Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

A universal HF-free synthetic method to highly efficient narrow-band red-emitting A2XF6:Mn4+ (A = K,Na, Rb,Cs; X = Si,Ge, Ti) phosphors

Mn⁴⁺-activated fluoride red-emitting narrow-band phosphors have been successfully used in wide color-gamut white LEDs for liquid crystal display (LCD) backlights. However, highly concentrated and toxic HF is usually used in their synthesis, causing environment and safety issues. In this work, we proposed a HF-free green method, that is, using NH₄F/HCl instead of HF, to synthesize a series of A₂XF₆:Mn⁴⁺ (A = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. The microstructure, photoluminescence (PL) properties, thermal quenching, and applications of the synthesized phosphors were investigated. Using the proposed approach, the phosphors generally showed a pure phase, a particle size ranging from 5 to 45 μm, and some characteristic sharp emission lines of Mn⁴⁺ in the red spectral range. The internal quantum efficiency was varied in a broad range of 69%-94% under the 460 nm excitation, depending on the composition of the fluoride host. Among these compositions, K₂XF₆:Mn⁴⁺ (X = Ge and Ti) phosphors even had a similar external quantum efficiency (>60%) with commercial ones. By combining K₂GeF₆:Mn⁴⁺ (narrow-band red) and β-sialon:Eu²⁺ (narrow-band green) with a blue LED, a white light-emitting diode (wLED) backlight with a color gamut of 87.7% National Television System Committee Standard, color temperature of 8423 K, and a luminous efficacy of 110.8 lm/W was demonstrated. These results indicate that the synthetic method proposed in this work is universal for preparing highly efficient fluoride phosphors used in wLEDs.     

Effect of surcharge loading rate and mobilized load ratio on the performance of vacuum–surcharge preloading with PVDs

The results from three laboratory model tests performed under various vacuum and surcharge loads with PVDs are reported. Different SLRs were adopted to investigate the effect on the consolidation of dredged soil. To measure the lateral displacement, a refitted inclinometer was developed and tested. In the tests, the settlement, lateral displacement, and vane shear strength were measured, and the degree of consolidation (DOC), horizontal coefficient of consolidation (C_h), and bearing capacity were calculated. The results indicate that larger SLR values promote consolidation. The largest vane shear strength, settlement, and C_h values were all obtained under the highest SLR, and the bearing capacity under this SLR was more than double that under the lowest SLR. The DOC was found to increase with the growth of the SLR. However, considering the vacuum pressure was higher in Case-III, the influence of SLR on reinforcement effect may not be so significant.     

基于Cortex-M的嵌入式设备固件更新方法研究

本文提出了一种基于分散加载技术实现Boot程序和用户应用程序在同一个工程编写开发的固件更新方法 .通过编写分散加载规范文件在工程中实现代码存储区分区.为了保证固件更新的稳定性和可靠性,在固件下载过程中引入CRC校验、丢包错包重传等容错技术.实验结果 验证了方法的有效性和可靠性.     

辐照用小尺寸样品力学性能表征技术研究进展

由于辐照空间尺寸限制、降低样品放射性和提高辐照参数精度等原因，小尺寸样品被广泛应用于核反应堆材料的辐照后力学性能表征。本文就国内外小尺寸拉伸、冲击、断裂韧性、疲劳、蠕变和小冲杆等测试表征技术的研究现状进行了综合论述，分析了小尺寸样品测试中的关键影响因素以及数据归一化方法，总结了小尺寸样品存在的问题，并结合我国需求对小尺寸样品技术的发展进行了分析和展望，以期为小尺寸样品技术及测试分析数据进一步规范化和工程应用发展提供参考。     

Enhanced energy storage performance in Sn doped Sr0.6(Na0.5Bi0.5)0.4TiO3 lead-free relaxor ferroelectric ceramics

SnO₂ doped Sr_0.6(Na_0.5Bi_0.5)_0.4TiO₃ (NBT-ST) ceramics were prepared by a conventional solid-state reaction method. Their phase structures, microstructures and electrical properties were characterized in details. It is found that SnO₂ doping could increase the lattice parameters, density and average grain size. A suitable amount of SnO₂ can improve dielectric properties, and affect the relaxor behavior of the NBT-ST matrix, thereby it can effectively reduce the energy loss and optimize the energy storage performance. Furthermore, the energy storage properties are improved with SnO₂ doping. Especially, the 1 at. % SnO₂ doped NBT-ST achieves a high recoverable energy density of 2.35 J/cm³, which is mainly attributed to large maximum polarization of 43.2 μC/cm², small remnant polarization of 5.83 μC/cm² and high breakdown strength of 180 kV/cm. Also, relatively good temperature stability for dielectric performance and excellent fatigue resistance are observed in this composition. These properties are attractive for lead-free energy storage applications.