin resonance (ESR) spectrum. The room temperature luminescence measurements show the peaks corresponding to both bandgap of the material and Mn in ZnSe.     

Effects of forage level and canola seed supplementation on site and extent of digestion of organic matter, carbohydrates, and energy by steers

The objective of this study was to determine the effects of fat supplementation from canola seed (CS) on ruminal fermentation and postruminal digestion of OM, carbohydrates, and energy of diets containing different levels of forage. Six ruminally and duodenally cannulated beef steers (354 kg +/- 18) were given ad libitum access to six isonitrogenous diets that were offered twice daily in a 6 x 6 Latin square design. Treatments were arranged as a 2 x 3 factorial with two forage levels (70 vs 30% of dietary DM as corn silage) and three forms of CS supplementation including no CS or CS added at 10% of dietary DM as whole CS treated with alkaline hydrogen peroxide or untreated crushed CS. Fat from CS provided 5% of dietary DM. The remaining dietary ingredients were corn, canola meal, molasses, and urea. No interactions (P > .05) between dietary forage level and CS supplementation were observed for ruminal characteristics or digestion of OM, carbohydrates, and energy in the rumen, postruminally, or in the total tract. Fat supplementation from CS did not affect (P > .05) DMI. With few exceptions, fat supplementation did not affect (P > .05) ruminal, postruminal, or total tract digestibilities of OM, structural and nonstructural carbohydrates, and GE. Ruminal disappearance of GE was decreased (P < .05) when diets were supplemented with fat from whole treated CS, and total tract digestibilities of OM and GE were decreased (P < .05) when diets were supplemented with fat from CS in either form. Ruminal pH, concentrations of NH3 N and total VFA, and molar proportions of acetate, propionate, and butyrate were not affected (P > .05) by fat supplementation. Results suggest that fat supplementation from CS (at 5% of dietary DM) as whole treated or untreated crushed had no negative effects on ruminal fermentation of OM, carbohydrates, or energy when steers were given ad libitum access to diets containing high or low forage.     

A hybrid technique of modeling of cracks using displacement discontinuity and direct boundary element method

A hybrid technique to model two dimensional fracture problems which makes use of displacement discontinuity and direct boundary element method is presented. Direct boundary element method is used to model the finite domain of the body, while displacement discontinuity elements are utilized to represent the cracks. Thus the advantages of the component methods are effectively combined. This method has been implemented in a computer program and numerical results which show the accuracy of the present method are presented. The cases of bodies containing edge cracks as well as multiple cracks are considered. A direct method and an iterative technique are described. The present hybrid method is most suitable for modeling problems involving crack propagation.